Outer Limits 4x4 Board

A parts dealer or somewhere like this:
http://cgi.ebay.com.au/Nissan-Patrol-Hu ... ccessories" onclick="window.open(this.href);return false;

Does anyone know what kind of intake temps they are getting after fitting a intercooler? Be it w2a (frozen boost, laminova, etc) or a2a (top and front mount).

Something like this?



http://nissan4u.com/parts/patrol_gr/er_ ... tration_2/" onclick="window.open(this.href);return false;

Mines a 4.6

Maybe you should have a look over here:
http://www.superiorengineering.com.au/p ... 101a386afb

The only downside to a straight gas set up IMO is range. With duel fuel, I can carry jerries of petrol to keep topped up when on a day trip or weekend away far from a servo. Can't do that with gas. That is the only reason I am sticking with dual fuel. All my previous cars have been straight gas (wh...

Any tyres really

Mates have done it on crappy near bald ATs and some HTs

Hey guys ive got a 91 GQ with a 2" suspension lift and 33" maxxis bighorns. Should i be going a 1" or 2" body lift and get front and rear arb lockers or should i go the 5" tough dog suspension lift. Is it a big job for a body lift like what do u have to change on the body o...

macneil wrote:ROFL this thread makes me laugh............ soooo much

X2

I actually think he might need at least a 4" body lift though....

I am looking for one of these also. The only thing about the Nordskog is its in deg F....

Both times i turned the fuel up it made a significant different. Boost comes on a lot quicker, and turbo response is a lot better (the little thing screams its head off now :P ) It also gave it more power down low and a lot better performance through the revs. Its a lot better than in its stock form...

No no, you need to put the new 50mm block on top of the old rubber mounts! Or else you will be finding cracks in your floor.

I did mine by just turning it up a little bit at a time, about an 1/8th until i was happy with it. Took it for a run after each tune to check the EGT's and see if it was blowing black smoke. Originally i probably turn it up about a 1/4 of a turn, and then after i fitted the intercooler i turned it u...

I heard people get them from truck spares places. You could go ebay if you wanted silicone ones.

adriand82 wrote:Hi guys. Curious as to what PSI it takes to open the relief valve that everyone blocks off in the front of the inlet plenum on the 2.8 turbo??

Not sure, i just blocked mine off.

If you want to know, go get a spring and measure the force to open it.

uzdnabuzd wrote: 18ftlp per square inch??????

Isnt that 5.4774 psi

You can put one on but it will be pretty much useless, unless you want your rig to be Fooley SIK!!!

Better off spending your money on other mods

geek wrote:I was just interested if there would any performance gain at all.

Yes, you will get a performance gain. The most comes from a bigger dump pipe. But if you get a whole system you will hopefully see some improved low down torque and power.

Boggn wrote:I got mine Genuine From Nissan for $80......i also just got one for a mate too, both GQ's.......keeping in mind i have a missus that works in the car industry so that may be cheaper than what most pay for it.

Just PM nizzbits, thats what he was selling his for.

You sure can.

PM Nizzbits on http://www.patrol4x4.com/forum/

Also this may be of interest to you:
http://www.patrol4x4.com/forum/showpost ... stcount=12

Nice work mate, looks pretty good so far.

Cant wait to see some dyno sheets and a few vids of it in action

Kingston_99 wrote: haha true, where about are you?

Good ol' Weipa

i wanna do a body lift on my hilux, posible max 2 inch cab lift. the only thing im confused is how do i go about doin the job legal. do i have to put the blocks in and then get an engineer to look at it and then go to DOT? or can i jus go straigth to the DOT? Just put them in and dont worry about i...

I just had something similar to this, could be what yours is or not.

But the rubber bushes in the radius arm where it connects to the chassis was worn and therefore the it was slapping around when the radius arm moved.

Anyway, good luck

Yeah nice work mate. Do you have a body lift or how far does the cooler sit through the bonnet?

iamgq wrote:Try WRX Scoop

Where did you get yours from?

Not sure about the 3", but i know you can get a 2 3/4" system (dump to tail) from Baeudesert for about 900 (no muffler) plus freight