Outer Limits 4x4 Board

hi all i have a hj47 with a 60 series bottom mount power steering pump and a fj40 power steering box, the problem i have is that the pump is pumping good, but the box isn't relieving, at idle it is sitting at 1200 psi at the box at all times going to 1800 psi at 2000rpm, it isn't dropping to a ...

hi i am wondering if anyone can recommend a good power steering rebuilder, any where from clermont to mackay, its for a hj60 pump

thanks Shane Mulcahy

i have spoke to them and as it sat awhile before being installed and run they are not warranting anything, and i was wondering if there is a releif valve in the pump or box that could have caused the problem, and no the pipe runs straight from resivour to pump and back directly, i am going to put a ...

well i got the pump and box rebuilt myself by a well known power steering shop

here are the pictures of my setup, pls tell me what could be wrong

thanks Shane Mulcahy

would someone be able to post some pictures of there setup with a standard 40 series power steering box and 60 series pump, only asking because pictures in the bible are all gone and i cant check what i have done wrong

thanks
Shane Mulcahy

hi thanks for the replys and as far as i know the pulley was the same as standard, and also the hoses should have been the right way into the box cause it was working a treat apart from getting hot

thanks Shane Mulcahy

Hi everyone

i put a powersteering box out of a 40 series landcruiser and powered that with a hj60 series bottom mount pump, both of which were reconditioned, i found that the resivour was getting to hot to touch when the ute was only idling, and it never seemed to have a centre when driving, then ...

Hi my glow plug controler on my hj47 2H engine has died and i put a manual control button in which in turn has burnt out my glow plugs, wat have others done to overcome this problem, can i fit higher rated glow plugs as these were 6 volt ones

thanks Shane Mulcahy

hi i was wondering if i could lift the cab on my hj47 ute so that my steering shalft fits as i am putting the genuine powersteering in and it is hard to source a genuine power steering model shaft that is around 25mm shorter than the standard one, i was thinking if i lifted it by about 30 mm it ...

yeah you can't be picky cause they are always gunna end up bent i have tryed plenty times with mine and have just given up as it moves everytime i clip it down

from what i understand you go to your main battery that all your accessories already run off so that you still have your start battery if you stall it

So no one that has this stuff has sayd how it goes if it gets wet a few times, i am interested as i am looking to do a ground up rebuild on my hj47 and was looking to paint the floor and inside of doors with a second skin spectrum sludge and then placing dynamat over the top, is this a waste of ...

Thanks Skootin not a bad bar, and doesn't seem like anyone else has any haha please people so i can decide on one for mine that offers protection from kangaroos, emu's and the odd cow but still has a decent aproach angle

thanks Shane Mulcahy

i have a 2H engine with 31 inch tyres and i rev to 2500 with the 5 speed and can easily get 125 out of it it is reving but not flat out and i have 3.8 ratios

hi i am looking to make or buy a new bullbar for my hj47 as i am sick of the current bar just plowing the mud and causing me to get stuck, can you please post pictures of what yours is and also can you fit a hj75 bullbar easily

thanks Shane Mulcahy

yeah all you can do is sicaflex it up as the windscreen seal doesn't fill in those holes on both sides

yeah i was thinking about double stacking it and just using a longer aircon belt to fit both the aircon and the endless air

thanks Shane Mulcahy

hi i am looking at getting a endless air for my ute i have 60series bottom mount power steering pump and i am looking to put aircon so i dont wanna use that spot, i haven't been able to find any brackets so i am just wondering what others have done, i have tryed to search

thanks Shane Mulcahy

hi here is a link http://cgi.ebay.com.au/CUSTOM-FRONT-FLARES-LANDCRUISER-FJ45-/190518905238?pt=AU_Car_Parts_Accessories&hash=item2c5bcfc996" onclick="window.open(this.href);return false; to some flares for the hj47 i am interested to see if anyone else has these or no where to get them cause the ...

hi any 5speed gearbox that mounts behind a 2h will fit into a hj47 so any from a 60series or 75series 1980-1990

Hey this has also happened to me and it was that the booster diaphram was perished and to find out you can either get someone to rev the car and you listen to hear for a leak or easier i found was to either blow into the vaccum line from the alternator and you should here a leak

thanks Shane Mulcahy

so you both agree that it isn't worth it so if i just rebuild my front calipers and put new slotted rotors it will help did you upgrade the rear brake system to the handbrake adjusting hzj75

hey just another question for yous (hope you dont think i am waiting to be hand fed) i have searched and can't find what size the surf master and booster is as if it isn't any different to my hj47 one i will keep it as i have a new master and a rebuilt booster

thanks Shane Mulcahy

hi i was wondering if anyone has changed there hj47 rear diff housing to the later model disk brake hzj75, what is involved and is it worth it

thanks Shane Mulcahy

so just to let you all know i have worked out to use 91 surf caliperswith the 42mm pistons as they fit to the 20mm thick rotor as the 80 series 45mm pistons are made to fit a 25mm rotor, these would work but wouldn't be able to use the whole brake pad, i am going to buy the master and booster from a ...

yep thats what i thought and will i just get surf pads but what compound is good

hey when i buy the 60 series rotors should i get the slotted and drilled or just the slotted

i havent brought any yet so i will get the second one so i can where the full pad, what model surf are they from

thanks Shane Mulcahy

hi i was looking at running these calipers on my hj47 but now you have me wondering about rotors as i was gunna upgrade to 60 series rotors and 80 series calipers but i dont think these would work due to different thicknesses, if you can help it would be much appreciated