Outer Limits 4x4 Board

Hi all, I bought a 1995 Toyota Surf SSX-3.0 LTR Turbo Diesel (1KZ-TE) with an auto. (Import) It runs really well. I have a vibration that shakes the car when at idle in drive. When in neutral its fine. If I raise the revs a bit its gone. The idle is about 750 rpm. What could it be? Any help much ...

FULL TIME FOR ME IT IS

80's_delirious wrote:do a search on LCOOL forum, this comes up fairly regularly

Its a waste of time if your only after fuel economy. I've never read about anyone measuring a change in economy by going parttime.

To be honest not that worried about economy. But wear and tear on front end including tyres!!

I have an 80 FT 4WD and was thinking of going P/T. Been told I can save fuel, wear on the tyres and front diff etc. (Mines an auto too)

So after reading this thread, its a waste of time or not fellas??

Where are the other threads on this subject? Have searched to no avail!!

hey guys my 80 series is making a clunking noise when driving straight and turning only when I put it into 4wd. I don't think it is engaging fully and is slipping any one had this problem before. Mate, just a question, did you put the P/T kit in or was it standard? If you did get it put in what ...

80 Series [/size] Gearbox and Transfer Oils http://www.outerlimits4x4.com/ftopic123" onclick="window.open(this.href);return false; ... light=vmxm http://www.outerlimits4x4.com/ftopic130" onclick="window.open(this.href);return false; ... light=vmxm http://www.outerlimits4x4.com/ftopic127" onclick ...

I found a new front diff for my 80 series. Can anyone give me some idea how long it would take, how much and what else should I do when doing it?
Is there anyone in the northern beaches area who wants some cash to do it for me (I can assist)??

80's_delirious wrote:if its about the same year model its good odds, also lexus stuff of the same vintage is another source. or ebay for reproduction switches

Cheers mate. Even Cressida too!

Hi all, my drivers door Master window switch burnt out. I heard on the grapevine Camry SVD10 model can fit. Is this true and what other models would fit?

OR do you have one for sale?
URGENT request!!

Master switch was the problem. Burnt badly inside causing fuse to blow. Now to find a master switch on THE CHEAP!!!! Yeah right..

Thanks lads I found it. 30 amp big square fuse under right leg.................. Also master switch is stuffed :(

Hi all, can you tell me where the fuse is for electric windows and central locking on a FJ80
GXL 1992? 80 Series. Checked fuse box drivers side under right leg and left front under bonnet!
Cant find any of the two???? HELP

dogbreath_48 wrote:

giffo wrote:Will 100 Series rear diff fit my 80 Series? I found a 80 Series diff for front (hopefully)

No, axle spline count is different. I don't think they came with a 4.1 ratio either but i could be wrong.

Thanks for that

Will 100 Series rear diff fit my 80 Series? I found a 80 Series diff for front (hopefully)

I found another diff (front) 4:1.1 ratio for 80 Series. High pinion. What about splines? They all the same. My rig is very standard.

outbackarmour wrote:part time or full time wont matter, same diff centers. They might be different ratios but that wont matter all that much if you're going lower and have larger tyres.

I have standard height and usual Sunraysia 15" wheel and tyres. So should I check ratio?

80 series has high pinion so steering arm clears underneath So does late HZJ75... As far as i'm aware they'll fit. They'll be 4.1:1 ratio, not sure what ratio your 80 would currently have. I'd suggest it's 4.1:1 too. I know mine is a LSD. Where can I find the ratio? So do you reckon I would be safe ...

WILL ANY 80 SERIES DIFF FIT MY RIG? I MEAN - DOES IT MATTER WHAT ENGINE IS IN THE RIG? I HAVE A FULL TIME 4WD (2/92) , SO IF ITS A PART TIME 4WD, WILL IT MATTER?

VERY CONFUSED GENTLEMEN

dogbreath_48 wrote:

Shieldsy wrote:80 series has high pinion so steering arm clears underneath

So does late HZJ75...

As far as i'm aware they'll fit. They'll be 4.1:1 ratio, not sure what ratio your 80 would currently have. I'd suggest it's 4.1:1 too.

What model is a HZJ75?

Thanks Shieldsy. High Pinion diff I can get.

I have a chance to replace my diff centers. Will the following fit my 02/1992 80 Series Landcruiser FJ80 Full Time 4WD? Auto 4.0 ltr Petrol.

They are from a 1996, HZJ75, manual transmission, part-time 4WD, Troop Carrier.

Will they fit my 80 series???????

Thanks

Great job fellas. Very handy.

Can E10 be used on the 80 Series 4.0 LTR EFI (3FE) engine??

Well boys, bit the bullet and bought the 3FE auto. Drove it back from Newcastle yesterday in the flooding rain. She drove like a dream through all the rain etc. Sat on 120 km/h no sweat. the rig is original as. 4.0 ltr EFI. I was amazed at its speed and smoothness. No rust. Few small dents here and ...

it will have the old 3f injected motor in it, you should drive one with the newer 1fz motor in it before you buy Yeah I have driven them (1FZ) 4.5 Ltr and the diesels too. Its not such a bad engine though right? I have been looking for a while and my budget was limited (as usual) and I will not be ...

SCANAS wrote:25l to 100ks and a bit underpowered.

Price is right.

Geez thanks mate. That's serious fuel burning there! Is that the worse end of the scale?? Is there anyway of improving economy if I bought it?

Thanks

Giffo

Hi all, I am back in the 4WD scene after some 5 years. I am looking at buying a 1992 80 Series Landcruiser with 4.0 litre engine EFI and auto box. It has 250,000 kms on clock and in mint condition. QUESTION: What are your opinions on this engine/auto model? What should I be looking for? is $5500 too ...

Can I substitute my 1991 4 Runner 2.8 diesel radiator for another type that may be cheaper to buy? (Manual)
Maybe another model or brand car.

What others could I use?

Thanks,
Money is scarce as we all know.
Steve

I have a 2.8 diesel in a 4 Runner (1991)
I have just bought a CT20 turbo (oil cooled with dump pipe) and want to know what I now need to install it?
What manifold and other stuff needed?
Instructions how to do it.

Any one in Sydney Hills district that knows how?

Cheers
Steve

I have had my 2.8DX 1991 4 Runner for a month now. 2 tanks (65 ltrs) 9-10ltrs per 100kms. If I push her hard I use more. Not to bad really compared to my other car VT V6 auto, 14ltrs/100kms. Can someone tell me about this LPG for diesels. How much, who does it in Sydney and what consumtion are we ...