Outer Limits 4x4 Board

mine had the same problem, and was slow on the starter motor. turned out to be the earth lead from the body to the thermostate housing, replaced it with good cable and made a massive difference.

i allreaddy had another earth from the body to the intake manifold, but must not have been earthing ...

i had them, sold them and brought externals

see there work first, my rims were done by a mob in bayswater, they now look like poo 6 months later, all the powdercoat has cracked off the first time i did wheel nuts up!!!
theres a good place out at cambelfeild, ring stu at induro, he will be able to tell you what it is called.

oondy, sounds good, i am in the market for one atm, can you post some pics of it??

Smithies outback gear - - 59954325

Willy Hilux wrote:Watch out for postage price. He is through the roof!!

shop around for price's in general!

i'm putting a cage in the patrol and i was going to mesh it to act as a cargo barrier.

what size mesh have people used for this???

thats for a GQ i don't think GU's are the same.

44mm on the OD on the steel part, and 30.5 ID on the rubber. measured with a rule, don't have a vernier here.

I'd be interested in one!

http://www.youtube.com/watch?v=LWimJ2D2 ... re=related
wow.

Same comp dave?

i've got a housing for the patrol that might have a slight bend in it, and want to get it checked out before i strengthen it.

Anybody know where to go in melbourne for this?

oh and i couldn't find anything using search

by the time 2 driving lights and a high mount go in front of it, ya won't see much of it

good on ya! the cooler has less than 5 mm behind it against the air con condenser, and i'd need to cut the gill out to clear the highmount also, so i all went

600X300X76 fit pretty neat! mines just a cheapy of ebay, seems to work for the money i paid!

You can get this 6.5 antenna in a combo with a 6" 3db so you can have the best of both worlds. My head unit is under the center console at the rear and the face of the UHF is on the console in front of the gearstick.
There are are few people that don't like Uniden. Ive had 7 Uniden radios and ...

thanks to all envolved, especailly to the marshalls that give up there time for the comp! we had a great weekend!

Does anybody have pics of the black style side GQ car 26?

Thanks Greg
Navi in *26

how much power are you putting out?

Cal's still break, i know of two that were broken at Vic winch!!!

are you serious? putting airlockers in gets rid of the weak sidegears found in toyota 8" diffs especially. its just weak shit your putting back in your diff, i know what i'd rather replace.....an axle or a full locker and a diff rebuild?

14 or there abouts because my pump is stuffed, cool it and you won't have a problem. its the EGT's that kill these motors!

thats great, those pillar pods arn't angled in the right direction anyway IMO, good work!

so having a front mount cooler and not being interested in running a water to air, is it going to be worth chopping the top off my inlet manifold and welding on a peice that you have shown matt? anybody tested that sort of mod? to distrubute the air better between the cylinders... i don't have pump ...

This discussion has been around the traps a few times.

I believe the ADR's stipulate that flares have to be tough enough to resist impacting pedestrians etc. Read it once or heard it but I think that was the sentiment of what flared guards are to be constructed of.

Ie if you brushed up against a ...

4" snorkels provide more flow if your chasing power.

yeah i took mine from the sender, as a mechanic mate said that gets pressure first, easy as.

Hey everyone
am wanting to intercool my 4.2 it is currently running 11 psi boost and has a dynamic turbo kit what sort of intercooler setup would be good on also is it worth spending the money on putting a ball bearing turbo in it all advice will be appreciated thanks

after being in a non cooled ...

an 80 front centre is the same size as a hilux rear diff, i blew two with a 22R......go the GU, if your looking for the biggest brakes, 4800 patrol's have the biggest but you'll need 16's to clear the brakes.

yeah come back up from under the batt tray, its pretty simple once ya start doing it. a chippy can work it out

pic sof the 2nd batt and cooler piping, the cooler piping is 2.5" mild steel and i used donuts to do the bends, will be done in alloy eventually tho.

can't see big heaps in the pics tho.

http://i206.photobucket.com/albums/bb212/GQgerg/IMG_0411Small.jpg

http://i206.photobucket.com/albums/bb212 ...

thats a realy neat setup. do u have any more pics? mainly of your intercooler piping and intercooler mouting. do u stil have an air con condensor in there as well?

i was looking at putting a FMIC on my turbo gq but piping was looksing a bit tight around the battery on the drivers side.

i'll get ...