Outer Limits 4x4 Board

just checked that have been slack and just letting my gf borrow my car instead of fixing hers. is that the charcoal canister pipe? when i blew into it it filled the secondary valve with fuel. then i started it and blew into the pipe and was just like when it was off.

yeah i had a float problem on my sierra aswell. but on the vitara the float is all plastic and cant be adjusted but it seemed to close the seat before hitting the top of the bowl.
can a fuel pump somehow stuff up and be forcing fuels in? can i check that by taking off the fuel line and blocking it ...

just checked the choke again and its fine. i did notice that fuel was excessively coming out of the jet in the secondary venturi, it was erratic for a bit but there was fuel pooling on the throttle valve. anyone with diagrams to adjust or rebuild would help heaps

yep ive checked the choke and it is operational comes on when first started then slowly opens as it warms. was adjusted to open slightly faster because the vitara seems to keep extremely cool like under 1/4
ive downloaded a manual and had a look at another and they have nothing about vacuum hoses.

having carby problems still, burning heaps of fuel, no power and spluttering over 2500rpms. major carbon deposits on spark plugs and a bit of smoke and soot coming out exhaust.
it gradually got worse but i replaced the vacuum advance unit and cleaned the plugs and when great for a few days then went ...

hey yeah ive tried to have a bit of a search but couldnt get the right answers. so heres the problem.
its my gf's 92 auto vitara carby model and in the morning it starts but then sometimes stops when the accelerator is pressed but will start again straight away, you have to give it a few good revs ...

hey all yeah i would like help with info on how to wire up a plug for a trailer?
im about to get a boat on monday with a trailer with a 7 pin round plug.
ive looked at the bible and did a search and many told how to wire up these plugs but none were specific to sierras.
since sierras have a strange ...

nice build up and nice work. wondering do u know what is involved in getting a gti conversion sierra regoed? hard? cheers

kewl kewl, well ill definitely look out for those engines basically see which one pops up with the best bargain relative to their common sale price, is their much of a difference between the G13A and G13BA? ive got the G13A and since it is my first time i might go for just a replace engine or the ...

thanks, yeah had a bit of a read on the G13BB motor couldnt find much on that conversion but heaps about comparing the G16BB with them. but if Gwagensteve says its easier i believe him, so anyone know of a G13BB motor round northern NSW??? and about what price range for one???
back to the GTi motor ...

the G13BB motor is that from a jimny? lots of people say thats better because the power with low revs, i dont seem to be able to find many of those engines for very cheap.
yes i know conversions should be done properly and they do cost alot of money but my sierra has rego till august so dont want to ...

kewl kewl, he doesnt say much on the actual engine change and stuff.
lol does any one want to come to lismore and do a GTI conversion???

hey all, yeah i went out 4 wheelin the other day just on my property with lots of grass and my sierra just cut out on me when i stopped, thought the idle must have shook loose so adjusted it and away we went and then it happened again and again it just wont idle. i read what i could on here and am ...

yeah i just done that uni, you just buy the spider (cross member) and comes with the bearing caps and clips. cost me $20 from a bearing shop, mine got worn out cos drove on the beach i think it rubbed out the grease and wore out the bearings and all fell out, this gave it free play so taking off it ...

does any one have a sierra manual that includes the 89 model swb sierra sj50? and if some one does would you be able to post up a couple of pics of the page taking out the rear axle and replacing the seal.
i have searched alot about tis and all i could find was the sj410 style one so thought they ...

yeah, got mates but i just dont trust their mechanic diagnostics, they always think they are right and rarely are, but since its a soft top the sound travels freely and sounds like the passenger side rear wheel, only happens now a bit in frist when taking off quickly and a bit in second.

oh kk, if it only ticks once each time you turn the key then sounds like the same prblem of a loose connection somewhere, if its continuous clicking fast like cogs slipping your starter might need replacing. good luck.

with my swift (same engine) sometimes the electrics inside would work but tryin to start it it would only give one click but not even try to turn over, this was the battery terminals werent connecting good enough, would just have to give them a good twist to make a good connection. i your engine ...

kewl kewl, will have to try that next time it happens, also the rattle sounds like a bearing from the back axle, any ideas? thanks

lol very nice very nice, well yeah i would install a UHF if i could find one for cheap, but since i have a sound system and no uhf ill put in the soundsystem. no reason wh you cant have both

lol well was going to be more han an average system kinda for display and removable but customised to suit fastback sierra. this was the last one i did, 2 x amps, 2 x 12" subs and 4 x 6x9's but meh doesnt bother me not to post it up.
http://www.boostcruising.com/forums/index.php?s ...

very nice. like your diff aswell lol

yep brick has it right.
parallel is mostly the favoured choice, best way is run two wires from the amps positive to the subs (one wire to each subs positive) then two wires from amps negative to the negative of subs, if the subs dont respond as good as they should its possible the wiring inside the ...

oh ok, havent really heard much of sliders i must say but then again i would be considered new to 4wding but grew up on a farm near Mudgee so have learnt a ew things over the years but only now actually learning more technical things for myself.
ive seen quite a few sierras with sidesteps but they ...

hey yeah i was just wondering how people have done side steps on their sierra? couldnt find anything on it in the bible so wondering if people could post some pics of how they have made their steps and where it bolts on. thanks.

haha nah im good. think i would go with the highsteer when i eventually do it, would like to find a sierra to work on.

ok so was that straight in the top of carby?, also been hearing a kind of metal grind squeak while turning hard corners and accelerating (like a round about) sounds like its coming frome the back axle but havent had a chance to look at it, only started today not that bad,

hey yeah i was wondering if anyone could help me with my sierra engine, its a 89 sierra with the G13ba motor, first IT IS NOT THE IDLE.
every now and then after driving for a few minutes the engine decides to rev around the 2000rpm mark, when you push in the clutch it will stay at 2000, tapping the ...

kewl thanks, see that was a good useful answer the other guy just said there is a reason why you go high steer but didnt tell the reason, just when i was looking at mine it looked like the wheels would hit the springs before the drag link but i wouldnt want the bump steer anyway. thanks for that.

haha well yeah it is holidays but im not a school leaver, just finished a uni degree. i do have decent skills at welding (more than average) have been learning lots of fabricating stuff but no i was not thinking of welding it myself, was just asking a question
thanks Gwagensteve for actually giving ...