Outer Limits 4x4 Board

Haha!

Checked under the passanger seat, Nothing but 5 and 10c coins so i'll rule out the vibrator.
Have to check again for said humming bird and a broken engine mount.

Cheers mate,
Deneo.

Hey guys.

Just brought a ln65 hilux 2.4 diesel.
Here's my problem, When i get to higher revs like 2000-3000 there's a large humm coming from the passanger side.
Iv'e checked the exhaust gaskets and they look fine, Does anyone else have any ideas as to what it could be?

Thanks,
Deneo.

iv'e got a stick, But i would also like a cheaper mig aswell.

Hey guys, Quick question for all you welding gurus. Iv'e done abit of welding. I know my way around mig, So i'm looking at buying my first welder for stuff around hoem and fab on my hilux for bars etc. But i have one drawback my Budget is 400-600ish. Can anyone recomend somthing decent in my price ...

Yeah i did the valve clearances a week or 2 again, I'll check them again just incase.
I played around with the mixture screw and it seems to be running abit better. Don't know if i should of touched it or not though.

i just put a new head on it, Had it tested and faced. Where would i get a compression/leakdown test?
Cheers.

When you changed the leads did you also change the lead from the coil to dizzy? Have you checked for vacuum leaks? Check that the intake manifold and carbie nuts are tight. Have you considered rebuilding the carb? Most places will do it for around $150. Yep, Replaced the lead from the coil to the ...

I'm pulling my f'n hair out over this, Sometimes it's hard to start, Other times it starts straight away, and the misfiring sometimes is worse than others.

Carby mate, Forgot to add that.

Hey guys Spent some cash on my Ignition system in the 1990 Mav TB42, Iv'e done Plugs, Leads, Pertronix kit, Flame Thrower Coil, Rotor Button and Dizzy cap and it still has an intermittent misfire on idle and lower revs. The pertronix kit is all wired properly, Black from the pertronix to the coil ...

Hey guys, Put a new cab on my hilux 1986 LN65, The shell i got had the fusebox from the righthand kickpanel cut out, so i re ran that loom, All was fine put everything together until today when i tried to start it and it won't start, The car cranks over but won't fire. The glow light and everything ...

Hey guys,
Just wondering if a 4 Runner Shell around the 86 mark will bolt on to a 86 dual cab hilux chassis, will i need to make any modifications?

Cheers guys.