Outer Limits 4x4 Board

thanks

Hi,
Was wondering if anyone could direct me to other forums for toyota's.
Not wanting to steer away from this one just want to know what else is out there
Thanks

Thanks guys will lookin to all sugestions

I was wondering if anyone knew of someone who makes up bash plates for the underneath of 80 series cruiser? Im dropping mine down from a 5inch to a 3inch, will I still be able to run 35's? Dose anyone know where would be the best place to sell a set of 5inch superiour drop arms, I tried on this site ...

ok just wanted to get an idea of where everyones oil pressure is sitting on the factory gauge at idle. Mine uesd to sit 3/4 when cold and 1/4 when hot, checkec it wit a guage and found pressurs to be more than fine.(480kpa when cold and 250 kpa when hot). The book says that as long as you have more ...

Can anyone tell me what id be looking at paying for a second hand 1-HDT complete as apposed to a reco. thanks

84sloth wrote:i am in need of a rear housing for my 75 ute. i can geta 60 series with front n rear lockers cheap. am i able to use the rear housing out of the 60 series and put straight into my 94 hzj75? any help would be appreciated

I got a housing out of a 75 its your for $50 bucks if ya want it.
P.M. me

i have upgraded to the 16inch wheel brakes great mod. what you need is -new front calipers from post 8/92 -new front backing plates from post 8/92 -new rear backing plates from post 8/92 you rear calipers are the same so you dont need new ones new bigger dba slotted rotors front and back 100 series ...

Hey fellas was wonderin if someone could tell me what I need to buy and fit to make my 8/92 80 series stop better. I did a search but dident find the info i needed.
Thanks in advance

$7500.....your mechanic has ripped you off. For that kinda cash it should drive like a dream. I'd be takin it back to said RIP OF MERCHANT and makin him fix it for that kinda money, A fully reco box and transfercase can be bought forand installed for just under $5000. It realy gets me goin when I ...

Was thinkin of puttin a ironman 12000 pound electric winch on the front of my 80. Need opinions on if it will be big enough and if the brand is o.k.
thanks

Hey guys, I know this hsa probly been coverd before but I cant find any thing. I got a 92 80 series with a 1HDT engine in it and was wonderin how much trouble it would be to swap a 4.5 ltr petrol into it. Ant help would be a big help. Also dose any one know roughly what thes engines are goin for and ...

I am chasing the pcd of the wheel bearing nut of the rear of the 80 series. I've tried a few stores and some don't even know what your talking about, Toyota said they can not sell me one. So, I'm going to make a few so need that info before I pull it apart. Cheers in advance... You cun purchase ...

make sure everything is tight - all suspension bushes and bolts, steering joints, kingpins, steering box adjustment, wheel bearings. everything that bolts together or is adjustable. if it feels like a truck to drive, it is mostly because things have got sloppy. my 80 has 5" lift and apart from ...

make sure everything is tight - all suspension bushes and bolts, steering joints, kingpins, steering box adjustment, wheel bearings. everything that bolts together or is adjustable. if it feels like a truck to drive, it is mostly because things have got sloppy. my 80 has 5" lift and apart from ...

make sure everything is tight - all suspension bushes and bolts, steering joints, kingpins, steering box adjustment, wheel bearings. everything that bolts together or is adjustable. if it feels like a truck to drive, it is mostly because things have got sloppy. my 80 has 5" lift and apart from ...

dumbdunce wrote:
land8079 wrote:
Is it the same for a 1hdt?
yes exactly the same pump.

Thanks

Where is it leaking, is it leaking ps fluid out or letting engine oil into the fluid. If its leaking ps fluid out it is a very simple repair and if your half handy you wont need a manual, just split the pump replace the o ring and bolt back together, if there is no eng oil in the ps fluid dont ...

Get the vehile to operating temp and sut her down. Then grab hold of the fan and get some one to start the vehicle for you. If the fan hub is knackerd you will fell verry little resistance on the fan. Whilst it is running let it go and then shut engine of whilst watchin the fan, if its stuffed it ...

A mate of mine did it him self in his shed and got it all leagl.
P.M. me if you want his phone no as i know he would be only to happy to fill ya in on all the little issues

Could some one tell me how to work out the length of my front and rear panards on my 80 to suit a 5 inch lift.
thanks

Can anyone point me in the right direction of where i might get the template and fitting instructions for putting a safari snorkel on my 92 GXL 80.
Thanks all in advance

Thanks guys for all ya help. sounds like i need to spend some more time on my handbreak, might try a new cable i think.

How steep are you talking. Might help. 40 degrees plus, can only see sky. Dose any one have any tips on adjusting the hand break as ive done it how the book said(step by step) and it still wont hold. Gotta pull the leaver all the way up before it even looks like holdin on.....maby i need a new ...

thehanko wrote:you can always pop it into low range too. its the toyota handbrake

Ive tried putting it in low range and it still creeps backwards

Just wonderin if any one can shed some light on this for me. I got an 80 series GXL wagon and have found that if i park it on a verry steep incline, with the hand break on (its poo) and in 1st gear low range that it will roll backwards verry slowly. i thought mabey rings but it dosent use a ounce of ...

but saying that i would stil have the disk arse end anyday.. i just park mine in low range all the time.

I got a gxl 80 turbo diesel and have found that if i park it in a pretty steep incline, put it in low range withe the hand brake on it will still roll back verry slowley.

mate go the 80 series chassis as two my mates have done it and both are approved in qld. Body mounts are not a problem as one of the rears is in the right spot and is able to be used a arefence point to place all the others.

Go the 75 cab on 80 chassis, works realy good. two of my mates have done it and its awsome

mule75 wrote:caster plate welded to housing wrong?

the plates are bolt on and yeah ive done the panard rod bushes, rod are also adjustable.

Outer Limits 4x4 Board

Search found 34 matches

Re: other toyota forums

other toyota forums

suspension height and under body proyection for 80 series

Pricing a 1-HDT

Re: 60 series 75 series diff housing's?

Upgrading brakes on 80

Winch for my 80

Engine swap in 80 series

Re: 80 rear bearing locknut PCD

Panard rod length

Snorkel on an 80

My 80 wont stay on a hill