Outer Limits 4x4 Board

Hey.

I am chasing a 4 inch Snorkel and Airbox for my GU Wagon.
I want to retain my Dual battery.
Who is Vic is doing 4 inch Snorkels and Alloy Air boxes that fit in the factory Air cleaner position.
Also it will be replacing a Safari Snorkel, will they go through the current hole, or will I need it ...

killalux wrote:t400, t700 or built nissan box with manual valve body

does manual valve body mean it has to be shifted manually with the floor shifter ??

Got a GU Wagon runing a LS1 Gen III.

Considering swapping the manaul box (that is in need of some love) for a Auto
Tying to keep away from an electronic controlled auto.
what are the options in strong and simple autos

Cheers

Gueey.

My DTS 1HZ 105 series is just under 500 deg C flat out in 3rd up hill !!

Cheers

Grant.

The idel lean and rich screw can be seen bottom left of mixer and the power screw is the large hex nut at the lower front that can not be seen.
This is what i have always belived !!!

Grant.

Hi.

Recently bought a impco 425 for my 350 Chev fitted to a fourbarrel thottle body ( Straight Gas).
I have fitted it up and cant seen to stop it idelling rough and smelling very rich.
I have adjusted the richness screw all the in and out and it seem to make no difference.
It has plenty of power on ...

Maybe in living in the past, but i have a good old fasioned cast iron 350 chev worked for straight gas in my GQ.
she goes like the clappers, great torque, 150 kw on 35s (Dynoed) arsome acceleration.
Easy simple coversion, no electronics, HEI dizzy very reliable.
25-30 litres per 100.

Grant.

M10 x 1.25 pitch, bolts about 25mm long 14mm hex

Grant.

My two GU wagons.

35 Claws

3 inch Coils, -22 mm offset rims

White GU , Ridepro coils

Green GU, Dobbinson coils.

Grant.

Good to know about the transfer vibrating, I have notice it before when I have put my hand on it while driving that you could feel the vibrations, and was wondering if it was normal or not.

Doesn't really vibrate visibly, or rattle around and make noise.

Not sure how bad Gueey's is vibrating, he ...

hi there.

Is it normal for my transfer case gear lever to be vibrating its arse off.
My truck runs smooth and gearbox lever is still and smooth.
why does my transfer lever buzz harder than a girls best friend ???

Grant.

Serviced my 350 this weekend.
5 ltrs covers it.

Had one in the rear of my V8 FJ40 for about 5 years.
It made the odd "bang/ clunk" every now and again , mostly taking off at the lights gently, and it would understeer around corners with the power on, but is never gave me any trouble or reliability issues.
I just had to adjust my driving style to ...

holleys are cheap pieces of junk. They splutter on any angle over 30deg. Go gas or std. They are so much better! Completely miss informed comment!
Holley Offroad Truck Avengers will run perfectly on any angle you are brave enough to drive, I fitted one to my 350 Chev GQ it was brilliant in the bush ...

Coil control voltage will depend upon what supply lead is provided, and what power socket ie, 4 pin or 5 pin.
IE. 5 core cable offering a Neutral connection can uterlize a 240Volt control coil.
IE. a 4 core cable offering no neutral will require a 415 volt control coil.
Standard type 3 phase ...

the Diesel 105 series has the r151
the turbo diesel 100 has the h150

R151 = poo / hilux box
H150 and h151 biggest toyota box the h150 are behind the v8turbo cruiser utes and troopys as well Can the Tuff H150 box be slotted straight into the 105 1HZ 100 series ????
I am prepairing my stratagy for ...

My GQCHEV is fully engineered straight gas, no carbon canister fitted any more!

Grant

Chook350 wrote:Hey i have a 85 swb patrol with a old 327 in it, running straight gas do i need to have the carbon(charchol) canister.

No, carbon canister is purely part of the petrol emission gear.
Straight gas , not needed.

bj on roids wrote:Simple answer... NO... it supports the stays on top of the front doors, and stops the roof flapping around... Plus, you would need to take the back doors off, to let the air through.. Otherwise it would be trying to destroy the roof

I Dont think he'll be shooting at 100 Kph!

Simple!

If the shocks are fully stroked while sitting on flat ground they are too short !!

thanks GUEEY wat brand of turbo did u go with n wat sort of price did ya pay? I fitted a DTS/mtq kit, seems to be very poular on a 1HZ.
i got the whole kit as new, second hand, from a mechanic mate of mine for $700. "bargin".
Got a 3inch zorst fitted up after i got in all runing.
Fitted a EGT VDO ...

Not hard at all.
You usally get fitup instructions with the kit.
Hardest job is getting the oil return fitting into the sump.
I had a shop do that part and i did the rest!

--------------------------------------------------------------------------------
Hi.

i have a GQ Patrol and a 105 Hungy.
I am about to buy a set of bias tyres that i will mainly run on the GQ but it would be nice to use them occasionally on my 105 Tojo.
it there a Adaptor or wheel spacer ...

Hi.

i have a GQ Patrol and a 105 Hungy.
I am about to buy a set of bias tyres that i will mainly run on the GQ but it would be nice to use them occasionally on my 105 Tojo.
it there a Adaptor or wheel spacer available to achive this ???

Grant.

Fantastic info.

Many Thanks

Grant.

Hi.

I am trying to find the fuel screw on my injector pump on my 2001 1HZ 105 series.
I had the pump with the altitude compensator on the top.
I have been given info from members, but they are different pumps to mine.
I cant find the long screw with the nut at the base with the wire lock on it ...

Hi.

Looking for the skinniest tyre and rim option that has the same rolling diameter of my MTZ 285x75/16 to fit under the rear of my 100 series.
Tyring to keep as much clearance as possable untill i can afford a rear wheel carrier.

Cheers

Grant.

255 x 85 /16 on a 6" rim
That what i run on my ...

Hi.

Looking for the skinniest tyre and rim option that has the same rolling diameter of my MTZ 285x75/16 to fit under the rear of my 100 series.
Tyring to keep as much clearance as possable untill i can afford a rear wheel carrier.

Cheers

Grant.

T_Diesel wrote:Where did you mount the gauges? Can you put up a photo?

Gauges are mounted temporary at the momment.
Will fit them into a A pillar pod once it has been tuned up.

Grant.

... the problem i had pre turbo was the divider in the exhaust manifold, i could only read 3 cylinders...

So a bit like this
*gigantic pcture*

Does the probe favour one end to the other? This is how mine is installed - no problems over the last two years but my EGT's do seem low. Problem with ...