Outer Limits 4x4 Board

ausyota wrote:Does this help?

Helped me!

That's what i was after!
Thanks Jason.
Carl

I don't think you'll have too many dramas with the box but like everyone else ,i think you should look at a diff upgrade.

Hi guys, i'm just after the torque settings for the head, main and big end bolts on my 351 windsor?
Cheers Carl.

Just use the factory ECU ;) Unless your planning engine mods, smartlock can be erased, i'll give you the number of the mob if you get into it further, i've done a couple of Ford 5l's
If you could get that number for me that would be great!
I thought i was going to have to go back to a carby and c6 ...

jet-6 wrote:I set up an Autronic SMC onto a EL XR8, same engine, wasnt to bad apart from in that car the body module had to be incorperated to make the gauges work, but in your case it will be a walk in the park with any aftermarket ECU

Did you need to replace the sensors or just use the existing ones?

macca81 wrote:where is the electrics in this question....??

ECU, harness and related components.

I tried the search thing but didn't get far!
I want to put the 5lt and 4spd auto out of my 1993 Fairlane into my F100.
Is there an aftermarket system i should use and what costs would i be up for?
Would i be better off selling the motor and putting in a carby fed motor?
Carl.

Mine fell off a dump truck and they use 100 psi to run but sound awsom!

There are a set of HID lights that are a copy of the Rally 4000 on Ebay for usually around $500-$600.
That is the pair complete!
They even come with Rally 4000 clear covers.
I'm keen to see how they would go.
Carl

Kingy i beleive he is trying to use the hub on the pivot not to mount the wheel.

Also if its cast steel ive never had a single issue with just pre-heating and welding with a mig. My buggy has run at a guess 20+ Rock Crawling events with a Cast steel Welded steering arm that was welded with a mig ...

Well, a Rover has won Tough Truck, well sort of. The vehicle is a 1986 Rover Bushranger 4.8L with the following mods:

Transfer gears, 4 wheel steer, air bag over coilover shocks, 39 Bfg crawler tyres, unimog portals, Nissan diffs, rover running gear. Basically the same car as last year with a few ...

Found a broken fuesable link.
SO..............in my infinate wisdom :roll: i bridged it with a piece of wire AND hey presto we are on fire :bad-words: .
The smart lock module had a meltdown and looks like the starter circuit is at fault.

Now for plan "B" :twisted: :twisted:
I am going to part out ...

Hey all im looking at putting bigger diffs in my disco (its got 10 spine diffs) i am looking at the option of nissan safari/partol diffs as they are reasonable cheap to buy and they have good ratio's and cheap LSD's/lockers has any one done this conversion and could tell me about any problems they ...

...and you end up with more unsprung weight and lower pumpkins!!
AND MORE STRENGTH, LIMITED SLIP DIFF, MORE CHOICE OF WHEELS AND TYRES, BETTER OFFROAD ABILITY, BITTER DIFF RATIOS.
There are always people who arn't gunna agree with you but thats cause they usually don't know what thier talking ...

You can buy an adaptor hose that will allow you to empty a BBQ Gas bottle into the LPG car type filler. From memory they're on ebay for about $50.


I think they normally call them decanters....
This will not empty your BBQ bottle but it will syphon LPG from one cylinder to the other until the ...

Hey all im looking at putting bigger diffs in my disco (its got 10 spine diffs) i am looking at the option of nissan safari/partol diffs as they are reasonable cheap to buy and they have good ratio's and cheap LSD's/lockers has any one done this conversion and could tell me about any problems they ...

There was a rodents nest under the plenum where it curves over itself :roll: So i pulled it off and a coulpe of the breather hoses and vac lines were shagged.
I have replaced all of them today and cleaned all plugs.
There is fuel comming through and the tank is nearly full.
Hopefully tomorrow it ...

Thanks guys.
I didn't mention that i had already sprayed aero start down the intake .
It did fire and was trying to go. This is what made me look at injectors. I will try taking the fuel line off and check the fuel pump tomorrow.
Carl.

Hey guys, i've got a 5lt Ford Fairlane 1993 NC. It has spark, fuel to fuel system and power to the injectors but will not start.
It was running fine when i turned it off after getting home from work but when i tried to start it to go back to work the next morning it just wouldn't start.
Can somebody ...

I used some scrap pipe (115 od i think) and it works fine.
Carl.

That is some funny shit!!!
I've done a couple since reading about it on this site a couple of years ago and have never had trouble.
Carl.

Just had a look, and it goes to a switch/solenoid of some sort that is bolted to the side of the battery tray.
It is wired up, but can't trace the wire as it disappears under the tray.

Must just have popped off yours?
When i had my 91 auto it had a vac switch for the cruise control.
Either way ...

You can fit the system yourself. You just need to have it certified by a profesional.
The systems are easy to fit and can be done in a day.

Mid to late August would suit me, but if thats to late i could possibly sort it out.
Carl

I'm keen! Just need plenty of notice to sort out time off.
Carl

There was an article in our OH&S magazine about the use of these helmets... They were highly recommended for hobbyists but no at all recommended for tradies. The claim was made that there is a slight delay between sensing the arc and the darkening of the glass. In an independent test, over time a ...

So around how much am i lookin at for an engine replacement???
I did it myself and it cost $190 for clutch(uses Holden), $15 to copy the adaptor(thanks Sam and sorry for taking so long to get it back).
Engine mounts were a piece of off-cut RHS, exhaust was block huggers that were on motor.
Yes ...

I am the prowd owner of a 1984 2 door range rover but am a bit inexperienced in cars so i was wondering what i can do to give the 3.5 litre v8 more power and better fuel economy?? Can somone help me please
Alot of people will tell that flogging a dead horse is ok BUT the only answer is to fit a ...

Hi , new to the scene, have a GQ & am running 33X12.5 15 on sunraysia rims, and am seriously due for new tread, have been looking a the new Cooper STT's and Cooper ST's? Is anyone driving on them or does anyone have any comments pls, i am 60% road/40% off, mainly dirt/mud/rock-no sand as yet..need ...