Outer Limits 4x4 Board

could be very well on the money! it doesnt have any gas!
lost all that when i had to pull the radiator/condensor out to fix some stuff on the front of the engine. thanks for that, i'll check it out further.

Hi guys, Just thought i'd ask here as someone may have a 4x4 b2600/bravo. firstly, i have tried finding courier/bravo/b2600 wiring diagrams/manuals, but cant find anything! if anyone has anything, i'd love it. the problem is, my a/c compressor wont come on! not getting any power to the positive wire ...

well it is my everyday car, so its kept reasonably clean, and thats why i want a half decent stereo as there isnt much else but road noise to listen to. nowhere else really to install 6.5" as far as i can see, only spot bsides doors is replace the factory 4", and i dont think i'll waste my time ...

got some new speakers to fit up, 6.5" splits in the front and 6.5" co-ax in the rear. planning on using pods in the front, just wondering how theyre supposed to attach though? pull off door trim and screw them on from the rear seems to be the only way. and i am going to make new trims seen as though ...

nice work!
you considered putting some sort of scoop or vent over the open cutout on the bonnet, would possibly increase flow to the core, and also cool air into the engine bay in general, then again its also letting heat radiate out leaving it open

dba made drilled and slotted brakes (not sure if they do for feroza's though)
got to pretty much any spare parts shop and ask.
avoid drilled though, they have a tendancy to crack, and chew through pads quicker

just had a look on the DaviesCraig website, and they have an actual listing for cars, and the feroza is listed http://www.daviescraig.com.au/documents/Thermatic_Fans/Thermaic_fan_selection_guide.pdf and here is the fan guide with specs (feroza fan is the last page) http://www.daviescraig.com.au ...

ah okay, i rarely use the ac anyway, just handy to have.
do you have a link to where you hosted those pics so i can have a look?
thanks

let me know how you go, and what thermo you ended up using. i have ac, and would like to keep it, so there isnt much room for anything else in there.

what gearbox does that use? surely not stock!

well its going to a mech tomorrow, so we'll see what done/said besides the obvious exhaust problem.
might make some new trims for it too soon if i can find the time/motivation

just wondering what people have done, or if anyone makes new door drims and rear panel trims for feroza's, as the factory almost cardboard like ones in mine are rather noisy and annoying, made worse by it being such a short wheelbase and rather stiff. the rear passenger one is the worst, previous ...

G'day Names Dave, 21, in geelong. Recently picked up a 94 SX Feroza, was after something that attracts a bit less attention than the usual imports and is ok on fuel, and its been heaps of fun so far! looking to do a bit of work to it as time and money permits, as it is my daily driver too. cheers ...

AVAILABLE:


WANTED:
3 centre gauges (clock, volts, inclinometer)
Passenger side roof grab handle
factory tool kit (have jack and long handle in engine bay, missing the rest)
towbar
bullbar

not quite a weathershield but i found these wind deflectors on ebay UK
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0242683299

ah okay, thanks for the tip. rest of the system isnt too bad, no holes yet.
also think it might need the valve stem seals done, as its used a bit of oil, doesnt blow any smoke though and cant see any leaks. have to get a compression tester onto it first though.
are the seals hard to do on these?

yeah been planning on a complete new exhaust including extractors, and using a commodore cat, or whatever is cheap and suitable, due to bigger size it should give less restriction, and throwing in a new O2 sensor too. havent had the chance to do the valve clearances yet, did pull the heat shield off ...

yeah its got the stock manifold still, might have to pull the heat shield off and see if i can see anything there. prone to crack in any particular spots?

Hi guys, done a quick search but couldnt find what i'm after, it just keeps returning 1474 results no matter what i search? also i have the workshop manuals off warfs but still cant find what i want. anyway... just picked up a 94 feroza with 211k on it, its a bit noisy, sounds somewhat like a diesel ...