Outer Limits 4x4 Board

Anyone used Ian Prain from Pakenham???? I've spoken to him about GVM increase on Patrols, but wasnt interested.. interesting, cause he did a mates Troopy few yrs back.. Robbo had good things to say about him... Speak with him, but he seemed to want to be specialized in what he did, I asked bout ...

most engineers will want to be involved before you start, ken mcharg in mirboo nth and some dude in sale are the closest in the valley, ken has done quite a few 4wd's and will give you a good idea of what you need to do. we use him at work and for my own stuff. YOU WOULD HAVE TO BE MAD TO USE THESE ...

most engineers will want to be involved before you start, ken mcharg in mirboo nth and some dude in sale are the closest in the valley, ken has done quite a few 4wd's and will give you a good idea of what you need to do. we use him at work and for my own stuff. YOU WOULD HAVE TO BE MAD TO USE THESE ...

nissan fd 35 td engine where the hell is the engine number .
I know its on the block but where on the block ??

thanks

v6hilux wrote:I'm a bit concerned about turbos, blowers and LPG.

What about blow-by and filling the crank case with gas?

why are you concerned if it fills the sump with gas it just blows the sump and rocker cover of fit a new one

omvl converter .. 5L efi mixer... aeb295 computer.. works good

or inject it but $$$$$$$$$$$$$$$ and more $$$$$$$$$

sitting here reading

all i can say is you get what you pay for . if you want a comp then buy one pay the money .
if you want one you may use on the weekend and cheap but works buy tigerz11 gear


dont compare a mini to a mack

flame suit now fitted

disco and fork lift fans & jeep are reverse rotation

good luck

it all comes down to
good works not cheap and cheap works not good
work out what you want
cheap shits worth nothing in the end
good stuffs all ways worth something

running lean or coils

justinshere wrote:Hey

As the subject states, im making a staino snorkel this week and im looking for something to use on the top to stop water getting in.
I was gunna use a standard snorkel head but they are like 100 plus, screw that.

Any ideas? and pics!

Cheers

try $35 from truck place

660 Magnum

DONT FORGET A CAN OF START U BASTARD

check the comp cold then hot

ok lpg lockoff it may do the job just worth looking at

gas lockoff ????

Out work lux started shuddering after 5000kms and Toyota fixed it under warranty. I have been told by a reliable source that they have a problem with the fly wheels and toyota are telling the dealers to keep changing clutches until they come up with a fix. :oops: Tell the dealer that you know of ...

new hilux T.D has anyone had the clutch shiit it self after 20 000km
did the cover it under warranty

heres some info on price roolights wholesale price is $115 + tax+freight on special to retailers
so go and get a deal
245 is to much

NEWGEN (omvl) spend the rest of your days tuning it
IMPCO the go set and forget and u can get good power

Willy Hilux wrote:I got a Spare in Brizzy.

i got one if you want it gippsland vic

also running lean

fit a balance tube if u can that should fix it
advance factory + 2 degrees

will start idle good rev upto 1500 rpm wont rev
other wize runing ok
put new fuel in it . new filter . bleed system still dose it .

what do you thinks wrong

perkins 4108 was runing good started it to day will idle rev to about 1500 rpm


injector pump ????

the stuff i used was a water based sealer said on ther can was for sealing enamel worked for me.

Allows acrylic to be sprayed over it

I got it from paint right

Note... I know fu*kall about painting just worked for me

Good luck

You can get sealer for this job try auto paint store

intercooler joins have those sizes check ebay

that wont work. ill try to find pic

on the loom right hand gaurd there is a wire taped up taco will run of that wire