Outer Limits 4x4 Board

Has anyone, or is it a matter of, taken front diff, transfer and other bits from a 4x4 and put into a 4x2?

Is it that simple? Considering there is no transfer lever and wiring harness is already in place. Is there a computer? assuming the rear prop shaft would be shorter to allow for transfer case.

well the pad is there where the number normally goes but there is no number. apparently the police will issue me with a surrogate number and i then have to get that stamped into the block and can use that for the roadworthy. all i wanna do is hand it over to the buyer and get the money for it. does ...

yeah prob is that the inspector guys have to visually see it on the engine before they will give me a safety cert. they said i may have to get qld transport to issue me a new number for it and have it stamped onto the engine but thats crap. surely its there somewhere.

narp thats not it. that was only a short number

Hi everybody, the paj is going to a new owner tommorow afternoon yippee. what i can't find is the engine number on the actual engine. 3.0l v6, anyone know where it is??

mike

hi,
having not actually used the ranchos and the original info supplied by bitsamissin i think back then you could get a kit from rancho that allowed you to use the standard pajero bolts and that shock. Weather or not you can still get the adapting kit you would have to ask rancho otherwise a bit of ...

not sure if it will fit. you are welcome to pop down and try it out this sat if you want. gimme a call 0419 653 161.

mike.

Finer Filter for 3.0L V6 Gen 2 pajero.
Also has pre filter(not used) and half a bottle of oil.
It is a cleanable, re-usable filter made from foam. Will supply it clean ready for oiling and in original box. its in VGC as well.

Can post and is in Albany Creek, Brisbane.

$40

you shold buy a pajero to tow just the boat. i got one for sale heheh

heres one from the past and a real one

Well i pulled the bar off a LWB originally and it went straight onto my SWB so no probs there. If anyone wants to work out transport it is about 17kg, its 104cm x 20cm x 20cm and its coming from 4035. I not sure if auspost would send it but i sent the bullbar to sydney by toll ipec, dunno how much ...

Hubs are sold. Why doesn't anyone want to buy the towbar? It is the best mod you can make for the back of your car especially for recoveries.

Body blocks are sold and added another piccy of the towbar installed

The mitsu ones are definately the best. Can you beleive that i still have an original mitsu boot on my right outer shaft and its been there since the day they put the car together. In comparison every other boot has been replaced at least twice but only with repco boots. Piece of cake job, just ...

added some more bits and pics guys. please buy my stuff. its for a good cause.

Got one thanks guys.

Anyone got a spare bumper lying around there missus would like you to get rid of? Will pay you of course.

pm or email me osborne_mp@hotmail.com

Hi guys,

All these bits are from my 93 NJ J-Top SWB and are located in Albany Creek, Brisbane.

I have as follows:


Autotechnica full leather steering wheel and boss kit in VGC. $100



You can email me at osborne_mp@hotmail.com or pm me or post here if ya wanna piccy.

Mike.

I found a big write up on my engine when i was researching the car. Mine is a 4G69 designation. It is an upgrade they did on a 4G64. they added the mivec. shortened the block by 50mm, lightend all the internals, longer runners on the inlet manifold, increased the stroke and upped the compression. a ...

I have read in some places they are going to release an outlander turbo with the detuned 2.0L turbo motor out of the evos like grantw's. 150kw and supposed to be competitive with the foresster XT. The 2.4L in mine will get me into enough trouble as is let alone another 30kw I know it would be great ...

Would these part be interchangable with a 1989 SWB?
I have coil sprrung rear.

Jason

um i'm not really sure on that, someone hear might know.

i gotta say sorry to all the guys waiting for pics. my damn digi cam is buggered so will borrow one off my brother. trying to build a carport at same ...

well guys i picked up my new car today. its brand new, my 1st brand new car, all 4 wheels are driven, and its a mitsubishi. buuuuuuuuuut its not quite as capable as the old redrocket. i got myself an Outlander VR-X in effect grey which is kinda like a gunmetal grey. its a really well spec'd car and ...

hey sorry guys on no replies to you as yet, just trying to find time but will try and get photos tommorow morn when there is light.

mike.

Hi All,

Some of you know me and some of the more recent members may not as my frequenting of the site has dropped off somewhat the last year. Anyway i have a pretty modded/accesorized 93 NH j-top paj and its come time to move onto another car. As some of you know there is a limited market out ...

to go back on subject she is far from a fat bride. what tonka "assumed" was that she may be fat, much more delicate words should have been chosen. how much room differance is there between a h1 and h2?

ToNkA wrote:Or if she is Fat.

Thats pretty rude!!

Does anyone know of anyone who owns a hummer h1 or h2 that does wedding runs, as in pick up and drop of the bride??

righto just a thought. prob a hard job unless i had a front cut or similar. just weighing up a few options. prob stick with the 5spd and fix few things on the motor. only really the valve stem seals which i might just get the heads reco'd and be nice and clean up top.

How much differance would there be in order to do this?

Hi there ppl's. Remember me! I'm back. OMG frank how cool is your car! grantw why is your paj on carsales? scott you will kick my ass off road now. Its been a while i know but i bought a house start of year and all my money and time have been going into that. but, going to fraser in 2 weeks so that ...