Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Search found 33 matches

by Tonka tuff 4x4
Tue Apr 05, 2011 8:50 am
Forum: Cruiser / Prado
Topic: Carbi tuning
Replies: 14
Views: 745

Re: Carbi tuning

Mate i have the 3y 2.0 running extractors and 2 1/4 sports system in my 4runner also running a 32/36 weber carb. i just got one from the wreckers of a early model cortina (4cy te-tf) and got it rebuild from sprints carby and tune (SA) stock jets and bought a redline adaptor plate everything bolted ...
by Tonka tuff 4x4
Thu Mar 31, 2011 7:19 pm
Forum: Cruiser / Prado
Topic: 80 series full time to part time
Replies: 46
Views: 5270

Re: 80 series full time to part time

80's_delirious wrote:How do you know it is only running on the front diff?
cos it felt funny one day when my brother was driving it and we dropped the clutch and only front wheels where spinning when in low/high range,
by Tonka tuff 4x4
Thu Mar 31, 2011 4:03 pm
Forum: Cruiser / Prado
Topic: 80 series full time to part time
Replies: 46
Views: 5270

Re: 80 series full time to part time

cheers for the response all . i have been researching all day and pritty much comes to conclusion i might aswell leave it fulltime 4wd. i suppose it will be a whole new driving experience then driving my hilux 4runner. but at the moment it is only running on the front diff and won't go into 4wd ...
by Tonka tuff 4x4
Thu Mar 31, 2011 10:50 am
Forum: Cruiser / Prado
Topic: 3y head onto 4y???
Replies: 3
Views: 258

Re: 3y head onto 4y???

stick with the 4y head as they have bigger valves and better flow. if from memory you can do it but the head gaskets are different,.

i wouldn't do it cos you are going backwards with valve sizing and flow.
by Tonka tuff 4x4
Thu Mar 31, 2011 10:03 am
Forum: Cruiser / Prado
Topic: 80 series full time to part time
Replies: 46
Views: 5270

80 series full time to part time

i am just about to but a 80 series 91 gxl fulltime 4wd. what i would like help on is it easy as to convert to part time.? is it simple as just buying a set of freewheeling hubs and bolting them on. sorry if this question has been asked already. cheers for any reply or help in the right direction ...
by Tonka tuff 4x4
Fri Sep 10, 2010 9:13 am
Forum: Cruiser / Prado
Topic: G52 gearbox rebuild
Replies: 0
Views: 106

G52 gearbox rebuild

Has anyone ever attempted to rebuild there G52 gearbox?? as in seals , sinchrone change.
it sit's behind a 3y for runner

if so was it realitvely easy or is it a professional job.

any help much appreciated.
cheers trav
by Tonka tuff 4x4
Tue Aug 17, 2010 2:43 pm
Forum: Cruiser / Prado
Topic: 84 hilux 4runner conversion
Replies: 8
Views: 602

Re: 84 hilux 4runner conversion

Yeah they don't bolt straight up the engine mount's have to modified and the bellhousing changed, and possibly tailshaft shortened, i was just interested if it has been done as i saw it in a 2wd. and thought that's different, but so easy to work on if it tend's to brake down in the country i the ...
by Tonka tuff 4x4
Tue Aug 17, 2010 10:46 am
Forum: Cruiser / Prado
Topic: 84 hilux 4runner conversion
Replies: 8
Views: 602

Re: 84 hilux 4runner conversion

Yeah I had a gander at the mark's website, but not much info,

so noone has done this conversion on here??
by Tonka tuff 4x4
Sun Aug 15, 2010 9:14 pm
Forum: Cruiser / Prado
Topic: 84 hilux 4runner conversion
Replies: 8
Views: 602

