Outer Limits 4x4 Board

I have 94 Vitara g16b The problem is that: After driving for a half an hour - the engine is hot. I switch off the engine - for a while - like ten minutes(went to buy some groceries) When I try to switch on - the Idle is falling - I have to use the gas pedal My assumption : ISC or IAC - Idle speed ...

Thank you for your responses My problem is: After an half of our of driving - stop the motor for few minutes and than start again (The engine is still hot) In that cases I have a bad idle - I need to backup this with the gas pedal for few minutes. I have cleaned the throtle body I have replaced the ...

I have haynes and chilton's book
I see the map sensor - but I can't find on my vitara.
Accordng to the book it is on the firewall
I would appriciate if someone who knows will add a pic to help me.
I have a bad idle - everyone tell me to clean the map sensor
Yossi
thanks in advance
[/img]

I think you are right because I saw some old silicone on this plug

I looked it yesterday - and I managed to pull out the black rubber over there
my question is:
could I just use some silicone to fill out this hole ????

I looked it yesterday - and I managed to pull out the black rubber over there
my question is:
could I just use some silicone to fill out this hole ????

I found a leak/sweat from the gearbox there is a pointing arrow in the picture - in red I think it is a gear brether what can I do to prevent it ??? http://www.geocities.com/yossivarman/rebldtrny.jpg and I pic that I took of the place you can see the reverse unit - with wires http://www.geocities ...

I having problem with idle
and the check engine lamp is working from time to time
where is the plug to connect to scanner??
Is it an OBD plug???
I only know where is the plug that I have to insert a lamp to know what is the problem ?? with the flashings

Hi and thank you for the quick response
daryl - you didnt noticed that I live way far from you

Which shocks you recommend to do this modification?? (ome,rancho etc..)

Is there a posibilty to buy only the brackets???

I live in Israel and here the 4x4 workshops are not familier with this modification From what I've understood Your workshops take a regular shock (like rancho) and weld a bracket for the coil spring on it ??? what are the dimensions? location of the bracket from the lower end?? I have another ...

I am intrested in importing two

from what I've checked lately to my 98 coily samurai
you will need 1530 for the one with couplers
or 1510 without couplers
you can see it here ---פה
http://www.jeeptrip.com/page.aspx?div=F ... 154#480896

Do you have any pic of this area???

Thanks Alot

you can tell me to "search"
but which rancho model will suit??

I forgot to tell I am from Israel
These kind of sierras is very rare here

How much those trialwin cost??
I want to import it from japan???
Does it worth it cost??
Does it have Website??

Does trailwin shock have the spring bracket???
Is it japanese???

I want to raise my coily sierra without bodylift -
I know that there is no suitable front raised shock absorbers for the coily
Does the only way is to to weld the coilover spring bracket to the new raised shock
p.s. sorry for my english

Which Lockright model is suitable ????
1530 or 1510???

Hi
What is the difference between 4->1 and 4->2->1???
and which hedder is suitable for our application???

Aisin/denso/bosch??????

I there a minimum grade to use - SJ/SH/SL
or any grade would do the work??

ahhhhhhhhhhh

ahhhhhhhhhhh

I have already looked in the manual
and I know that it depends on climate (I live in hot climate)
In the service book - it is written - 10w-40,15w-40,20w-50
and I also know that I have to choose the viscousity according to the dripping condition of my engine

I have a coily
I want to replace my engine oil ,but different people tell me different things
What do you use:brand,viscousity,grade- (sj,sg,sl)
Thanks alot
Yossi

I am having non stable idle
I know this can be many things like map sensor ,step motor
when the samurai is standing it is traveling from 800-1500 rpm

you are very clever
I know what is my mistake - when using this large database like
the internet
please open a google page and type yossivarman
and try to open other google page and type droopypete
and then you know the answer
but you didnt unswered to the first question about these parts