Outer Limits 4x4 Board

wb800- i pulled the vac lines off the solinoids and it didnt change a thing. im thinkin its either a drivers side axel or cv. but then im unsure if it is as the car drives fine and makes no noise just no 4wd. the axel turns with the plenatry gear on the drivers side but no wheel movement which says ...

Pull the vac lines off the actuator and see if that makes you drivers side drive.
I had the same problem, Now i run no vac lines to the actuator and free wheeling hubs.

HI i hav a NJ auto 3000
In 2h no problems
in 4h 4L i have a noise from the front axle or CV's
Driving straight and turning right under power a loud clicking noise but if i turn left just a little the nose goes away
Any help to point me in the right direction would be great.

Looks Awesome mate

What options do i have for a front lokka ?
My car is a 94 swb 3000 v6 auto.
Thanks Colin

Sorry yes it is a injected v6 1994 auto swb NH.
Where do i get one aftermarket ?
I pull it out and cant see how to get it apart to cleen ?

Got a Idle problem
Some times it reves up to 1400 rpm
But most of the time it idles at 800 but is running rough and very fumey
At 1500 revs it runs great.
Any pointers would be great

4.1 diffs 1ltr transfer 31" tyres on mine in 5th gear is 100 @ 3500
in 4 gear 100 is 4000 on the GPS

Mine hasnt, i thought Mitsubishi wouldnt be that silly. Any ideas where to get one.
Cheers Colin

Do pajeros have a plate between the bell housing and the motor to block the gaps around the motor and stop water, mud getting in.
My V6 NH doesnt, every time i go in the mud it gets on my clutch and makes it slip.

Plate in the wrong way round ?

You cant mate i had the same problem. i got a transfer box frrom a wreckers for $250 instead. was quoted $700 just for the chain.

Hi Ive been trying to get a 1 lt transfer but no luck. i have a wt with 30" muds on and cant use 5 gear. If i put 6.1 crawler gears it will i be back to nearly standard gearing and be able to get to 100 on the hiway and use 5 gear. Also how low will low range be ? 1st low will become 5th low if that ...

Yes it sounds bad only in 4 lock and under power, fine in 2 wd

I have a clicking jumping noise coming from my transfer. Would it be the chain ? is there any adjustment or would you know where to get another box . Im in brisbane. Thanks