84 hilux 4runner conversion

G'day all. i was thinking about taking the 3y 2.0 petrol engine out of the old girl. just so it has a bit more power up steep hills, now i am in the research if a 202/186 holden engine conversion , don't wanna go v6 due to electrics, i found a 2wd hilux RN something that had a 202 converted in it ...
by Tonka tuff 4x4
Tue Mar 16, 2010 4:04 pm
Forum: Cruiser / Prado
Topic: !!!!!!!!!!!!SHOW US UR 4 RUNNER SNORKELS!!!!!!!!!!!!!
Replies: 29
Views: 1696

saves starting a new thread. can anyone advise on what the best size custom snorkel would be for a 2.0 litre 3y petrol engine with a 32/36 weber on it, i was only thinking about 2'' exhaust with a couple of donaldson elbow bends. i wouldn't think that i would need much bigger.. but could be wrong i ...
by Tonka tuff 4x4
Fri Dec 18, 2009 5:15 pm
Forum: Cruiser / Prado
Topic: hilux surf vaccum lines?
Replies: 2
Views: 286

cheers bud. will check it out.
by Tonka tuff 4x4
Wed Dec 16, 2009 10:21 pm
Forum: Cruiser / Prado
Topic: hilux surf vaccum lines?
Replies: 2
Views: 286

hilux surf vaccum lines?

an anyone help me i have a toyota hilux surf turbo diesel 89 LN130, motor just been built but can't work out all of the vaccum lines. i have 3 spare line not sure where they go. when i connect one of them up i loose power and no smoke turbo does not spool up either. when i disconnect it i have power ...
by Tonka tuff 4x4
Tue Dec 01, 2009 9:14 pm
Forum: Cruiser / Prado
Topic: 3Y carby midrange hesitancy
Replies: 5
Views: 403

also sounds like the jets in the carby are blocking up. get the carby rebuilt or put a 32/36 weber on it, more power and better economy. i had the similar issue with my lux it felt like a fuel blockage (jets) but once the rev's where up it went fine. you can do the old trick in the book and check if ...
by Tonka tuff 4x4
Tue Nov 10, 2009 6:50 pm
Forum: Cruiser / Prado
Topic: v6 coversion, engine mount alignment (stuck)
Replies: 5
Views: 493

the conversion came with the left hand side from marks adaptors, we have already cut the original mount away from the left hand side, we decided to purchase a right hand side to see how it goes, the gearbox is a g52 and the bellhousing is from mark's adaptors, cheers for the reply fella's
by Tonka tuff 4x4
Sat Nov 07, 2009 11:28 am
Forum: Cruiser / Prado
Topic: v6 coversion, engine mount alignment (stuck)
Replies: 5
Views: 493

the 4 runner is LFS front, but it may have been diesel, our dual cab is petrol, yeah i looked at marks adaptors, so i guess we will have to get the right hand bracket from marks,
cheers for the reply buddy
by Tonka tuff 4x4
Fri Nov 06, 2009 4:34 pm
Forum: Cruiser / Prado
Topic: v6 coversion, engine mount alignment (stuck)
Replies: 5
Views: 493

v6 coversion, engine mount alignment (stuck)

my mate and i are putty a v6 in his 85 hilux dual cab, we bought the kit second hand which it came out of a hilux 4runner, now the right hand engine mount is out by 60 mm, we have the left one which is a marks adaptors one, not welded on yet. will we need to customise the right one? or should it ...
by Tonka tuff 4x4
Mon Oct 19, 2009 3:49 pm
Forum: General Tech
Topic: body conversion
Replies: 9
Views: 563

gq body you reckon,
thanks for the suggestion still doing a bit of research
by Tonka tuff 4x4
Sat Oct 17, 2009 6:44 pm
Forum: General Tech
Topic: body conversion
Replies: 9
Views: 563

yep. there is always time forlearning :P
by Tonka tuff 4x4
Fri Oct 16, 2009 6:21 pm
Forum: General Tech
Topic: body conversion
Replies: 9
Views: 563

yeah i was thinkin that,
but text screws, grinder and a welder anything can be done and a couple of cartons
by Tonka tuff 4x4
Fri Oct 16, 2009 3:58 pm
Forum: General Tech
Topic: body conversion
Replies: 9
Views: 563

