Outer Limits 4x4 Board

I am building up a zook and need break and fuels lines installed and a couple of bits of welding I am in Birkdale Qld and will obviously pay

Intrested ring me

Rhys
0414 768 248

I need to get a few things fixed, heater lights and aircon, is there a good one out Cleavland way?

I am still stuffed even got my house mate to check
i dont have a dimmer switch

What else could it be?

All fuses checked and ok
Dont think there is a dimmer switch as its a pov pack but will check (please let me be that stupid)
how do i check the earth?
will pull a bulb and check it soonish

Turned the lights on one night and no dash lights, like the stealth look but had to know how far under the limit i am

What are the usual suspects for this?

come on own up
who's is it?

http://www.facebook.com/photo.php?pid=2 ... =722911681

thanks for that guys
5 and 5 with a 2.5 sweet

Spent yesterday tidying her up, painted the rusty chromes mat black and a few other bits too. Took her out for a big hill run so much fun 3 gear changes where in the race car i would have done about 100

Hi all Well after 3 weeks of searching i finally found a truck i like and am now the proud owner of a 1982 diesel (no turbo) 60 (and a 82 starion, and 3 zooks which average out at about an 88 and a 03 Roadwarrier). Now as i have had it 22 hours i guess its time to start modding :) The truck has a ...

How did you go?

Did you win or hit it with a big hammer?

Thanks Adsport
What did you run the ze in?

Grrr why are you not in Brisbane so i can look!

Do you know if its a standard Serria radaitor?

How are you plannign to fit the break booster?

What sized exaust is it running?

What is the hole inthe bonnet for?

Its about 20 min from mione so perfect!
Can you pm me his detals as serch says he dont exist

Thanks heaps!

Now back to the point of this post

Who in Brisbane or the Gold Coast has a workign ZE in a serria and would not mind me taking a million pictures and askign a thousand questions. I will bring Beer

Sorry my bad the point I was making was that a ze injector is bigger than a ge injector. I bought a complete ze and am not planning to mod it in the near future. I knock around with a couple of Toyota nuts and if I need advice regarding the engine I talk to them, unfortunately for me they have never ...

the injector sizes are quite a bit different
"gze ones are 365cc from memory and the 4ag 288cc"

I have been told by a very reliable sorce i need to get as much fuel to them as possible and the best way is the dunny door pump.

We will agree to disagree on the surge tank

Dank thanks but sorry the tank has already been fitted its from some small jappa with in tank pump. The pump is to small for a ZE as it wants lots of fuel and the surge tank is because i tend to play on "intresting" angles. Gwagensteve I have no god dam idea what you are on about but thank you

i have he moter and box fitted its the thousand and one other things i want to check out
what radiator workes best
fuel pump
exaust size and location
break booster
and stuff

mine cost me $150 delivered from 40 km away

Ok i have PM Drew but no reply yet.

Does anybody else have a GE or ZE i can check out?

Hi Guys Its time for me to get serious about finishing the truck and gettign it back on the road. I really need to have a look at a couple of other trucks to see what has to be done with wiring and plumbing and stuff. Long story short Who in Brisbane or the Gold Coast has a workign ZE in a serria ...

Sorry if this question sounds tarded but

How close does the end or the gear box and front of transfer case have to be lined up?
How far off centre can it be with out causing virbation?

Hay all
Mine should be out of the shop and ready for em to start workign on soon.

What radiator have you used for the ZE?

Do you have pics

Do you live in Brisbane and can i come and look?


Ta

Um well i dont think it can be poor maintenance on the belt as i would have replaced it when i did the altinator, any other ideas?

ok update Took off the water pump/ altinator belt and the squeek gone so the fault is in that system. I dont think its the altinator as i have just replaced it and it seamed to be in great condition. What ever it is has shreaded the belt with about 1/3 of the thickness missing, it really looks like ...

tried to do the screw deiver trick but not enough room to get it in!!!

Where do i get a stethoscope from?

Hi all My flate mate has a Feroza and it has the worst sounding engine squeek! Sounds like a loose belt or dead berring but belts are tight and drowing the bearing in crc didnt stop it. They have been told by a mechanic its a normal problem for a Feroza and there is nothing that can be done Is this ...

Dude good luck

i cut mine longer in the roof as i wanted better sun protection and will be getting my strength back with an EXO

I gotta say the high top is one of the uglyest thigs ever made, any thing you do has to make it better!!!

From WE ROck rules 5.23: Weight Weight is the total vehicle weight. 5.23.1: The vehicle must weigh a minimum of 2500 without the driver while competing. A W.E.Rock marshal may approve weight reduction based on damage while competing 5.23.2: Use of environmentally damaging compounds, fluids, etc. is ...

I have never understood the thery on why autos are better on sand.
I know i can change a manual substantually faster than an auto and i know exacty when i want/need to change

If you pop the door lock out you will find a code written on the side, if you tell a good key cutter they cn cut you a new one.

Cost me $20-25 when i lost the keys to the starion

Oh the code is normally on the drivers side door too.