Outer Limits 4x4 Board

Ok so my rear main seal went a couple or months ago and I've been dreading pulling the box out to replace it, that was until my clutch started to slip :(. So I went and sourced prices for clutch kit and found the awesome 4Terrain by Clutch Industries which we have tried and tested in three patrols ...

hey guys, i have 96 gq patrol owned for 2 years, problem is put turbo kit on was fine put the 3 row heavy duty radiator in and its fine, problem started this year car is fine up to 80kmh sit on 100 and it creeps up gets to about 3mm under the line before hot turn the heater on its abit lower. had ...

The ball joint "flip" doesnt get you any extra height really, just regains some of the downtravel you lose from cranking tha bars right up and helps fix the camber problems you will ahve with the front wheels looking like \/ It is more of a joint relocation as all you are doing is bolting the mount ...

not sure on pumps and lines but you will also need gu steering relay rod. the gu pitman arm is upside down compared to gq Thanks to this post because my friend was to able to put the GU steering box into the GQ. He had some troubles on how to put it but luckily we found this thread. It was really ...

http://www.jeepin.com/features/nss/index.asp http://www.cherokee-jeep.com/1-2swremov.htm" onclick="window.open(this.href);return false; My cousin has also encountered the same problem with his Jeep but the website were really helpful. We also did just remove the neutral safety switch , clean it and ...

havent started me petrol gq in a few months and when i started it up had no oil pressure to start with then, just warmed it up on about 1100 rpm for a few minutes and the oil pressure slowly built up just past one then few minutes later dropped to zero, shut it off, waited few minutes and started ...