Outer Limits 4x4 Board

I've just had new suspension installed with a 50mm lift on my HJ61.
Axle to bump stop clearance in the front is approx 65mm. My expectation is that the lift should be additional to the stock height (45mm). So I'm expecting 95mm, am i wrong?

Were you parked on an electric fence??

I just sold my hj60 with 560K on the clock original motor. Used no oil, rockers where original with no wear. Serviced religously every 4k.

You won't get nearly much torque from a permenant magent as you will from a series wound motor. I'd go the series wound motor.
Magnets may deteriorate overtime

Test the Thermastat.
Removing it will cause the water to circulate without having a chnace to cool down and overheat the engine.

It's not an oil pressure issue? oil pressure sender wiring?
faulty ignition switch?
Hard wire the ignition see if it goes away.

Here's my HJ60. Just about to turn over 560,000. I purchased it from the original owner with 528,000 2.5 years ago. original motor and head, 2nd gearbox. uses no oil. Religously serviced by the same mechanic since new, oil changes every 4K. 12l/100 with 206c tyres. 14/l100 with 235/85 R16 since i've ...

is the engine running cold? check your thermostat.