Outer Limits 4x4 Board

thanx heaps bud :-)

Can you use front and rear vit ring and pinion? or is it just the 5.12:1 front?

Thanks athol good to hear from an engineer, evan if its bad news for me :cry: well gotta tell you the truth guys its not lookin good, :cry: adding up all the pro's and con's and gotta tell ya the con's are really adding up real fast :cry: so as all smart people do, i'm thinkin of cutting my losses ...

your more than welcome to come check it out just pm me and i'll send you my address but at the moment it's not much to look at, just a LWB chassis and a toyota cresida that i'm currently driving and shell coming soon,

yeah gonna book in some time after i put down on paper exactly what the plan is and then see how much i need to change it, before i decide 100% if i'm gonna go ahead with the plan, because as much as i love this engine and how awsome it should be with gq diff's running on coil's, this sierra will be ...

yeah been thinkin that, i'm trying to get an old block and gearbox for a dummy to use for placement and to use to exactly measure it up,

the turbo might come later :twisted: :twisted: :twisted: lol have you stopped and asked why? =) haha check out the suzuki section - theres a thread on V6 conversion with a ton of info starting to build up. yes i have and its coz because i want to :twisted: and its a far better engine than the V6 and ...

Hi All I'm Just about to start a new Project, - LWB Sierra - GQ diffs (coil sprung) - 7mge engine -Displacement: 2954 cc (180.2 cu in) Weight: 119.5 kg Output was 190-204 hp (142-152 kW) at 6000 rpm 185-196 ft·lbf (250-265 Nm) at 4800 rpm - 4-speed A340E Auto Have no idea what the best choice of ...

thanks bud but its for the G16B not A (efi not carb) i know that most things just bolt back the same way (especially using the BenT kit) but just wanted to find out if there's anything that i'll need (eg. a small bit of pvc pipe to adapt the carby if i want to use the 1.3 air box not the top mount ...

k guys i need to re calibrate my speedo in my 80, how do i go about it, who should i talk to, are there kits available? if anyone hav info or links its would be helpful! cheers ty.... :D There's a place in Carrington near newcastle called Namiss Speedo service there really good i've used them a few ...

hi guys there's heaps of stuff on G16B but not G16A, what i would like to know is what supply's i'll need to do the swap eg. hoses, fuel line, fuel pump. or is there a "How to" on here somewhere or does anyone know where to find one the reason i'm asking is i've only got 1 car and need to do the ...

HRZOOK wrote:Yeah the daikin safari clutch is the go

25% more clamp force if ya believe the literature

I got one they must be good

where do you get one of the daikin safari clutch's from ?

I'm not sure, i couldn't find it so i added it

Note the Suzuki 4 Wheel Drive Club of NSW Inc has well over 1600 people do this survey,

Come on people help our cause, If you want to keep your lifted or lowered, modified vehicle DO THE SURVEY

Vehicle Survey As previously advised the Association is in discussion with the RTA over vehicle modifications covered under VSI50 In any discussion it is important to have good information to support a case and 4WDNSW&ACT is looking to build a database of information around vehicle modifications ...

Save a bit more and get an auto turbo diesel Prado. I don't think you have many options that meet his criteria for $6 grand. At 65 he doesn't have time to save (my dads line not mine). The L/C 60 would not be comfortable enough for them, add to that list any large, leaf sprung vehicle, and any any ...

Hi All Dad (65yrs old) is finally looking at getting a 4wd after all his life wanting one :armsup: :P :) the question is what type will best suit his needs ? ? ? ? ? he wants one that has & can - Under $6000 or there abouts - tow his caravan (not much maybe twice a year) - Auto, Has to be auto for ...

i had one in the front and rear of my 60 series cruza and all i got to say is AWSOME, had them installed by my mechanic (Wes from Agro Automotive in East Maitland/Metford) Awsome Job, they worked as they should, let go around corners (no chirping or anything) steering was slightly stiffer but i just ...

awsome it sounds like its gonna be a hell of a lot better than my very tired smoky rattley 1.3 with a cherade carby that sucked ass on slopes,

was gonna go efi 1.6 but havent got the time,

i went the 1.6 carb due to it being quickest, cheapest and easiest fix for now,

thanks again

Thanks heaps guys i'm getting a complete 1.6 vit carby motor (carby, starter, alt etc.) but just wanted to clear up the install thing mainly so i didn't want to spend money if i didn't need to, any recomendation's on adding a few "herbs"? i'm mainly after more torque over speed thanks again guys

hi all i'm about to convert my 1.3 sierra to a 1.6 vit carby, i've found some conflicting info on the net that i need clearing up, is there any difference between the mounting of a 16 valve compaired to the 8 valve ? ? some say if you use the 8v you don't need and adapter plate for the gear box and ...

so guys any idea's where i can get some vitara diff gears cheap?

as my bro is a mechanic so gearing install and set up is gonna be a "FREEBIE"

hi all

i was wondering if anyone has put a vitara V6 into a sierra before?
if so is it hard? what gear box did you run? what mods are/were needed?
and if possible is there a "how to" out there some where?

carby 1.6 dont go much better than a 1.3!!!!!! chuck injection on it or find a 1.6 with injection already.. whole exhaust off a vit will fit except u will need to cut it down at the end of the muffler and get new pipework from there... so how much better is the injection over carby???? as i'm about ...

hi all i have 31" on my '90 sierra w/t, 1.3 diff's and 1.3 tranny, what percentage of reduction in high range do i need to fix my speedo and get my gearing back to stock'ish region??? i can find info on what % difference (eg. 4.9:1 = 115% in low and 16% in high and/or 8:1 = 250% low and 24% high ...

he steve

thanks heaps but whats the cheapest way to get these 4.9 or 6.5 ????

hi all i know i'm not the only one who is having trouble with stock 1.3ltr w/t gearing, so with running 31" tyres, whats the best / cheapest / most effective gearing combo eg. 1ltr transfer, rock lobster etc. please help with how you fixed and rough cost, i would like to ideally be able to crawl in ...

i had lokka's in the front and rear of my 60 series, and i have one thing to say .................. FREAKIN AWSOME ! ! ! ! they worked really well highly recomend to anyone and everyone, BUT BUT BUT not for a SWB suzuki sierra ! ! ! ! i twin locked my last one with lockrites, and terrible absolutly ...

hi there

my brother has a '93 v6 pajero auto, with some major lack of power,

i think the main problems are
- very very extreamly gutless
- using HEAPS of fuel

any ideas ? ? ?

Could it be a dodgy injector ? ? ?
he's checked over nearly everything

thanks guys

thats awsome thanks guys :-) now where is the best place to get a 1600 efi engine from ??