Outer Limits 4x4 Board

Hey mate.

Best build I have found yet. One question..

Can you show me how you nodded the D pillar to be able to weld straight to the c pillar?

How did you change the angle inwich the roof sat!! Cheers

hey guys i have an 88 model gq td 42 running 32in mtx,
im planning on putting a jdm turbo kit on it and an intercooler. i was looking at ebay intercoolers but i know nothing about them what size cooler should i be using\cheers

yeah i will definitly be leaning towards a wagon mate.

i do dig the utes. my old ma has one,

i need more then three maximum seats

danwinGQ, what size petrol tank do you have?(BEING ON GAS) cause thats another thing thats turning me off the 4.5?

hey guys. i have own a 1991 model sierra. but im up grading to a real car :D now i would love a 4.2 turbo diesel. but the ods are slim. so im leaning towards either a 3.0 liter turbo diesel. or a 4.5 petrol. i would prefer the 3.0 because of fuel consumption 4.5 but i have heard the 3.0 blow engines ...

thanks blue suzy

no its not the pinion is broken cause my pinion bearing collapsed and it hit the housing. and chipped the tooth. whats the standard ratio for suzuki sierra

hey guys. does anyone know where i can get a standard pinion gear?

does anyone know where i can pick up a second hand one?

hey guys, has anyone made there own long rangers?

thanks for all the info guys. ill definitly check out bluesuzy.

cheers boys thanks for your imput.!

cheers.

yeah im getting 6.5:1 transfer gears. and ill make drop shackles and extra inch body lift. i also have a vitara power steer so that will solve that problem.

why will it be no good as a daily?

hey guys. i have a 1991 model sierra soft top. its got 1 inch body lift and 2 inch springs. stock 1.3 (soon to be 1.6 efi) and 31inch silverstones. i wanna go bigger with the tyres i want to start running 33s but im unsure of the clearance, do i have enough alread or do i need more. i have read that ...

steve. the shackles were in the car when i got it. and i was just curious on what actually made it run like that.

hey guys. i used to have 4 inch extended shackles in my zook and is seemed to wonder on the road. i had to take em out for a road worthy, and could not believe the difference between them and standard? any ideas?

zak

how hard is it to mount a vitara power steer

hey guys i was wandering how many ks everyone is roughly getting to a tank of fuel in there zookz

how hard is it to mount the vit box though?

also it rea;;y only makes the noise when i accelerate

hey guys.

my gear box makes a loud rattling noise in first and second on the not so rare occasion. i hear the noise in 3rd and 4ths just not as strong?

any ideas?

get a bearing (180B rear wheel bearing I think ) and a seal and you will need to modify the mount.

why do i need to get these?

thanks cj. yeah i have seen benT adapter kit befor. looks decent but if i could use the vitara gearbox it would suit me better mine is making some weird noises in first and second.

yes your right it is a stupid question. hahaha

the vitara is a manual. so it will bolt straight up or will i have to fab up some mounts?

yeah the wiring loom is the hing that is confusing me.

hey there, i recently picked up a vitara that had been crashed but not written off for a $1000 And im planning on doing the 1.6 into my sierra, from what i have gatherd you need a 1 inch body lift. which i have, you need an adapter kit. but what about the wiring loom. do you use the sierra one or ...

hey guys. i have a 92 model sj70 which i recently purchased it runs 31.
i was wandering how much hassel it is fitting a vitara 1.6 efi, cheers