Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Search found 10 matches
- Tue Sep 21, 2010 8:43 pm
- Forum: Cruiser / Prado
- Topic: D4D tapping sound
- Replies: 9
- Views: 446
Re: D4D tapping sound
Sorry i forgot to add that this is only when the engine is cold.
- Tue Sep 21, 2010 8:41 pm
- Forum: Cruiser / Prado
- Topic: D4D tapping sound
- Replies: 9
- Views: 446
D4D tapping sound
Gday again, I have heard from a few people that after 100,000 kms in the new model hilux's hearing a slight tapping noise between 2500 and 3000 rpm is a standard thing, Toyota reckon its a software upgrade to the CPU, however that might just be them wanting more money from me as its out of warranty ...
- Sat Sep 11, 2010 8:02 am
- Forum: Cruiser / Prado
- Topic: Front air locker on an 06 Lux.
- Replies: 9
- Views: 435
Re: Front air locker on an 06 Lux.
Thanks to all for your help, and yes that's correct, will probably leave it the way it is.
Thanks again.
Canyonero.
Thanks again.
Canyonero.
- Fri Sep 10, 2010 3:04 pm
- Forum: Cruiser / Prado
- Topic: Front air locker on an 06 Lux.
- Replies: 9
- Views: 435
Front air locker on an 06 Lux.
So i have front and rear ARB air lockers on my 2006 SR Hilux ute, Since last time i used them, about a week ago, i have noticed that the front locker will only egage if the rear one is already locked. 90% of the time i choose to use the front locker the back is in anyway, however it is just one of ...
- Wed Aug 11, 2010 8:24 am
- Forum: Cruiser / Prado
- Topic: 100 series whistle
- Replies: 7
- Views: 308
Re: 100 series whistle
if the exhaust has been replaced with an aftermarket one. could be worth checking were the pipe bolts to the manifold, there is a nut that you can fit the CO2 emission sensor too, nut could be loose and it would sit right under the cab too making it more evident.
- Wed Jul 07, 2010 4:42 pm
- Forum: Cruiser / Prado
- Topic: Belt slipping after a power upgrade.
- Replies: 8
- Views: 320
Re: Belt slipping after a power upgrade.
the belt was replaced 2 months before the power upgrade and was not heard up until the mod had been done.
- Tue Jul 06, 2010 5:46 pm
- Forum: Cruiser / Prado
- Topic: Belt slipping after a power upgrade.
- Replies: 8
- Views: 320
- Mon Jul 05, 2010 5:02 pm
- Forum: Cruiser / Prado
- Topic: Belt slipping after a power upgrade.
- Replies: 8
- Views: 320
Belt slipping after a power upgrade.
I have a 06' Hilux D4D, have had a chip and 3" exhaust fitted, i carry about 300kg of weight constantly so the power upgrade has been very beneficial. My dilemma is when taking of from a stand still, when the clutch is coming out to engage the gear the belt slips, only for a split second, but still ...
- Mon Apr 19, 2010 5:13 pm
- Forum: Cruiser / Prado
- Topic: 06 Hilux DP Chip and 3" Mandrel Exhaust
- Replies: 0
- Views: 189
06 Hilux DP Chip and 3" Mandrel Exhaust
Looking at getting a DP chip and mandrel exhaust fitted to my Hilux 06 150 series, wondering if anyone has and if there are any faults caused by the assisted power gain, eg, engine over heating? CV's? etc
- Thu Sep 03, 2009 8:07 pm
- Forum: Cruiser / Prado
- Topic: 06' Hilux Sr Recovery Points???
- Replies: 3
- Views: 570
06' Hilux Sr Recovery Points???
I have an attachment for the tow-ball at the rear, however for some strange reason there are no points on the front? Assuming the welded tie-down points are not worth crap. Can you purchase pre-fab points or am i better off getting it engineered?