Outer Limits 4x4 Board

gday i have a gq lwb with a OMVL gas system. convertor is mounted right up against the firewall on the passenger side . and i have a ZD30 airbox, dual battery tray and my winch controller box all mounted on the passenger side running along the inner gaurd. if you still havnt done yours i can post a ...

hey yer the tb42's are pritty good for water. i havnt had issues with mine. Just make sure your snorkle is all water tight. Breathers are easy to get to my patrol had all breathers fitted from factory not sure if all do. they are just rubber hose and then steel line running along the chassis rail ...

mine where the rears and as i said they are a prick to do, a friend gave his to a auto shop to do and they said nah cant do them to hard, if you have a press and a few pieces of steel to press the bearings out u should be fine, i used the outter bearing races and machined them slightly to press the ...

gday i got my set of rear wheel bearin kits for $92 each side brand is skf and i got them from repco. have fun doing them yourself i needed to make a special tool it was a 2 1/4 socket that i sliced the drive off and bored a hole in it and mounted the drive off the side so you can slide the socket ...

hey guys i have done a auto to manual conversion on my GQ LWB WAGON 4.2 petrol carby. now everything is done besides my reverse lights now i know that majority of the auto plugs are next to the battery tray but on the manual the reverse switch plug is on the top of the gearbox now all i really ...

hey thanks for that but i thought the solinoid at the front of the carby cuts fuel into the bowl but the solinoid at the back of the carb would cut fuel into the carb idle circut which should make the the engine die instancely if it was at idle shouldnt it? do u know anyone who has used this ...

Gday i am resonably new here and i have a 1988 gq patrol 4.2 dual fuel i also have been playing around with my gas system by running flexible gas line and mounting the gas line up nice and high out of harms way anyway to the point of my quesion i have rewired all the wiring for the gas because it ...