Outer Limits 4x4 Board

hi all just wondering if anyone still sell xlinks and if so where i can get one from thanks

thanks heaps time to spend some more coin

hi all just wondering if it is possible to fit gq superior draglink and steering arms to gu diffs.i understand diffs are wider but didnt know if they make longer ends to adapt them or if im up for new ones

hey bud ive just had the same problem wat you will have to do is split the centres from the crown wheel then mix and match your original centres to your new crown and pinion.if you are not experienced at this dont try this at home cause if you dont set them up properly it will not be pretty. your ...

its a td42 im getting a new radiator in the next couple weeks might gat a new hub whilst im at it cause with me also bolting a turbo on in the next few weeks i wanna get this right first thanks for your imput guys
dont buy cheap chinese shit mate you get what you pay for with radiaters !!

thanks ...

its a td42 im getting a new radiator in the next couple weeks might gat a new hub whilst im at it cause with me also bolting a turbo on in the next few weeks i wanna get this right first thanks for your imput guys

hi all just wondering my gq getting hot when towing or on hills not too sure if its got to do with the body lift any advise please
ive had radiator checked and put some oil in the fan hub still gets hot

so im guessing out of all this if your pre 95 your donk will be fine to turbo

ive had this problem as well if you have a body lift it will also make it run warmer as the fan is now not in the center of the radiator shroud and wont be working efficiently also you buy the oil from toyota as they to have this problem it will be about 10.50 a tube best off buying 2 of them unbolt ...

scott/gqfun wrote:what gq's did 4:3 come in just the utes or did the 3l petrol have them to

the rb30 3 ltrs had 4.3 ratio aswell yes

hi all im just curious i have a gu auto out of a petrol 4.5 ltr im wondering if its possible to fit this box to any other motor {ie td42,tb42,or 3.0 ltr diesel } any help will be appreciated thanks guys

hey bud i just had same problem once i looked into it it seems to be my panhard rod bushes are shot again worth a look for your piece of mind

thanks bud i thought they would just go straight in but i was told there was something different about carrier bearings or a shim somewhere was needed better to be safe then sorry thanks again

hi guys just wondering i have some 4.3 ratio gq centres but im wanting to put them into some gq housings to get extra width is it straight forward or is there anything i have to change thanks guys any help appreciated

hi mate not too sure about fitment but if you are chasing an auto for gu i have 1 to suit a 4.5 ltr gu feel free to call me on 0406071400 hope i can help

remove the "orbital bushes" and just fit standard bushes that is all that is needed.
We have done the R@D on bushes and you do not need anything apart from a standard rubber bush.
My old comp truck used long arms with 18 inch remote res shocks as well as a lot of other bits and it used the whole ...

hi mate if you could please pass on engineers name and number through pm it would be great as i need mine done and im i nsw thanks

they were new and in another rig for 3 weeks then he went long arm kit but every thing is tight in and around the bushes

hi people ive just fitted a pair of rear lower adjustable arms with orbital bushes in my gq lwb and lengthened them by approx8-10 mm from standards.when i took it for a drive it now clunks when im between gears or on and off the power any sugestions on fixing my problem thanks.
it has 5 inch lift ...

you are more prone with lockrites to break cvs so i would fit an air locker so you dont put as much strain on other components and also so you dont have to use too much right foot and wreck tracks for others by ripping them up and boreing holes

HEY THERE BUD IT SOUNDS LIKE THE INNER BEARING HAS COLLAPSED JUST BE CAREFUL WHEN YOU PULL IT APART AS THIS BEARING SOMETIMES SEIZES ON THE HUB AND CAN BE TRICKY TO GET OFF CANT MAKE IT THERE TO HELP BUT IF YOU GET STUCK YOU CAN CALL ME AND ILL GIVE YOU SOME HELP OVER THE PHONE
TROY 0406071400

hi everyone i have a winch was working took it off to paint bar and now ive put it back together just clicking in solinoid box.it wont wind in or out
any help be appreciated thanks troy

HI THERE MIGHT COME FOR A LOOK WITH SOME MATES IN BODIED RIGS IF THAT OK MY N UMBER IS 0406071400 IF I CAN GRAB SOME DIRECTIONS INTO PROPERTY THAT BE NICE THANKS TROY