Outer Limits 4x4 Board

Had a look this arvo turns out my problem was the motor ,I have 2 80's at the moment so I pulled the switch from the other one to test.

Just gave the motor the "fix all" with a hammer and it's working at the moment .
Anyone know if the motors from door to door can be swapped?

excellent

thanks guys I will try and give ti a clean up.

I have a dodgy drivers side pwr window switch like a lot of people out there .
Are these reparable and is there any trick to removing them or do they just clip off.

If they cant be fixed where is the cheapest place to buy one?

thanks for any help

I should have worder it better - you can't import a vehicle from overseas if the model was available in Australia - unless it was built prior to 1989. This rule came in in 2005, so I'm not sure how an 80 series could be imported, thats why I asked.

I don't think the 15 year rule applies anymore ...

Hi guys

I have bought a 90 mod mav for parts (burnt as they come)(crispy)(toast)
What I want to know is.

Has anyone used a burnt donk/gearbox before ,also I want to cut the side of the body out for another car will it be any good.
Or does fire bugger everything.

Any ideas?

CWBYUP wrote:From my understanding ( its not Bible ) the EFI's are tuned differantly between manual and auto.

Something to do with matching the tuning to the torque converter or something.

Not bible but just what i think i can remember from somewhere.

Nick

Bugger so I may need to get a manual Efi computer?

Hi I am doing the same thing the neutral switch is 2 bigger wires on the one plug. Black/yellow & a white I just joined them and away it went.

I don't know about the TPS though let me know how you go .

Mine is a 94 Efi also it seems to be running a bit rich but I don't know if that has to do with ...

j-top paj wrote:how much coin u want to spend?

Max $400 but less is good

Anyone else?

Hi guys l
Like it says I am looking for a new uhf what's good I want one that can receive fire/ambos ect.
Also where"s the cheapest place to get one.

Thanks Scott

CRUSHU wrote:I have a switch on the dash that says hold. I've never used it, but i assume it olds the current gear?
Mine is a series 2 EFI.

Yep thats the same thing my GQ 2 had, I just choped it out of the loom .
So if you need wire colour or whatever let me know.

cheers Scott

Nope, no luck.

The box was leaking on the way home, and I didnt notice for a while, could it have run the resevoir dry enough to make the pump shit itself? I wasnt making any noises before I changed the box over though.

Perhaps I just bled it incorrectly...

Try jacking the front wheels up ...

Who needs a fork me and the wife did it today . So what if the shed roof is now a foot lower than it was

Bugger already bolted the box on & dont have a forklift handy.

Im chasing 4.6 diff gears or centres for my GU 1999 4.5ltr petrol Patrol. Now im lead to belive that it has the bigger rear diff the H260.. I was wondering if anyone can tell me where is the best place to buy and how much.
Cheers

I have one brand new in box aftermarket front 4.6 gears (c&j or ...

Hi guys
I need to put a new donk & gearbox in my 94 GQ (4.2 efi petrol & 5 speed) .
What I need to know is can they go in bolted together?

The transfer case is off the gearbox

Has anyone done this without injury?

thanks Scott

plz stop annoying me and get pics :armsup:

Don't know how.

http://i73.photobucket.com/albums/i238/max10220/P1240003a.jpg

http://i73.photobucket.com/albums/i238/max10220/P1140091.jpg

http://i73.photobucket.com/albums/i238/max10220/IMG_0020.jpg

http://i73.photobucket.com/albums/i238/max10220 ...

cheers Greggo !

ill add that to the list, got a couple of sms messages now, but looks like friday is too late and a working day for most people ! although the trip later in the year is definately looking the goods now :)

so will let you know when i come down next, thanks again !

H
Don't bother ...

crack wrote:i wanna see it! send them to me

Sent you a email hope your not on dialup but

Has anyone seen this thing in the zoom mag issue 109.

Very cool Tasmanian bus with a Hi-lux body on a patrol chassis and 90 % of the work is in house . 4ltr quad cam v8 with supercharger & 37" claws This Guy knows how to build a 4wd.
Just fitted 4.6 gears & air lockers .
I have pics if someone ...

Heres Grungles homepage with the specs on gearbox and diff ratio's from factory for GU series.


http://www.mcs.net.au/~grungle/specifications.html

________________________________________

Thank's old mate
I went to the wreckers today to have a look it does'nt even look like a Patrol diff and ...

Hi guys can someone tell me the gu diff ratios and will a rear GU diff fit a GQ?

GU diff ratios

as follows

3.9
4.1
4.3
4.6

The above are all genuine can get aftermarket 4.88...

And provided the GU diff (entire centre ) is a small diff hs233 yes that will bolt into the rear the of the GQ not ...

Hi guys can someone tell me the gu diff ratios and will a rear GU diff fit a GQ?

i want another go in reverse with 1psi in my tires i recon i will crack a 850
Philby

Well if everybody did that then tye would all get a higher score wouldnt they. :roll:

Defeats the purpose yep your right there Ray!! lots of tricks can be done to lift your rti.. When I saw quite a few of them ...

[quote="bogged"]what happens if you need warranty on them?[/quote

Warranty's on lockright's arn't worth shit I had two in my hi-lux when one died all the Australian company said was "you must of put it in wrong you will have to pay for the parts" and that was that.

Got one in my gq now and love ...

ok all by the 14/9/05 will be the dead line for all the signed letters to be back to myself or peter please if you have them return them by that time and if you need us to pick them up pm me and either peter or myself will be into pick them up but please ask for id before giving them to just anyone ...

The TRVA Southern Executive met with Parks senior Planner Gary Willmott last Wednesday and had a frank and open meeting. They realise that this is a hot potato issue and fully expect users to be pissed off. They expect that their proposed Plan will go to the Planning Board and thus will hear ...

WOW so what do people pay secondhand I have some in a car I am trying to sell so it maybe worth taking them out.

cheers Scott
what ratio are you trying to sell? Are they complete centers? Lockers? LSD?

I am in TAS so postage would be a problem for complete diff's so I guess it would be ...

This is not what you said when you wanted a set :lol:

Sorry $70 an end. it was in the cupholder thread thats why I could never find the ***** thing.


Genuine Nissan ones.
4.6 $990per end..
4.3 $925 per end..


WOW so what do people pay secondhand I have some in a car I am trying to sell so it ...

Any word on the meeting guy's? anyone?