Outer Limits 4x4 Board

I'd go back to the start of the problem, my 70L fridgemate gets 3 full days off my duel battery system before it goes to low power mode, I ahve changed the wiring a bit, got some anderson plugs and thicker wiring instead of that long cigarette plug one that has a bit of voltage drop in it. How many ...

hi Mike, you will be able to fit 15" rims on your ute, you will need to look at offsets if you are going to get a bigger than 30" tyre. for the exhaust a 2.5 is fine if it is mandrel bent, if you are going pressbent get 2.75 or 3" and do the dump pipe aswell, as doing just from there will help but ...

There are some of the isuzu turbo's that can be rotated, care needs to be taken coz if the bearing dislodges you are screwed, i am unsure of which turbo's turn and which dont, but jump on http://www.clubisuzu" onclick="window.open(this.href);return false; and there is a heap of posts on there about ...

Whats the easiest way to index the bars?
jack it up to the appropriate height plus a fraction and then put them back in?

The ball joint "flip" doesnt get you any extra height really, just regains some of the downtravel you lose from cranking tha bars right up and helps fix the camber problems you will ahve with the front wheels looking like \/ It is more of a joint relocation as all you are doing is bolting the mount ...

Hi, as the title suggests i was wondering the benifits of these options... not too fussed about lighting up 1km of road infront of me, jsut want to see whats coming and in the bush a bit on the sides i was thinking of getting a spot and a flood in the 10 inch led light bars is anyone running these ...

I have a supercheap calibre gauge, the one with the blue backlit led in it,
This is my 5th one as i took the first 4 back, i know that some gauges rattle a bit, but these ones were actually loud and my stereo didnt help
apart from that they work ok. goes back to 0 etc etc

from memory the combination on these is 4540 or something that is 1800 more than the loaded car itself tare of mine is 1700 having said that i regualarly tow a 1t tralier with a commodore on it (which weighs just under a ton as its a bit stripped out) and never have any problems just make sure the ...

Most 4jb1-t dont like it if you fill them right to full either...
there is a picture of this under the bonnet of some
i filled mine to full and the oil came out the pressure side of the intake :-( made a bit of a mess
now i fill it to about 10mm below the full dot

have a look on www.clubisuzu.com
lots of info there

Hi melcor
could you please post a diagram of what you do for the manual override switch? im about to oput in a dual battery setup with the second battery in the back of my ute and have been wondering how to wire it all up properly

While we are on the tank topic,
saw a bloke the other week pump his tyres up in less than 3 seconds each.
what i want to know is how?
the air hose was quite large, but is he using gas instead of air?
and how much flow can a normal valve take? or would he have to have an open one way hole for a valve?

not sure, i think they differ. but if it has a plastic cover its a blet, and metal its a chain.
jump onto www.clubisuzu.com

Hi, I bought my old mans 98 TD Rodeo, is a great ute :-) mine gets about 9L/100km with 30" AT's so your economy is good, but im on the highway a lot so is a bit higher than normal. With the suspension i am looking into a 2" suspension and a 2" body then run 32's this seems to be the way to go. As ...

jump on www.clubisuzu.com
there maybe a few on there for sale and if not there are many mu enthusiasts that will be able to help you.

I would also like to know, am after a 3" preferrably or a 2.5" if noone makes a 3.

Jump onto www.clubisuzu.com
this has been discussed a few times there

All you need to fit bigger tyres to a commodore is an angel grinder... or take the front quarter panel off.
I have a VH wagon with 31's on the back, it just took a bit of grinding to get the tyres in there

Hi Ben,
on another note,
there is many isuzu and rodeo owners on Australia4wd.com, have you considered joining there and posting?

Geoff

looking at the exhaust and intercooler and front control arms....
sounds good that someone is making it easy to get these parts instead of having them custom made