Outer Limits 4x4 Board

I've got an 02 105 and have found that if I put the boot down so goes my economy. Have found that on the highway if I keep it around 2200rpm (about 98km) then I will get 20/100. Have fitted a UniChip the otherday and although early days yet, it is a far better truck to drive and looks like I should ...

what sort of l/100kms are you getting? I had a v8 100 and sold it due to the crap economy with 2" lift and 33's.. would always avg 20-22l/100kms normal driving.. I could get it down to 18-19l/100kms if i babied it.. pretty sad really. In my research before buying the v8 i recall reading the v6 4 ...

Hi guys, i bought a 4.5 ltr petrol automatic 105 cruiser a couple of months ago, has every extra on it that you need, winch, air lockers, lift kit etc etc but stuff me talk about thirsty, it is on duel fuel but that doesnt really help much either, is there any secrets on getting better fuel economy ...

What was the outcome , can a landcruiser be sprung over in NSW and legally registered

G`day can anyone help me with names and numders of engineers in N.S.W that can engineer a nissan swb with 4inch lift 1inch body on 35`s can`t seam to find any thanks I spoke to this guy last week about a spring over and 35's on a 40, he said if the rims were not too wide he will do it 0403 328 574 ...

Rang around today and most engineers dont even want to know about it, 2 said they will look at it but it needs a lane change test done, has to go to Orange to do it, $500 to $1000 and engineers report is anywhere from $500 to $1500, anything over 2" lift needs to be engineered, no body lift and only ...

Hi guys, can you still get a 40 series landcruiser engineered in nsw with a spring over done

Thanks

Thanks everyone for the info, back to the drawing board i guess,

just sold my petrol 100 series cruiser, 4 - 4.5 k's to the ltr gets a bit expensive so thought i would look at a patrol.

Hi guys, maybe looking a buying a nissan patrol but not sure which way to go, i can get a late 2003 GU 3ltr turbo diesel automatic for 20k and a 2001 model 5 speed with a lot of extras for same price, been told fuel pumps can be a problem and expensive, if so is the 03 model pump better than the 01 ...

popeyehj60 wrote:sounds the clutch master is leaking internally. by passing.
check the firewall on the inside for fluid. thats where the leaks show up.

Its not loosing any fluid at all, not a drop

Hi everyone, i have a petrol 6 cylinder 100 series and if you rest your foot on clutch pedal it will slowly go towards the floor and if you hold clutch in at lights etc you end up with next to no clutch but let clutch out and you have full clutch again, no oil loss or leaks, any ideas
Thanks

Thanks Hamo and 4_low, havnt heard of them b4, i guess they are similar cost to air lockers, ill look into it a bit more.

Thanks guys

Hi guys, what is a good pipe bender to buy, need to bend 1- 1 1/2" stainless but a good alrounder would be good, who sells them around the Penrith area, dont want one of the $200 chineese, ebay ones
Thanks

Hamo wrote:From report's off other forum's , The new design ARB arnt cutting it any more.
Maybe there now made in china too..

I went with Eaton Elocker's

Hamo

What are the Eaton Elockers

Hi guys, anyone know of a engineer that will approve an engine conversion in a 60 series, was told TIC are no longer in buissness, im in the Windsor area.

Thanks.

It has been for sale for a long time. This one would be better,

ebay item number 320313835511

bludgerswife wrote:

tuff 45 wrote:Are you allowed passengers while you race.

Thanks.

Have forwarded your question to Dave & will let you know his answer.

Cheers
Ros

Thanks Ros

Tony.

Are you allowed passengers while you race.

Thanks.

I sent a money order a couple of weeks ago and have heard nothing, is there a contact number.
Thanks.

I've put 75 series diffs in a 45 series with no problems.

Ive seen a 40 series cab on a 45 series chassis and looked good but the tray on the back was only small, why not cut down a troopy like they do with 60 series wagons.

Thanks guys, i have a complete 40 set up here but i think i will sell it and go the 60. I have a 60 box here so which are the best steering rods to run with it.

Tony.

Hi guys, what is better to run on a 40 series, either genuine 40 series power steering or 60 series power steering.

Thanks.

Hi guys, im building a 40 series and need to cut the rear guards and wondering if anyone has pics of 40 series with the guards cut, a lot of people would have different ideas etc.

Thanks.

.... Hobzee sells products on the internet with almost no profit and relies on volume to make his money. Ahhh the publicity is priceless - thanks... So there you have it guys from an expert - for cost price bargains give us a call.... I just bought a pressure switch off Hobzee on ebay for cost ...

M1S3RY wrote:Check this out: http://www.offroaders.com/tech/ARB-air- ... agrams.htm

Thanks heaps M1S3RY, thats perfect.

Tony.

Hi Guys, i have just fitted a pair of air lockers to my 40 series and need a bit of info on wiring the switches. I have got new switches and they have 5 male terminals on each switch, i guess one is earth, one is power in, one power out and one would be the light but not sure on the 5th one and what ...

Hi guys, i have just done a reverse shackle and spring over on a 40 series and the shackles are flat when sitting normal, any ideas how to fix this, are the shackles too far forward or too short.

Thankyou.

Is it still on, need to organise accomodation, 40 is nearly finished.

Hi guys, which end is best for carden joints, diff end or transfercase ?, does it matter if the shaft is bolted to transfercase or only the slip yoke bolts to transfer.

Thanks.