Outer Limits 4x4 Board

I have had to use a HZJ75 series flywheel in my HZJ105 series it is 6 mm narrower then the fly wheel on the 105 but the ring gears are the same . we spaced out the clutch fork pin with 4 x SS washers so that the fork sits out 6 mm further as well , so it shouldn't have changed the fulcrum. can ...

Holy cr@p that looks shit hot very well done mate
and where did you get the V8 Bonnet skin from

quick question for all you fellas in the know we have a 97 lux with the ECOTEC motor in it do you's reckon that the 2.8 diesel snorkel will restrict the air flow to much (i am guessing yes ha ha) or are we gunna have to make a custom 3 " snorkel for it. i would like it if the standard snorkel would ...

i am keen on the old 12HT if you end up getting rid of it

cheers

i am with brent i reckon you would have to hit the soup bowl at 100kph to get through that s%#t, and yeah it was the best weekend i have had in a long time

yeah its not a great deal of oil , i only noticed it because i was doing a service on it and noticed they overtightened the bottom clamp(stripped it) and a bit of oil was on the turbo i then went and put some flash clamps on it

a mate said a lot of truck owner's run the rocker breather in through the chassis and let the little bit of oil run through it. but i reckon i will run the catch can/tank by the sound of it , i don't think it can hurt anything (i hope).

cheers

i don't know if you were talking to me or the other fella but yeah i know its got to go between the rocker cover and the intake , i am gathering that it dumps the oil in the catch can on the way through.
is there a proper one i need to run or will any catch can/tank do

cheers

i just fitted a denco turbo to my 105 and am getting a little bit of oil in the vac side of the intake a mate who is a fitter said its normal and to just put a OIL CATCH CAN/TANK on the rocker breather then back to same position is that all that it's needed

cheers