Outer Limits 4x4 Board

am i the only lucky bugger to find two sets of 4.556 ratio diffs in 60 series.one set i swapped for a set of 3.7 and the other set i got for $300 but they came with a stripped 60. both are out of 60's with 2h and a440f autos in them.
one set i put in my 80 series and got a hi pinion head out of a ...

i put a 12ht into a bj74. cut off b series engine mounts and made more, i had a a440f auto in mine. had to move the transfer case crossmember back in the chassis 4'' (100mm) so that the radiator fits, can't remember if i had to change the inlet/outlet on the radiator. modified the driveshafts. your ...

how much grunt does it have comparied to before?
what do you know about the pump you have put back on?
recheck your timing, almost sounds like your timing is out.
did you replace the fuel filter and lift pump on the injector pump as well.
there is a gauze filter at the inlet pipe on the lift pump ...

i have a friend who is a turbo whiz in nz his name is steve murch of motor sport engineering. he has fully worked, balanced and all the other stuff needed (fully raced for a need of a better word) for me for $850.00nz exchange. goes awesome at 11psi

check and see if it has the bolt holes on the side where the vac actuator is if not you can drill and tap them to make it fit or replace the transfer case housings from one to the other.
hope this helps