Outer Limits 4x4 Board

I put a 4.2 in to my 1997 2.8 all I had to change was my drivers side engine mount
I used a 4.2 gearbox but my 2.8 transfer. All the wiring just plugged into the original
Wiring loom. It was a piece of piss

Cheers mate got her done

Do you mean the temp gauge will stop working

Can any 1 tell witch sensor to pull out of the gear box cause my navara is surging in 3rd and 4th

cheers shane

it has a custom flywheel on it i was told the clutch pedal is all the way out
i was also told maybe a vacume leak but i will try the new fluid

i have a td42 with a new clutch it has a clutch booster but after i drive for a while or let it idle for a bit the clutch slips untill i get goin and in top gear it stops and is fine again untill i do the same thing any help would be great cheers todd

got it all workin thanks everyone for your help

Todd

some one told me that older model gearboxs have a aspedo cabel and the rd28 was electric

i have just put a 4.2 in my 1997 gq that had a 2.8 in it i have eveything hooked up and running except for spedo and taco and 4x4 light the wiring harness is all hooked up if any 1 can help with these would be very help full the 4.2 is a 88 model

thanks people very helpful

im goin from 2.8 to 4.2 and the clutch on the 4.2 has a booster on the clutch master cyclinder and the 2.8 didnt can i block it or do i need to get the booster

i think paul at kustom kages does not do it anymore

come on people i need your help

i have tried search and no results no mater wat i typed i just want to no wat needs to be done for the conversion i have engine, gearbox, wiring harness, crossmember so i just need to no wat i have to change or move or anything any one has done this and had troubles with or any help at all would be ...

i got 1000 on mine

my mate has 1 in the front of his it works really well but keeps smashing cvs

its a go fast bits t peice any ideas wat boost i should run its runnin 6 at the moment

hey guys just wondering if any one can help me out.
i want fit a boost controler to my 2.8 gq just want to no wat pipes to conect it to and wat would be the max boost i should run car has done 330000kms and fuel pump is scewed half a turn

ustom kages and eng $1300 for cut shut but does everthin if you want give him a ring 0414399151

where can i get this done on the sunny coast or caboolture side of brissy

thanks mate

thats the 1 he is awesome

thanks patrol man very helpful

i just got mine cut and shut and it only cost me $1300

yeah i cant find anything either

how hard is it to put a 4.2 in my gq and wat will i need other then engine and box thanks Todd

should i go rancho 9000 adjustibles or tough dog 9 way adjustibles it only for a 2'' lift on a 97 gq wagon and does anyone no prices thanks heaps

i want to cut down my gq wagon can any1 help me out wiv names and numbers of people that do it in the brisbane or sunnycoast area