Outer Limits 4x4 Board

Bags crap out of me then later that day sends me an email wanting parts It's like dealing with the friendly mentally ill Sorry we only deal with TOLL now not Green's transport , Steve and his business went under Anthony , sorry im away in Tassie should have been back last Friday but had an ...

Hi Lowbox , yes they are longer by 30mm front and rear this helps to roll the diff back to correct castor angle , we do a core charge of $50 but seeing your over NZ frieght would kill you so it's just the straight $500 , most of the people who have them fitted just fright them a week or 2 later once ...

I have on shelf Rovertym front and rear arms and aframe spacers direct from the USA .
Front arms $500
Rear arms package with aframe spacers $450
your welcome to email me at
www.teamslowracing.com

sorry forgot 930am we are heading off , the more the merrier !

Hey mate , there are 3 of us going up this morning your more than welcome to come along !!! meeting at the Caltex at the bottom of Greenmount on channel 14

Hi I deal in Pro-Comps importing direct from US and Rovertym and have the distribution for READY WELDER . The ES9000 shockies have just landed { second container , first sold out } and have all configurations up to 35 inches , we do business a bit different than most and have hi-turn over low mark ...

Check your thermostat , 10-1 its been installed upside down , thus your pulsing / knocking thru your hoses and car . Don't laugh I have seen it before on a Patrol !

I have 4.1 cwp in now and they made a huge difference from the old 3.54 diffs . The cwp arnt that expensive and once set up right are fairly strong .

We have just had another contain land with Pro-Comp 1000 which are fully valved to be the replacement for stock standard suspension , Pro-Comp 3000 again fully valved for L/R R/R and ES9000 in lengths up to 35 inches extended travel . Afull range of eye to eye adaptors to suit ! The MX6 have nearly ...

Hi to all , I have Pro-Comp shockies for Rangies and Landies in either ES9000 or the MX6 fully adjustable 6 way shockies available to suit your requirements , fully valved for Rovers in standard length to 30 inch extended .Steering dampers also . Prices vary to the appliation but you wont buy ...

yep dats it ! I will give ya a call tomorrow thanx heaps ! i was only given their old number and a lady that answers is begining to hate me and everyone else ha ha , and talking to the Telstra robots who couldnt find it either [suprise suprise] i was begining to give up .

Yeah i realise the % of getting them is small but i thunk $600 for the flares is a tad bit on tha loony side of the spectrum :eggface: I rang up Rangie Spares 5 months ago for a price and they were $430 and rang up 3 weeks ago to order them and they were $600 and $50 freight to Perth , i need to cut ...

I have up graded my axles to Ashcroft , fine spline , with fully rebuilt front n rear diff , its already lifted 50mm in body and 3 inch in springs , the ZF was totally rebuilt last year by Auto mac , the transfer was redone last month by Rovertech , along with the CV's .I also have imported front ...

ha ha ha 35's hey , yeah i will get a set but not for this one , its cheaper to buy another set for the up n comming 78 model , rather than replace the hairy lasoe as that gets half of everything ha ha ha and they are a spite-full mob ha ha the j trekkers wont be in for a few days so im still muckin ...

this is for my family / camping / play car , i have a 78 2 door thats going to be for comps , but still being built up and that will have 35's on . I realise 35's are better for ground clearance but i will have to go to ARB and get them to install an escalator for the leader of opisition to get in ...

Thanx for that , i went to one of the dealers again today and after much deliberation i ordered a set of 5 Jungle trekkers 33x10.5x16 , the exteme trekers being directional would mean 2 spares and about $40 per tyre more each . Im off to do some cutting on the back quarter panels now from just under ...

Hi to all , Im chasing opinions on the Simex tires , I currently have 255x85x16 BFG m/t and with some cutting and flares comming I would like to up grade to a 35 x10.5 x16 Simex , but i have had so many different angles of pitch by the 2 dealers over here on whether to fit the Simex Jungle Trekkers ...

if you finally fix all the leaks , take it straight to the dealers and they will rectify this ! Its an in built saftey feature , when it stops leaking , its time to top up .. and its rust prevention built in

Na already called , they are only a fibre over the original wheel arches as on the ES model , thanx anyway much appreciated .

Na already called , they are only a fibre over the original wheel arches as on the ES model , thanx anyway much appreciated .

No such luck im afraid ! But still hanging in there ha ha , but if i find any i will let ya know ! One of those things where i will go out and buy them and all of a sudden some one will know of some cheap haha ha ha Murphy's Law aha ha ha On a serious note , thanx again for the info from those who ...

Hey MadRangie , i use and highly recomend Dynotec cams 217/216 they are unreal , the price is on average $190 and sourced from Rovercraft 0893770080 in W.A

I would like to giva thanx to my mate Kevin Bowers who has helped me out no end with sourcing the Rovertym Arms and retainers thru the U.S , he's done alot of home work for his dumb axe Aussie mate ha ha ha ! Thanx also to all those who replied with info , it was greatly appreciated ! Regards Brad

yeah its a Rangie spares one , I picked it up from a guy who never got around to fitting it up for $50. It was no dramas and works a treat , i just got industrial vaccum hose and plumbed it in . I was hoping to get some flares and fit them up this week , but the Rangie Spares ones are pritty ...

i havent fitted a spacer as yet , but one is on the way .The arms were sourced off ebay and sent out to Australia . I have sourced front Koni shockies and rear now , thanx for all your help ! Im just fitting a snorkel up today so with a bit o luck i wont go over board with the grinder ha ha ah

no there is no vibration at all , as the diff housing with the new arms has rolled back to the original position , so there is no angle off the camber thus twisting the diff off center and the arms are made to take up to 5 inch over coils . Check out the site www.rovertym.com , also yes i have a ...

Just one Q , what state is Top Performance in ? Thanx

Hi to all , im chasing a set of Rangie Spares 4 door flares if anyone has a set they havent yet fitted . Frieght isnt a drama . Also i fitted a set of the front radius arms from Rover Tym in the U.S , the result was amazing , the camber was immediatly rectified and driving is that now of a standard ...

Hi to all , I have an 87 RR and have a delux ARB bar on , but need a winch bar to house a warn 9000 or sim , anyone have a ARB winch bar triping them over in the shed ? Or is there a way to modify my bar ? i have been informed that its not at all posible to modify and would cost more than a winch ...

Hi lowbox , as Michael stated there are a whole lot of guys running systems that are better than the "off the shelf" systems out there ! I believe Madrangie for instance has had made a better Aframe , others have made bent trailing arms , Big balls have adaptors so you can run eye to eye shocks on ...