Outer Limits 4x4 Board

i recently sold a 94 model dx, tidy straight, but with 420000k for $7800
unregistered, so with 260000k, if you got it for under $9000 you would be doing well.

wanted a copy of a 75 series wiring diagram for the 2H motor

i have a 87 model 75 series ute which had the 2H diesel motor in it, i have put the 1HZ motor in and need to adapt the wiring to the 1HZ

i would appreciate it, if some one has a copy they can scan and email to me thanks.

has anyone purchased these spanners , i recently bought a set, only to find they are too big to get into tight spaces , where you need ratchet spanners , has anyone else bought these spanners, what do you think, I bought these to attack a 2.4 turbo diesel manifold, got the job done with a modified ...

yes both are manuals, both running the same size tyres, the turbo has had a marks adaptor part time kit fitted, apart from that, i don't know if the diff ratio has been changed.
interested to see what other factory turbo 80s are reeving at.

Buy from a local dealer. my son-in-law bought a mitech 200 from ebay, for $1100-00 had all the bells and whistles, ac dc, plasma, worked like a treat for about 4 weeks. then the hi frequency board went , can't get parts, or any one to fix it, seller not interested, as he already had his money, and ...

does any one know if the gearing is different on the factory turbo diesel 80 series, i have a turbo and non turbo model, both running 33s the turbo model seems to be reeving its ring out, 2100 rpm at 80 k, where the non turbo doesn't have a taco, but doesn't seem to be reeving no where as hard and ...

does any one know if the 2.4lt crank will fit the 2.8 3L motor, as i have been told the block is the same.

had the same problem, i replaced the 8mm dowels with 10mm ones , and drilled two more positions ,(4 dowels) still running 8mm studs, haven't had any more problems.
running air lockers, standard 4.2 diesel ,and 35"simex .

it could be a security problem, does the car have a transponder key, if the computer does not identify the transponder code, it will crank, but will not get spark or fuel.

thanks 3cyl, i didn't even think of repco, i have been hunting around suzuki dealers, with out much luck, managed to pick up two sets of rings from coopers plains, thats all they had for the lj.

I am restoring a 1977 lj50 back to original, 3 cylinder two stroke, I am looking for parts suppliers , Gaskets at the moment , head gasket in particular .
I would appreciate any leads. Thanks Dave.
contact No. 0427785839

have you tried unplugging the wiring at the gear box, cleaning, and reconnecting, i had the same problem, but has now been working well for months. good luck.

i have a 94 4.2 deisel, 80 series povity pack, running 35s, the transfer needs rebuild, so while it is out, i would like to fit crawler gears. i need some feed back, from people who have crawler gears, what brand. where to get best price in brisbane. what ratio ( the verhical is used for genral off ...

Good advise, i will give it a go, Thanks for that.

thinking of replacing the 8mm studs in the rear hubs, with 10 x 35mm high tensile bolts, sick of replacing the studs,
has anyone done this, and if so , how did it go
Thanks.

hi, i am looking for some feed back on replacement clutch for 93 model 4.2 diesel , which brands are best, my current one rattles like shit. thanks.

hi, i used a 6mm packer on the rear wheels, my rims are 15 x 8 with 10.5 x 15 simex centipedes , works fine, bought the packers from auto barn .