Outer Limits 4x4 Board

I do belive he has a problem still, Screwy stated he has only a single acting ram ........ that mean he will only have a one inlet at the bottom of the ram so therefore only hydrualic power to extend the ram



Don't you need a double acting ram so you will have a pressure in both direction

Hi All

IF you have say you had a problem with phone calls back, most of you are on the net more than phone...shot a email thru, altho most of the competitors do have direct numbers to at least on of the Tuff truck committee members.

The rules for 2007 are listed on the our web site, the website is ...

Have a look at the genuine Tie rods of the Utes.......much thicker rod and external clamping ball joints

Can any one tell what the tube size of a GU td42t wagon tail shaft


Id and OD would be good

To all that have been waiting..........the score sheets are up on the bottom of the entrants page at www.tufftruck.com.au

Ok......there are final placing now up at www.tufftruck.com.au

the entrant photo's have been place in the final placing......there are some interest results....Have to give a big round off applause to Germon Racing getting into the top ten have to thank ever one for coming alone and making it all ...

I would compare the centers.......as I did the swap in a SWB GQ many years ago and the center wer the same.

Hey a talk the makers of the twine showers.....great unit, he also sell pumps the web site is

http://www.twine4wdshowers.com.au

Have you try some fuel addative thats kills bacteria, as bacteria build up thru all the lines when sitting for any lenght of time

there was a Icom UHF in a roof console, a Motarola UHF a simaco amateur and a Linear Amplifier, also a XXXXXL Holden racing tem jacket,

Thanks Guys, the car has been found, missing radio gear, so if you come across any one selling high end radio gear cheap please let police know

A friend of mine had his Crusier stolen last night from Merewhether

the car was a GXL red Landcrusier 93model

had bullbar and winch 4" suspension and 2" body lift

easly notice as he had lot of radio gear

rego RA-2369

if you see ity around report it to the police thanks

It will be the seal on the throttle shaft, and it is a easy fix if your pretty competant, you will need to get 2 seal, the shaft one and the top plate seal, any diesel service center can supply them,


you will need the numbers of your pump, they are on the side of it

The Nissan Auto hubs Lock in both direction..... never had a problem with them on my GU, if you are doing lots of hard core driving I would go with the manual hubs

How about visit the Warn web site, and if you can have them fax the information to you that you need, I have done it before

Have you considered people like blackwoods for a normal pressure gauge and then make a hose to suit.

larger face will give you better range and accuracies

The ponit that showing up on tufftruck site are not the full penality/bonus points break down, Peter got to the 100 points and 20 extra for finishing the course and had 27 penanlity agaist his run.


We had a two bonus points for completing a track

1 if they completed the track with no ...

Have you check all your fuel lines.....one may have a small pin hole...or a clamp may not be tight. dose not need much for them to suck air in the fuel system.....

There is a CD that is selling on ebay.....but be aware it is for the european models....so it dose not cover the Australia models fully

Yes they can be brought one at a time....

with 11 weeks to go things are starting to look interesting!!!!!

got jackets 006 and 007

If you drop the cross member 18mm it would be the problem.....

Had a SWB with 4" lift and only dropped cross member 12mm...did not seem to have any problems at that

Have you Tried Bearing Dynamis in Wickahm (newcastle NSW)

They wee the only ones to seem to help me with Diff Carrier bearings

Have you tried to chase the Filter specialist......I have heard they have them for half that price......only dose not have the donaldson sticker and the top tin cover is un painted

Try this link, I am trying to get this confrimed


http://jamboree.4wdnsw.com


These two sites have every thing you might need to know if not get in contact with a member of the Suzuki 4wd club NSW



http://j4.suzuki4wd.com/locationinfo.htm
and
http://j4.suzuki4wd.com/events.htm
or
http://www.google.com.au/search?hl=en&l ... oree+2004+

www.suzuki4wd.com.au

I purchased one of the 4wd systems tanks about 6years ago, took alot of bumps of road, it is now running around in a LWB patrol....it was the best value for money i had found back then

HI There

You could have a look at this Site

www.redbook.com.au

it is what most of the car yards work off for valuations