Outer Limits 4x4 Board

boys anyone knows the normal distance from axle to bump stop or the spring lenght (on the car)on a disco1 200tdi? i fit new springs from bearmach and the nose looks a couple of cms higher than the rear and also leaning on one side (drivers side mine - passengers yours),the spring lenght is 31 on ...

DON'T LIKE AIR LOCKERS!!! call me idiot but i need something that can work without any attention

slunnie a 5link is almost impossible due to space,i will stuck with the 3link and see how it goes,the link is at the machinists shop and will post an image as soon as i can,and then start making the crossmember.


daf.

thnx for the replies guys,i contacted ashcroft transmissions to get a price for the factory 4pin diff and at 545 sterlings is not much cheaper than a quaife atb centre diff at 575 sterlings a well proven brand!! but on the other hand you can get a tracktech (detroit)tru-trac diff plus a 4.11 ring ...

$h/t! i've been told so but wanted a second opinion.

thnx shane,i'll keep up with sam's posts i think he is realy helpful and he knows the subject,and thnx all of you who gave me some of your time.
i will try to get some pictures of the arm when i finish it and hopefuly till the parts are ready to get enough infos tou make the thing to work!

daf.

does anyone know if it's possible to fit a p38 4 pin diff into a disco 1 axle case? it's a good upgrade from the standard sick 2 pin diff.

strange rover that's what i have in mind,a standard rover set up is a good point to start from and then adjust to my preference,although i don't know how to find the AS of the stock front suspension because of the lack of the 3rd link and the use of the radius arms to control the axle wrap,but what ...

youre very helpful boys and i will read the thread,again for 4rth time and personaly i think that i'm a bit stupid for this, :lol: but i'm allready making the brackets, the link it will be simillar to the trailing arms, bush on the axle and pin on the crossmember side but with a 4mm thick wall and ...

hi i'm working on a 3 link calculator to figure out a front 3link set up for my disco,i searched the forum and the internet but what i found is,you must know a lot so you can build your suspension according to your needs and that there is not a good or bad set up but a set up for the kind of thing ...

thnx a lot boys for confusing me more than before!! :cool: OK i read the most of the pages but things is as i first thought,confusing and the opinions like options many!!!but gave it a go again on the 3 link calculator and got some numbers according to most that i read is good numbers. so here it is ...

hello you 4x4nuters i'm new here and relativly new to 4x4s so here i go, i was messing around with a 3 link calculator to see if i can figure out a way to fit a 3rd link to my front suspension to get rid of the hockey sticks and balance the front end with the rear ,for the record i own a land rover ...