Outer Limits 4x4 Board

You'd need to check bolt spacing for attachment but i used the brackets made for the ARB parratus seats with a set of OBX seats. Not particularly cheap, but as the clip for the seat belt attaches to the seat rail, i wanted to make sure it was done properly with the calculations done. It comes with a ...

Sorry, to clarify. Connect spare battery to relay box only.
Keep your normal battery connected and used for everything else.

If there is an aftermarket alarm/imobiliser installed, these sometimes can cause this behaviour by design. although it should happen everytime. When you remove power and then put on power to an aftermarket central locking relay box it will usually trigger locks so maybe it's not wired to power ...

Thanks.

Hi Guys, Some friends of our have recently bought themselves a D21 navara. I haven't seen it yet but they been out and about a couple of times for some real easy stuff. They want to go on a trip with me and the mrs this weekend but i haven't been able to workout (without seeing the car) if they have ...

the fridge will shut off on low battery to minimise damage to the battery and stop damage to the fridge motor
It will not cut it off early enough to give you enough juice to start your car.
Thats what a dual battery system is for.

personally haven't heard of this product but it appears to be made by vertex standard who make yaesu amateur radio. If they're anything like the amateur radios then it's probably a good product. Thing to remember if you get one of these is that you're on your own. If you get an FX324, everyone knows ...

be a bit more specific.
Because this is portable but probably not what you are after.






just hook it up and away you go.

not sure if it's still the go now but a couple of years ago it was th FX324
You gotta hunt around as they stoped making them
If you still lookin in the next month or two and want this model i will be selling mine. Just gotta find the power cable :S

2.0mm!! Woah thats way overkill, for my rollcage I only used 0.9mm tube which the teenager at supercheap told me would be plenty! Think of all the weight you'll be saving. :finger: And to save even more weight, Don't weld it. Welds are much heavier than the tube. a much stronger and lighter ...

I rang every engineer (in VIC) and no one would sign off on a body lift in my GU as i had a drivers airbag.

But in hind site, the car doesn't need a body lift. It can run 35's without it.

Matt

I used Novus in Mitcham (east burbs of Melbourne) after being recomended by Matt at Blackburn Nissan. (they do on site work as well) I copped a decent rock that made me replace the screen a few weeks ago. Pricing was one of the cheaper ones. Also, be aware that a lot of the time they need to replace ...

decided i'm going to get someone else to do it, now i just gotta get prices and someone that can work in with my work schedules for drop off/pick up.

A common farmers alternative to provide compressed air out in the field is to get an old VW engine being aircooled and all. Mod it to run on 2 cylinders and the other two act as a pump, mount it to a small trailer or back of the ute.

as far as hole positioning, get one flare and one permanent texta. hold in place then mark the spots where the clips touch.
Or if you're really picky, ask the wrecker to let you trace off the car it comes off.

anyone else?

Hi Guys, Is the exedy safari tuff clutch still the clutch of choice for the GU 4.2 turbo diesel? and if it isn't then what is? Is this something i can tackle myself without a hoist or should i just get a workshop to do it? And is there anything i should get done whilst the box is out. Things ...

depending on cost but deff interested. (in a GU)

Did you not see the word relay in my diagrams? I saw the word relay, but i also saw the words "lamp" and "or" running the power back and forth when it's not necessary is not good practice (just like me leaving the fuse off the diagram is not good practice). Whilst i will concede that if this was to ...

What about a fuse to prevent the car burning to the ground? It was a long day, and for me fuses go without saying, although you're right i should have put it in the diagram. I was more going for the general concept of what needed to be done for the most basic of setups. If i were to do it myself i ...

depending on your switches/light you may need to install a relay. if either switch is on the light will be on. It requires both switches to be off to be off.. Only downside to this setup is if you get some little %#$ turn on the outside switch whilst you're parked somewhere you can count on a flat ...

i had a similar problem when i had the troopy, it turned out to be a dud relay.

you have a noisy electrical system. I imagine you most likely have a petrol. make sure your antenna's earth connection is good. Check your coax termination on each end (particularly the shield) and make sure it's a good clean solid connection. see if you can borrow someone elses radio (pref ...

Btw, once it's in i'll prob pay y ou guys a visit. I beleive you'll be looking at my neighbours GU ute that had a little drink on the weekend, once the motor is put back together.

it's a dual solenoid type.
This is the manual.
http://www.blitz-performance.com/includ ... -Color.pdf
I'll have a good look through the manual after work tonight.

Blitz I-Color

sorry, i should have pointed out i know diesels don't create vacuum except with a seperate pump.
This particular controller wants the vacuum i guess to know when you're off the throttle.

Hi guys, I have an electronic boost controller which i am looking to fit to my TD42T. Only thing is, the controller has a tube on it which says "Connect to the surge tank, or a place that generates vacuum with throttle OFF" Any hints on where i would have to connect this in order for it to function ...

hope that helps

unlikely but possible. some of the 4.2 turbo diesels have a blow off valve as well as the wastegate (not sure about the 3.0's) go to a plumbing supply store and get a 1" BSP copper plug (male thread) unscrew the blow off valve and put in the plug. The spring weakens over time and lets boost out ...