body conversion

ok, i know this is proberly a huge project and a silly quetion, i love my xc fords and my 4x4, (have both) would the body of a 79 xc ford fit onto the 84-88 hilux chassis, i am not the best in modifing stuff as yet,has anyone done this or seen this done, i knolw the xy came out 4wd, any help or ...
by Tonka tuff 4x4
Mon Oct 12, 2009 8:39 pm
Forum: Cruiser / Prado
Topic: engine conversion
Replies: 0
Views: 239

engine conversion

i have a worked clevo sitting in my ford and was just wonder has anyone put a 302 cleveland in a toyota hilux 86 model??
or even a 250 crossflow with carby? if so was it a pain in the ass with mods or pritty much drop in and a way we go. any help would be much appreciated cheers Trav :twisted:
by Tonka tuff 4x4
Mon Oct 12, 2009 8:05 pm
Forum: Cruiser / Prado
Topic: 18R Supercharged 80 model lux 4x4
Replies: 7
Views: 619

it is a sc14 of a 1ggze soarer, this supercharger is good for all small 4 cylinder engines 2litre up to 2.6 litre +, bought it from a jap import place in (SA). with custom made pulleys and bracket, the reason why i went for this setup is that it is switch activated, so i can have it on when i need ...
by Tonka tuff 4x4
Mon Oct 12, 2009 6:43 pm
Forum: Cruiser / Prado
Topic: 18R Supercharged 80 model lux 4x4
Replies: 7
Views: 619

have you got a supercharger? i just bought a setup to suit 3y hilux but i can't use it due to the power steering set up in the way, (sucks)
by Tonka tuff 4x4
Mon Jul 06, 2009 6:55 pm
Forum: Cruiser / Prado
Topic: super chargers
Replies: 62
Views: 3938

hey (bundy4x4) any luck with the pictures. as i have run into a problem.?
by Tonka tuff 4x4
Fri Jul 03, 2009 5:32 pm
Forum: Cruiser / Prado
Topic: How to find my diff ratio
Replies: 15
Views: 941

the only way you can tell is to pull diff centre out.
by Tonka tuff 4x4
Wed Jul 01, 2009 9:04 pm
Forum: Cruiser / Prado
Topic: super chargers
Replies: 62
Views: 3938

DR Frankenstine that was a excellent reply. it was a good read also. i agree with KUSTOMV840 that is why i went super charger also i can have it switched activated. so when i need it i can engage it with a flick of a switch. just like MAD MAX. what is the best electric fuel pump to use :armsup: when ...
by Tonka tuff 4x4
Tue Jun 30, 2009 7:22 pm
Forum: Cruiser / Prado
Topic: Sluggy 3Y, fix or replace??
Replies: 14
Views: 476

when you get off ya p plates put a weber carby on it cos at 3000rpm you can nail it and the secondies kick in and just raws up the hill and sound so nice and solid aswell. :lol: :D
by Tonka tuff 4x4
Tue Jun 30, 2009 7:12 pm
Forum: Cruiser / Prado
Topic: super chargers
Replies: 62
Views: 3938

(bundy4x4)yes please if ya can send me some pictures would be much appreciated..also (kustomv840) that pipe looks nice. i like shiny chrome things :)
so you reckon the set up won't work properly with a weber?
by Tonka tuff 4x4
Tue Jun 30, 2009 6:02 pm
Forum: Cruiser / Prado
Topic: super chargers
Replies: 62
Views: 3938

yeah i was looking at the CAPA website today.. i am only running 32/36 weber carby... i think that set up (as in the top hat) would be pritty pricie. but cheers..i also just wanna say to everyone thanks for the reply and information. i have researched for 2 weeks and can't find anyone that has put a ...
by Tonka tuff 4x4
Tue Jun 30, 2009 5:57 pm
Forum: Cruiser / Prado
Topic: super chargers
Replies: 62
Views: 3938

2l petrol 3y engine
2lt is a turbo diesel out of a surf