Outer Limits 4x4 Board

forgive my ignorance but how can the timing be out 180 degrees and how can i check

mmm timing maybe but i didnt think that would stop it from starting completly.
I am fairly sure the leads are in the right order as the dizzy cap is numbered

Hey Gents As the title sugests i need some help urgently, as my mate is having his buck show on the weekend and i need my 4x4 goin. Anyway I have an 89 4runner with a 22r in it and have just replaced the head gasket. the problem is it wont start. \ Here is a list of what is happening when i turn the ...

Hey guys not sure if you guys are still hunting for a 3rz but i think i am goin to an auction tommorrow in newcastle. so i will let people know how much they go for.

is there anything i have to look out for like a particular year model or is any year model good?

LOOKS LIKE AN OLD HILUX MIRROR

thanks latitude for the info. I used to have just a 2inch lift with rancho rs5000 and it flexed awesome. so hoping to get similar results

thanks for the link. have read twisty build before. a good story with a sad ending. so i guess next question std 100 series coils in 4runner what height

ok thanks for that guys
will hopefully get a chance to have a look this weekend.

yeah there isnt much room but the problem is that unlike all the other breathers the transfer one dosent seem to have a hex shape base to undo.

thanks twisty a little more than i wanted

how much lift would landcruiser 2inch lifted springs give to a coil 4runner rear

I am currently putting some diff breathers in my 4runner with the g52 gearbox and i think its a chain driven transfer and cannot not see how to get the standard toyota breather off the transfer case any help would be appreciated.

Thanks Mitch

hey mate i mounted to the back of my seat there is a screw already in the back of the seat which i used as it is a solid mout and i just tech screwed the other three works fine for me. as for not seeing it well if they see your sub the will know there is an amp as well

not 100% sure but should be the same there are a couple of fuses related to the fan on the passenger side right up under the dash. if you remove the glove box you will see them easy enough. hope that helps

a friend of mine has some tough dog adjustable panhard rords of a nissan patrol. wondering if the rear will fit in my 90 4runner maybe if i change the bushes?

Hey Guys I had a similar problem in my 4Runner. Two more things to check like thrashlux said check the crown nut and also the crown bearing. Secondly check that you havent bent the flange which you bolt the drive shaft on to. I blew my driveshaft and speared it into the ground and it turned out i ...

If you have striped the head of the bolt use an old screw driver or chisel to hit the edge of the bolt making it turn. You may need to hit the bolt straight on to make a bur.
This is always been the last resort for me as it damages tools and is quite frustrating to do, BUT WORKS.

I have installed a 32\36 weber on my toyota 4runner 22r and and not sure how to hook up the vacuum hoses so the front hubs will still work. I also want to remove all the pollution equipment.

hey i could also use some of them plates saves me getting them made

Thanks for the link mad engineer. sold on the superflex arms.

Well looks i have been well and truely told wrong. That is just what i had been told about leaf springs. I have coils

Thank you Barno.
Sorry but that was kind of the point i just wanted to know what flexs the best yet dosent require major modifications. as in i dont want to do a 5 link or anything like that.

my 2 cents worth if your after 2inchs of lift dont get 2 inch lifted springs get 2inch extended shackles as a flatter leaf pack flexs better. on the the other hand if you intend on carrying heavy loads in the rear then a stiffer sppring pack is neccesary.

What is better the snake racing drop radius arm or the superior engineering superflex arm. or is there another contender.

Well there we have it ..... The TD 80 series Sahara may just be the best Toyota 4wd ever built as far as an offroader goes, with enough fruit to keep all types happy.

lets not get so hasty best 4wd toyota has produced dosen't sound right.
maybe best 4wd produced is better.

so jealous

Sounds like a good idea makes sure you take plenty of happy snaps.

chalk another one up for the td 80 series

ok thank you.

Just wondering i have heard much about the proposed new laws for a while wondering if any one has an update.

also wat qualifications are required to engineer a car. ie mechinal engineer.

hey Nemesis thanks mate thats what i wanted to hear. Well i am a in NSW so what are the laws like in my state. any thing i should know about the regulations also any engineers in the newcastle region. I am not sure how to get in contact with one. ok thanks struth for all that info. well i know for ...