Outer Limits 4x4 Board

im pretty sure the 75s are a shit load longer..

G'day,
I've recently read that the bonnet scoops on the later model navaras are not quite simetrical.
As in the measurments front to back on the drivers side are longer than measurments front to back on the passenger side. Do any navara owners know for sure?
Cheers!

Sick mate. Keep It up.

37s are fine as long as the rest of the truck is up to scratch. I got mine done a couple of months ago no probs. It's definatly worth speaking to the engineer before the build if possible. Otto, Pm me if ya want and I'll Point ya in the right direction. He will not pass dodgy shit. So don't bother ...

Maybe 5.29 instead....

Yeah i'm looking into 4.88 for my cruiser. Keep us posted. Will be keen if we can get a good price...
Cheers. Steve.

Yeah you can get your steering shaft resplined. I got mine done at a gear makers down here in Sydney for my 40 series. Think it cost me 80 or 100...

I like that gauge set up, but i reakon 190kph would be a bit optimistic on my shorty..

G'day Brendan, I know how to fix your prob. Start by pulling out that 12ht and box, chuck it on a pallet and send it down to me... I reackon that should stop ya wobbles.

Rego and engineer wont be a prob. Not sure on auto length though..

I'll chuck a couple more pics on, just to keep the best
thread on outers at the top of the page.

Some more of my rig. First time wheelin it since built..

http://i392.photobucket.com/albums/pp9/bj42/stucklog.jpg First time out wheeln this arvy since we built mi truck. Put it through a bog hole and got hung up. Had to get snatched out.... The culprit was still wedged under the 40 and got pulled out with me.. After the log incident we got it out on the ...

PM sent Cruzzadude..

http://i392.photobucket.com/albums/pp9/bj42/zdubarm.jpg http://i392.photobucket.com/albums/pp9/bj42/zdoublearm.jpg This is the double arm on my mates 60 series diff. He is actually selling the Histeer with front and rear diffs if ya keen. The front knuckles have already been cut and turned ready ...

GOOGLE "ratio boxes" there is a joint in Sydney that sell em.

I dont know about battery boxes with the wire already in it, but i've moved mine to the back end of my bj42 cruiser using a box from super cheap. I had to fit two eye bolts to the floor either side and used a rachet strap to hold it down. The engineer looked over my truck last week for the spring ...

G'day mate. Last weekend i did this to my cruiser after chopping the rear quarters i got a lenght of thin angle and cut it to suit the shape of the new wheel arch. Then used pop rivets to fix it to the inner guard. Then screwed the rubber flare to the under side of the angle. If you drill the rivets ...

I reckon this 40 should be posted up but i only have a short vid that i stole from this site a couple of years back anyway it has been a great inspiration for me. http://i174.photobucket.com/albums/w117/mick4b4king/th_144ec7b6.jpg This guy is a legend in my book. :armsup: Isn't that a stinkn jeep?

G'day mate I got a 10mtr roll of molded wheel arch flare from a joint down in Melbourn for 100 bucks delivered to Sydney. Ya just cut it to lenghth and tech screw it to ya guards.Sticks out bout 75mm. Or go to Bunnings and get some plastic garden edging and do the same. I'll try look up the joint I ...

My bj42. Still a work in progress. Just started a build up in members..

nice one, thanks for your help.

Nearly finished the spring over etc on my BJ42. I've used a snake histeer kit and very flat springs and with the 60s power steer box the pitman arm only sits a couple inches above the springs. This will obviously hit on right wheel up travel. My question is, Which is flatter, 75 or 80 series pitman ...

coke and hookers?...

yeah cheers Sprungup'. I've seen em selln for heaps more and less.
A bloke off outers offered and bought my rear diff with no centre for 300. So i think 400 is pretty reasonable for a compleate front 40s diff disc to disc.

G'day mate i've got a complete front disc diff from my BJ42 Cuiser if ya keen. 400 bucks. Sydney.
pm or call 0409700132

DNA OFF ROAD, nice truck. Any more pics? Esp the tray?