Outer Limits 4x4 Board

I just bought this shorty on the weekend


It won't go into reverser so I took the shifter housing off and if I remove the little linkage from inside then it goes into reverse and works fine. I guess this link stop thing is to stop you going from 5th to reverse, so it'll have to go back in but I can ...

Just wondering what others have done for the charge wire for the backup battery?

Anybody?

Somebody?

Ferris?

I've got a TJM 9500 oz winch but I am unsure on the wiring

It has 1thru 5 on the control box and f1, f2 and a on the winch motor

Can anyone tell me which cable goes to where

Just wondering if anyone has used an after market pitman arm on the pajero?

the pajero has a ball joint in the arm. I want one with the taper eye so as I can put the balljoint on the drag link

I'm using a 93 pajero steering box and was wondering do any other make pitman arms fit?

Im chasing new electrical pins and sockets for my vitara, i have to do some mods and would like to use the same plugs. Does anyone know where you can buy them

Droopy pete if your still on here have you got a drawing for the adapter you made for the toyo driveshaft to handbrake drum?

Gidday Guys

Just wondering if anybody got a copy of this manual as I am building up a 1.6 and would like it

cheers

Gav

hey guys,

im currently fitting a pwr liquid to air intercooler to a td42, atm i stuck for mounting options for the little bosch water pump that comes with it. does anyone know of any brackets or mounting solutions avalible??

cheers

Just got back from a great week on Moreton island. Unfortunately on our second trip up the beach the engine tried to cook itself. We stopped in time and let it cool - took about a litre of fluid and we went back to base camp. Next day we decided to investigate thinking the fan was the problem. On ...

hey guys,

im chasing a full wiring loom diagram for a gq td42 wagon, any help would be great.

cheers

as it say does anyone know where it is?

cheers mate, just throwing the idea out there lol..

hey guys,

just tossing up the idea of putting hydro steer in my fj45, just wondering the legalities of this up in qld??

cheers.

No incorrect Jim!!

I have a ruler just not a straight draglink. Sorry if I offended anyone but I didnt think this was to much to ask

Weaves again you come to the fore. Thanks you must be the only one with ruler

All I want is for someone to measure a straight draglink from end to end not buy one

I need the measurement from eye to bolt of a straight drag link for a 95 leafy sierra please

How do these corolla carbs going on angles?

Gidday guys

Just thought I'd post up what happened to me. my sierra stopped idling after out bashing a coulpa weeks ago. I did the ol swap leads and so on still no good. Read some more on the forums and pulled the carby down cleaned it and put it back together. Did this twice still no good. Read ...

Thanks will get a shop to do that I recon. Anyone got pics of theres???

Hey B4T

Is the corolla carb from the 4K engine the one?

I recently bent my exhaust at the tip. I remember reading something like "to stop the exhaust coming back inside to run the pipe to the side". I have to get the exhaust shop to replace about the last 10 inches so just wondering where the best place is to have it come out. either to the side or ...

Gidday Guys

Just blew #5 in my sons 82 patrol L28

Anyone know why I would and where I could get a second hand one from??

cheers

Gav

For some reason havent been able to get on this site. Anyway. I dont agree with all the "just put up with it " So I fixed it. The answer was new 2" front kings which have a RH spring with more height and then swapped the backs over (2" OME) and guess what with no one in its 5mil high drivers side ...

After wheelin on the weekend the front right sits about 40 mil lower than the left
So firstly I found the stabiliser bar had lost a bolt and one bent spring. Needed the car so swapped springs with an old set still no good, swapped the ol set side to side and still no good, put a rear set on with ...

Yeah definitely one J as written above. I guess I need a whole new set of rims then?

Need another rim for my zook. Can you tell me what offset by these numbers(stamped on the inside) 16x7J.05 YF. I think they are F100 sunny look alikes.

Oh yeah if anyone has one PM me

thanks