Outer Limits 4x4 Board

I ended up giving up in the end and employed an auto-leckie. I can't see what he's done other than rewire from coil to distributor. I tried this and didn't get a result so don't know what he's done. It's working fine though now. I think the PO has done a lot of dodgy wiring. I don't have a stezza ...

stoopid brain

Talk to member scotto. He's done full 80 series conversion on his bj. He loves the results, and will be able to give you a low down on the issues you can expect to encounter. Good luck.

Hi all, I'm posting this for my bro (who I have told tp join!) HE wants to replace his cv and uni joints in his 60. I've had a good look around and cant find any posts showing how to replace the uni joints. Also no vid on youtube. Can anyone help with a link to a previous thread or advice on best ...

Is there any real issue using a 1.6ohm ballast resistor instead of the 1.4ohm standard? they don't make 1.4 anymore.

Not tried roll-starting. With ign on and points open, I am getting 12v to the coil but only 0.7v from the other side of the ballast resistor; which immediately gets so hot it starts to smoke. I will try replacing the ballast resistor today, but I'm now thinking there's a wiring short somewhere in ...

New points, dissy, leads, etc. Thinking it could be the condenser also, replacing that today (fingers crossed)

Well, finally the 45 has had a driveline rebuild. Happy to report new steering, LSD rear, new swivel hubs, etc. Unhappy to report ignition problem If you guys know anything about 2f auto electrics, please see my other post. Cheers.

I've been chasing a problem for a couple of months on the 45. First, it just wouldn't start. Mobile Auto Leckie (MAL) got it started with a different coil and we took it up. They replaced the alternator, coil and she seemed fine, drove for a few days then parked it for a week. Wouldn't start. Got ...

thanks guys. Looks like I'll save for a complete disc front-end after considering the work/cost vs reward argument. Anyone have a 40 disc brake complete diff? Please let me know what you want for it. Thanks. Scotto, let me know when ur up next and if ya up to joining me and 24 of me closest mates ...

is this the same 45 that scotto was telling me about today? I might be able to help out with a disk front end and another center.. ray i think from what scotto was telling me the pinion unwound or came loose or something.. not 100% sure.. Yep, same truck. I'll try and figure out how to post some ...

Hi all, I was up at double island point last weekend when the front drive-shaft fell off! It's only the second trip since buying the 45 a couple of weeks ago. It looks like the teeth on the uni are gone and its very loose (suggesting internal diff is cactus). I'm now tossing up between rebuilding ...