Outer Limits 4x4 Board

Thanks for an awesome weekend guys. Cairns crew had a blast. We will be back bigger and better for next year

Stuff engineered and set up in jigs and manufactured by a professional tradesman/company is a lot different to Back yard Bill welding up his own steering arms with a supercheap brand stick welder and farmer rods

oH AND THE iDEA OF WELDING ANY STEERING COMPONENTS GOES AGAINT ANY ENGINEERING PRINCIPALS iVE EVER HEARD OF.
iN BITS AND vw DAVE YOU ARE BOTH WRONG!

dO IT ONCE DO IT RIGHT

I machined my own out of 4140. Get the original drag link and cut the female tapered end off leaving 55mm of round bar. This mesures exactly 19mm or (3/4). .Run a 3/4 unf die nut down this. Now purchase a Trans steering TE619R tie rod end. (suzuki tie rod RHS). Now take a piece of 1"4140 round bar ...

Thanks mate I will try some compressed air but I know the sub tank is full as I can not get any more diesel in there

Checked with test light and both switches are getting power when sub tank is turned off. both switches seem to be clicking

I have an 02 model 79 series with a 1hdt-fte. I am having fuel problems with the sub tank. The tank is full. the gauge also says its full. When I engage the sub tank and go for a drive, upon cornering on going up and down hill the fuel light comes on. Then as the gauge goes just below full, the fuel ...

Or three bonds grey

1HZ 1HDT 1HDT FT Fly wheel bot tension.
http://www.outerlimits4x4.com/viewtopic ... 8&t=218685" onclick="window.open(this.href);return false;

80SERIES

Center Diff lock troubleshooting.
From how it works down to each component and plug pin.
step by step guide with Pictures
http://www.pnwadventures.com/vehicles/t ... eshooting/" onclick="window.open(this.href);return false;

Sorted
http://www.pnwadventures.com/vehicles/t ... eshooting/" onclick="window.open(this.href);return false;

Found the fuse. Found a very interesting info source for trouble shooting CDL problems can the mods please put this in the Bible
http://www.pnwadventures.com/vehicles/t ... eshooting/" onclick="window.open(this.href);return false;

Hi. I have a problem with my 80 series Center Diff lock. I pulled out the instrument cluster to check the light with a test light. When I touched it on the printed circut bord at the back on the CDL light I heard a noise like a fuse blowing and now I have no power to the instrument cluster at all ...

Hi. I have a problem with my 80 series Center Diff lock. I pulled out the instrument cluster to check the light with a test light. When I touched it on the printed circut bord at the back on the CDL light I heard a noise like a fuse blowing and now I have no power to the instrument cluster at all ...

I took the tyres off and had a good feel for movement but I plan on putting a whole swivel hub kit through next weekend and doing bearings and cvs

My cruiser gets a really bad front end wheel wobble sometimes usually between 60 and 80 kph that shakes the whole car.
The car has 2-3 inch spring lift, 2" shackel lift and runs 33x12.5R15 cooper STT tyres.
I never had a problem with this set up and have driven up the cape several times.
It only ...

When you buy a pyro gauge kit, the wiring is tuned to length. If hes's cut it between the thermo transducer and the gauge it will read way out.
guarantee this to be the problem as I learned the hard way once when I was an apprentice

Brunswick diesel do this conversion all the time

Still not 100% happy but this is what I came up with

Im Building up a Warn high mount to fit on my zook . Just wondering if any one has pics of there winch bars. Ive done a bit of searching and haven't found much.
Cheers

About 8 thou backlash and check it prints up ok. Also loctite and torque crownwheel bolts and loctite and toque bearing caps then hit the bolt heads with a copper hammer and toque again. You will need to heat the crownwheel to fit to the locker do not use the bolts to pull it on as it may crack it ...

If your gunna spend $500-$700 on a winch then get a Tigerz 11. Have had mine for 12 moths now and have used it on the trails numerous times and competed in a winch challenge with it. I here the new. comp series ones are faster again. There were 2 or 3 other cars running tigers at the comp 2

http://i416.photobucket.com/albums/pp249/goody2shoes_810/DSC_0322.jpg

http://i416.photobucket.com/albums/pp249/goody2shoes_810/DSC_0049-2.jpg

http://i416.photobucket.com/albums/pp249/goody2shoes_810/DSC_0057-1.jpg

http://i416.photobucket.com/albums/pp249/goody2shoes_810/DSC_0076.jpg ...

Whats the go with lockrite waranty. I appear to have stripped one on the weekend

Is it still raining in Mackay. Its been Pissing down here in Cairns since Wednesday. Its making practice runs and preparation hard

I have a Mazda 121 Throttle body injection unit and complete un cut wiring harness from the car and ecu. They are a 1.6 ltr. This may be easier then a falcon setup. Im chasing $200 for it all
look in the bible for rhetts injection

Only a rough itinerary has been done.

Yeh semi should be no worries. There's been a change in location, but all still ok.

Hey bear. Was just going through the rules.
Whats the go with the window nets. Do you require ones with the weld in tabs and quick release pins on the bottom?

Im keen, do you have a link to view these lockers?

I have a twin locked 75 series and have notice that in that scenario, if you switch them off they dont unlock if they have torque on them where an auto locker, thats when they do unlock