Outer Limits 4x4 Board

Hi
When the lights are flashing they are waiting to lock.
some times they will go straight in if you are driving or you may have to move the truck from left to right to change the relative axle position to line up the splines
The lights steady when the diffs are locked

Also if you have been in water check all the plugs for water ingretion or corrosion
Ray

Hi
Before you get too carried away
I would suggest that you check all the switches involved, 4 switches
Alos check the mechanical lickage, the high/low lever has been know to come loose under the centre console.
Check power supply as mentioned
If you have a manual there is an external wiring ...

Hi Folks
I would like to cut down an 80# and change it into a tray back or table top as Ibelieve you call them, I would welcome any info as to the best of my knowledge it will be the first in New Zealand
I intend to use this truck for winch challenges
Ray

Hi
The centre difflock is activated either by using the push buttom on the dash or by sellecting low range
If after selectin high range and or turning off the switch and slowly driving the truck the light should go out
The most common reason for the diff staying locked is the use of different ...