Outer Limits 4x4 Board

Good to see this is still getting used

Miss the old zook looking at these pics..

Cheers Vice

Good to see my threads still moving along here hehe.

Cheers Vice..

Prob better off letting it sit in the garage then..

Cheers guys

Its got rego but i dunno about the roadworthy i think the BL would stop it from passing.

Anyone had one pass with a BL installed ?

Cheers

Hey guys. Well its been a long time since iv been here and a longer time since iv been out in the zook. Im thinking i might sell her and just wondering what value you guys think its worth. Its a WT with around 100,000ks on the clock in good nick except some body damage that happened when i put her ...

Hey guys

im looking for a place to buy some bushwacker flares. I know BBM do them but for $880 for 4 i might try shop around a little.

Thanks guys.

Do it yourself it was pretty easy and very nice feeling apon completion..

So much i even wrote it up. mentioned before.

i really need a cage pity i have no metal working skills at all...

Yea i used a few custom plates on the back of the bumper that attach to the rails.

i got a bikini and its great best mod for $100 .

Cheers

hate it... dosent look like a suzuki at all.

was thinking your blown and EFI arnt you.

does anyone think mines underpowered ? just interested.

i got 32s and i find it hard to hit 100 in any gear.nearly the only time i can is down hill with no wind... but yea 100 is pretty scary in my car. so i just cruise on 85-95 in 4th up hill and 5th in the flat/down hill. i was really hoping gearing would help me hit 100 but didnt really. offroad its ...

well yup everything went in ok. compared to the stockies they are a little hard but i like the posture they give and the support. and after 2 hours of freeway driving this arvo me and the girlfrind have no pain and where comfy the whole trip. the only modification that was made was the holes in the ...

due to the fact of saftey in this mod and my lack in exp and lack of correct tools and the fact i was shitting myself about stripping a bolt in the seat, i droped it off at my local mechanic this morning. spoke to him tonight he told me it had taken 1.5 hours for the 1st seat. ill get it back ...

there is a seat post about 5 post down the page if your after a aftermarket one. if not just search seat install i got these 2 older posts talking about 2nd hand seats. http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=102654&highlight=install+seats http://www.outerlimits4x4.com/phpBB2/viewtopic ...

with my new seats the back drivers side bolts are as far as i can see un reachable with the seats bolted in.. i did think of that wasnt sure if thats how you go about it.

the SCREWS ARE SOOOO FCKIN HARD TO LINE UP..... been at it all night..

ARRHH

well just went down and showed the bolt shop what you guys wrote.

got some SHCS 8x20 ZINC bolts cost me 5 $ so yea all with go in tongiht.

Thanks again guys.

Also just emailed you some pics of how far forward the driver's side seat is situated on the stock suzuki seat rails. Hope you're not 6' tall. I'm 5'11" and it's a squeeze! i had a quick jump in this morning and mine must be spaced back more than yours. i dont think my rails where all the way back ...

Lil'Loki wrote:Also just emailed you some pics of how far forward the driver's side seat is situated on the stock suzuki seat rails. Hope you're not 6' tall. I'm 5'11" and it's a squeeze!

thanks man. i should be pretty good im only small but ill see.

Thanks again guys.

MART wrote:Grade 8 high tensile pan head allen key bolts , they come black , gold or silver , 20 mm long , mounted heaps of seats and they have all been 8mm , but as you say , take it with you , Cheers Paul.

Thanks man.

Hey lil Loki

you dont rember what size type the bolts u use where do you ??

i was just goin to take a seat to a bolt shop and ask them to trial. but if i knew then that would save me.

Cheers man.

Vicelore be sure to post up how you went installing the seats as i got some for christmas and will be mounting them in the next few weeks. lots of pics and all the details would be appreciated. Cheers sanger well i had a very nice find i think. i pulled out the stockies and my new ones fit the used ...

Thanks Steve. thats the exact kind of info i needed. my plan will be to attach the plates to the bottom of the seat. and leave allot of excess. place it on top of the sliders (whilst they are still attached to the lower runners) and try to mark where the sliders sit on the plate. remove the seat ...

Mine had 8 or 10mm bolt holes in the base (I can't remember which) that were covered by the material. If you feel around you should find the holes. ok thanks mate. i probaly never would of know that. what type of graded bolts are we talking about for this. Just ask for high tensil ? sorry i dont ...

I added a plate to the top of my sliders and bolted my seat to the plate. Un bolt your seat off the original mounts an bolt the plate to it then you drill the new holes for your new seats :cool: thats what i thaguht i would have to do. does the plate just screw into the sides of the seats ?? its ...

they are autotechnia ones seemed about mid range. i was told i got them below cost at 240$ each due to some scratches..

Are you guys saying that you cant use the suzuki sliders ?

i got nothing with the seats. which did suprise me a little, but iv never baught any before so didnt know what to expect. have you got any pic of the underneath of your seats when u screwed the sliders on ? my main worry is that there isnt much to screw into on the bottom of the seat. from what i ...