Outer Limits 4x4 Board

dude, great effort. how'd the certification go?

Guys
I read somewhrere about a list of speedo drives v6 (ie 19 tooth, 20, 21 etc) with part numbers. Can't find it, any ideas???

Yeah your right....lasted 3 weeks of semi full time and then just basically just wouldnt hold pressure. Might not be the bags, but dispite trying to pump up, nothing happens apart from normal slow flashing for anout twice as long as it used to take to pump up, then a much faster flashing (which I ...

Team Did the mod for the bypass on the height control and ran with it up for a few weeks. Think Ive stuffed the bags by doing this. As im about to fit +50mm springs and new torsions I was thinking about removing the bags because they are a) old and now knackered and b) seem to be a bit of a weak ...

Hithere & Welcome.

Lots of views, no answers. If I may, suggest do a bit of ground work first, then when youre stuck, ask....

Cheers
Mark

Dont know about the specifics, but might I suggest, and I dont mean to sound condecending at all), sit back and double check all connections; electrical and mechanical including the lines to the diff), follow the whole run through first; ifg that looks ok, i'd disconnect the air line at the diff and ...

Guys,
Found a set second hand, aparently off 88-89 model (thats the only info provided), are Aisin's model specific or will any p[ajero manual fit (note agaion these are for use on the v44 diff, but if that takes too long to sort I'd like to use on the v23 setup?

Cheers Guys So if I get you right, I fit manual hubs, leave them locked and if I want to use for low 2wd just unlock at that time, however for the rest of the time leave them locked. If I do this, although the hubs are locked and I am in 2H, as the transfer case is not engaging the front diff ...

Guys Want to fit Aisin manuals to HN 3.0 auto Super select to get the benefit of Low 2wd. Ive just read somewhere that if I do this I can't then shift from 2wd to 4wd while on the move (or will break somthing) if the hubs are unlocked (or locked for that matter) . Can anyone offer advice on problems ...

Thanks Glen
Appreciate the advice, still feeling my way round.

Hi there
Anyone tried a 6g75 into a genII (in place of the 6g72)?....can it be done realistically?

Guys,
Any advice on the merits of this would be appreciated (have new EFS torsions fitted)...

http://www.trademe.co.nz/Browse/Listing ... 34692//url

Hi Guys....newbie here... Starting to set up my Jap import NH 6v72, 3.0 auto SWB, 4.875 ratios. Currently have fitted new EFS torsions, and +100kg 40mm lift springs, superwinch manual hubs, factory 3 mode suspension c/w hight adjustment. LSD, 40mm body going in, running 16x8 neg offset 80 series ...