Outer Limits 4x4 Board

i have front and rear maxidrive diffs for sale. they are a very good option.

pete

flares are off a 2door but rears have been cut for 4 door. 200 bucks
i have an lt 77 box with new output shaft and bearings. reverse is noisy. only done 1000 km then removed for auto. 350 bucks

hi guys, i am wrecking my 84 rangie. lots of good bits. see misc. stuff for sale section.

peter

If my rangie doesn't sell, i'll have a vitese 4.5 stroker motor for sale. And lots of other goodies as well. Motor has heaps of power & is very reliable. See for sale section.

thanks for all your replies. prob found turned out to be the wiper arm. tried it first, didn't work, pulled out switches to check, nothing, tried wiper again,.......worked. all good.

thanks, pete.

Thanks guys, looked at the wiper. no luck It doesn't work with the key eitther. Will check out relay next.

thanks pete

hi there,
the window on my mates 4runner stopped working! I have checked fuses but all good. Is there a relay that opperates window i could check? I havn't checked for power to the motor yet. Just trying to rule out the simple (cheap) fixes first. Any ideas?

thanks, pete.

thanks for that.

pete

Hi there, I'm doing a head on a td42 and was wondering if anyone knows what the h/bolt torque should be??

thanks, pete.

Thanks for the info. All stuff I didn't know as i've never owned a nissan or a diesel! Been driving a rangie.

peter

HI there. Will the head, injector pump & turbo from an 02 td42t bolt onto a 91 td42? the 91 motor is fresh and the 02 motor is seized. If they are compatable, will any other parts off 02 motor be needed- front cover, water pump etc?
thanks, Peter.

I have seen sills replaced completly with RHS.....nice and strong & doubles as a slider! He said it wasn't too hard to do.

Thread is imperial. I have access to a tap but cant lend it out as it belongs to work!! I have made up a set for my RR and they are much better. I could make some rods for you if you like. Same material as MD ones but with 10mm wall instead of 8mm. $100 each plus postage...

peter

btt

Hi , I'm wrecking an 86 rangie....in bris.

peter 0417 070 373

see classifides sect- misc.items

A mate of mine had a 6.2 chev in his 75 ser toy. Standard 2h radiator was only just up to task. He had to mount a/c condensor under tray. I cant remember size of rad to compare to rover unit.

pete

To get more length out of rear brake hose i rotated tee 90deg so inlet faced upwards. Heaps of length now. Hope this helps.

pete

I would like to say it was a good run but as I didn't even get to the second cp I can't comment.

thanks to everyone who helped fix my track rod & thanks Wes & Pete for waiting for me to fix my cv.

Hope all had a good night.

pete

sweeeeeeeeeet!





I want some for my birthday.

A mate of mine had same problem in his 75 cruiser after he had the g/box rebuilt. Sent it back , it was stripped down, checked, rebuilt. After about 100km same problem. Took it back, mechanic pulled it apart again! Found nuthin, put it back together. Problem came back in 2 days. Finally found out ...

According to my Haynes manual the track is 1490mm or 58.5". That would be ctr to ctr of tyres.

Pete.

Just finished watching the video. Almost as much fun as driving it!!!!!
Chris, I think Mandy was trying to run you over but you kept moving.

Stand still next time!

Great vid troy.

A great day of driving & watching! Coits creek realy does hurt without bar work. Its all good but.

thanks to Pete for the use of his property.

maxi can be engaged on the move. same as air locker.

LT 230.....1.192 high 3.32 low BW .........1.206 high 3.244 low plus the other high range ratios for the LT... 1-1 1.4-1 1.6-1 dont forget to get tailshafts with LT as they are different lengths. front is shorter so depending on lift of rr you may need dc tail shaft. pete

Just go & buy an older front housing. It wont cost you 1600 bucks!!! Then you can use the 10 spline outer axles as your fuse. 5 min to fix & cheaper than a cv.

Thanks guys. I have all the parts for it. Just gotta find them all! I pulled it out of the car about 2 yrs ago with a 5 speed to put auto in. Was going to rebuild it and put it straight back onto the auto. Didn't get around to it. Like most other jobs! Should be happining soon. pete.

A mate of mine used to paint his speedway cars with a brush. For a nice flat finish he would sit the tin of paint in hot water to thin it out and there would be no brush marks!

Just wondering if an early lt 230r transfer will bolt straight onto zf auto in place of B/W t/fer. I suspect it will but would like to be sure before ripping it all apart & finding out i was wrong.

thanks. pete