Outer Limits 4x4 Board

not mine just thought someone may want it
good swap for your sierra

http://cgi.ebay.com.au/TURBO-M10-AIR-RE ... dZViewItem


cheers daryl

gday all
thanks for the rap deev8
heres a link guys

virtual lift using jeep flairs
http://s92.photobucket.com/albums/l1/toysuzi/
its all on pages 1 & 2

virtual lift to suit wt flairs
i will have to reload stumped pics there missing of the sub albums

cheers daryl

gday all

who wants a super charger for there zook ??
found this on ebay.
seems a little dear but i guess there hard to find

http://cgi.ebay.com.au/SUBARU-SUPER-CHA ... dZViewItem

THREE DAYS LEFT

cheers daryl

Hey, I'm building duals for my hilux, what's the go with the transfers positioning, does the 5 speed transfer go the the rear or does the 4 speed transfer, because of the 5 speed front mounted transfer shifter, any tips putting them together will be great.

Thanks Matt

gday matt
hows it going ...

gday 4x4 hows it going ??

the gemini diesel would produce around 45kw naturally aspirated
from memery.

thay make a conversion kit for the VW GOLF 1.6l & 1.9l diesel in the states to suit sierra.


1.6litre diesel unknown engine specs

1.9litre turbo diesel 77kw -- 250nm :D

2.0litre turbo diesel ...

Ok thanks.


It has no thermostat. That is why the temp never gets into the normal range...

I took it to a mechanic, and one of the leaks is from the rocker cover, but he said he can't tell...only way to tell is to clean it up and then see where it comes from...which is fine if i owned it, but he ...

Santos wrote:
hmmm.. what i want to know is how is the auto RWD box made 4wd?
i skimmed through the thread and you know i can't find any details..


Custom made Jack shaft from output of auto to the standard Sierra/Sammy transfer case, though its in a custom position.. It is a LWB so plenty of ...

G'day guys,

I have recently inherited a noise in my front suspension. The car in question is a 1997 fzj80 40th anniversary auto. It sounds like a sharp crack when the car rolls from side to side, like when cornering, or turning around a round about, or doing zig zags up the street. Its not a dull ...

sorry guys mised your posts
i havent been able to read any updates untill i refresh the page. thats on the whole outers site whats the go there

anyways here you go 151 pics to look over
http://s92.photobucket.com/albums/l1/toysuzi/

cheers daryl

Sort of OT but does anyone know how much lift TJ coils give when run in a zook? I noticed toysuzi was using them in HRZOOK's rig and it got me curious.
anyone?

using commodore coils in rear & tj coils in front it will sit at 18'' chassis height on 35'' tyres.

REAR END
thats keeping std upper ...

sorry ddog87
i only did the virtual lift - 45 sills & rust repairs

its currently getting primmed & painted throught a mate of steves (stumped)

ive got some finished pics of another zook with virtual lift & jeep flairs

cheers daryl

hi guys just wondering wether any one has done a ute conversion on a lwb suzuki sierra iam thinking of doing one to my 83 sierra any pics or pointers whould be greatly appreciated heres the litlle beast that im doing it to



mate thats to nice to chop up :? :cry:

id buy the tub that you chop ...

gday suzuki boy
hows it going ??

as most have already said stay with your 3'' lift
no need to go any higher with suspension or body. when fitting 31'' tyres but i would recommend moving your front axle forward at least 1'' to 2'' just to clear your fire wall/wheel arch on full lock. this can be ...

oozuk wrote:$10 000 if body in good nick

id be asking between $10.000 - to - $12.500

but 10.000 would be a great buy
cheers daryl

rear virtual lift

this shot showing front half virtual lift started & rear only trimmed around 30+mm

http://i92.photobucket.com/albums/l1/toysuzi/stumpedphotos027Medium.jpg

finished shot with fuel filler welded up
http://i92.photobucket.com/albums/l1/toysuzi/stumpedphotos043Medium.jpg ...

gday super zook hows it going ??

got some pics of stumped zook removed body lift
spua - virtual lift - to suit 32-33'' tyres

got some pics with 35'' tyre sitting in place

starting the lift

http://i92.photobucket.com/albums/l1/toysuzi/stumpedfrontvirtuallift007Medium.jpg

more choppy choppy ...

gday muss hows it going

the main problem with using oil coolers for heat exchanger/radiator. would be internal corrossion, due to the unit being made of none coated mild steel.

so if you go that route make sure you use a good radiator coolant castrol/natra
and mix at a min off 33% or a max of ...

gday wooders
congrats on the new born bubs
hope mums doing well.
and good luck with the sleepless nites :-)

cheers daryl

gday

pm sent

you could also use

rear st141 celica (1984-89) rwd coils 360mm 9-10mm wire or
bommerdore VC - VR rear coils 10-14mm wire. 350mm - 370 mm depending on spring specs factory spec or heavy duty/tow pack etc

as stated my sikid
you could also use
180sx/silvia rear coils
180B 200B ...

g,day bazooka

PM sent

cheers daryl

gday sikid-01
hows it going ??

looking into spring for a mates 96 sierra.
could you tell me the compressed height of the 180sx coil, while under your VIT

cheers & thanks for your time
daryl

dang.

i guess ur the 1st ever to ask for a compressed coil measurement while its under a vit.

i'm ...

gday sikid-01
hows it going ??

looking into spring for a mates 96 sierra.
could you tell me the compressed height of the 180sx coil, while under your VIT

cheers & thanks for your time
daryl

I just found out today that its a carby engine not a injected sorry guys

For some reason he thought it was injected

Does the change what the cause might be
------------------------------------------------------------
hey bogan hows things ??
hows the misses uni going ??

the low pressure (in ...

i know of two people that have used the poly bushes
in a light weight sierra
thay didnt last 3 months.

i dont think you can go past genuine nissan trailing arm bush bushes.

just make sure you release your trailing arm bolt tension while fitting the new suspension. bounce all four corners of the ...

I recently purchased a kit to fit yj leaf springs to my zuk. I imported it from the states; Rocky Road Outfitters.

Does anyone know why it wont fit!

I have a 94 stockman and Im suspecting that the spring hangers are different on a stockman to a sierra.

So far I have only tried to fit the rears ...

Hi all justa wondering what other starter motors fit the 1litre big blocks. F10A SJ40 SIERRA, are there any obvious starters off local cars to bolt straight on like the barina/swift etc. any help would be great. thanx and cheers

if you have one please pm me if you wish to sell it. :lol:

just ...

whats the bulge in the bonnet from ? is there a 660 turbo in there ?

its to clear the toyota 4k carby

______________________________________________________

very nice steve
well done on getting a nice clean tray back :armsup:
how does the 4k push the 31 ??

whats the go with your beast ...

rotated pic
aaahh thats better

sorry jim

cheer daryl

what a wanker
why the f#*k would you show a pic of your vehicle parked in the ocean water
while trying to sell it

poor bustard that buys the thing

cheers daryl

Your suzi looks a little like one that was in the first tuff truck, it was high blue, on 39's, v6 3.8, wood tray, buggy rear.
He did not do too well, i can't wait to see some current shots ;)
great project.

http://www.twistedandes.com/gallery/album30/Respaldo_Nov_2003_1891

its using a chevy 3 ...