Must renig my box has not leaked a drop yet
And my wrist is back now have a YZ450 and a 500 suzuki quad
Ferrit machined his adaptor plate to fit the seal supplied with the kit.
The seal supplied with the kit is wrong for aussie 21 input tooth transfercases and is fine for the 23 tooth USA ...
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Search found 6 matches
- Tue Nov 09, 2010 8:35 pm
- Forum: Cruiser / Prado
- Topic: R150 gearbox & transfer into LN106 Lux????
- Replies: 14
- Views: 2780
- Tue Nov 09, 2010 8:29 pm
- Forum: Cruiser / Prado
- Topic: hilux gearbox rebuild/ interchangability/
- Replies: 10
- Views: 1520
Re: hilux gearbox rebuild/ interchangability/
Do yourself a favour ...
I had much the same troubles as yourself which has now been solved 96 LN106R SAFARI turbo 33IN wranglers and I was forever blowing gearboxes. After a reco box lasted 2500km (box no 4) it was time for an upgrade. I do not drive my lux hard all day every day but when the ...
I had much the same troubles as yourself which has now been solved 96 LN106R SAFARI turbo 33IN wranglers and I was forever blowing gearboxes. After a reco box lasted 2500km (box no 4) it was time for an upgrade. I do not drive my lux hard all day every day but when the ...
- Fri Jan 29, 2010 2:54 pm
- Forum: Cruiser / Prado
- Topic: adaptor 21-23 spline
- Replies: 5
- Views: 538
Marks 4wd adaptors have the 21-23 splile couplers. I used one in my R150=gear driven tranfercase conversion
http://www.marks4wd.com/products/advanc ... _CD_GB.htm
http://www.marks4wd.com/products/advanc ... _CD_GB.htm
- Fri May 08, 2009 11:17 am
- Forum: Cruiser / Prado
- Topic: R150 gearbox & transfer into LN106 Lux????
- Replies: 14
- Views: 2780
- Wed May 06, 2009 10:51 am
- Forum: Cruiser / Prado
- Topic: R150 gearbox & transfer into LN106 Lux????
- Replies: 14
- Views: 2780
Clutch was all good using the LN130 housing there was no need to extend the input shaft.
I looked up the trailgear adaptor but the bloke on the phone reckoned that the coupler that comes in the kit does not suit the 21 tooth input shaft on our gear driver transfercases you have to change the shaft ...
I looked up the trailgear adaptor but the bloke on the phone reckoned that the coupler that comes in the kit does not suit the 21 tooth input shaft on our gear driver transfercases you have to change the shaft ...
- Tue May 05, 2009 3:06 pm
- Forum: Cruiser / Prado
- Topic: R150 gearbox & transfer into LN106 Lux????
- Replies: 14
- Views: 2780
Hey bud I have a LN106 turbo and after 4 G52's it was time to put in something stronger.
I just did this conversion and its a piece of p!ss! I believe its money well spent them G52 boxes cant handle torque from slower revving diesels i have seen them last ages behind a holden V8, I strongly suggest ...
I just did this conversion and its a piece of p!ss! I believe its money well spent them G52 boxes cant handle torque from slower revving diesels i have seen them last ages behind a holden V8, I strongly suggest ...