Outer Limits 4x4 Board

Hay Sam, i'm not very happy with you, you need to look at the badge on the front of my fourby, a good hard look, it spells t o y o t a. i'm not a 100% shore who did the write up in the dirt comp mag round 2, but it is wrong there too,shame on you girl. john

Hi Guys Just spent the last week and a half cleaning the middy up from round 2. Fitted a new heavy duty tail shaft and bigger bolts to hold the rear axles in. These were a problem in round 2 that was created by the new injector pump which was installed. All should be good for this round. Got myself ...

Been working on the middy for the last two weeks haven't done a thing to it since the logan challenge and the 8 day. Thought it was time to blow the dust off and get the old bus ready. Thought I would throw some money at the injector pump because it was running pretty sluggish. Gave it to Shane at ...

no need for body lift because tyres fit under guard at full travel up. thay touch a little but not enough to worrie about, if so, fit rear bump stops to front, thay are a little longer. a body lift reduces you roll-over angle, our cruises have a narrow track and are tall to start with. so don't lift ...

yes, well that's about as big as you can go with-out attracting trouble. as far as rwc, not shore

QLD 4x4 club have a few 4bees going. I am unable to go,just got back from 10 days at Innaminka, still couching up with things. Its a nice property its held on

i have a 3b for sale in car hear running $2000 there are no 15bt in aus, all ready tried that, only one 15b on gold coast

still waiting for new bits to up the ponies in my middie, so ive decided to play once more before i pull the 13bt yota mota down. found a problem with my winch. could not understand why it ran slower than some other 12v motors. all good now. see ya all there

John

if running 6 hp motor use large solynoids on in side. see ARB thay list these for there hi mount 6 hp model or use 4 small ones for in as these cant carry amps using only 2 or talk to david matcalf at extreme 4x4 sport .com.au for a one peice unit that we are all starting to use now. use large leads ...

I HAVE BEEN THERE DONE THAT.I HAVE A BJ73 THAT I DO WINCH CHALLANGES. I REPLACED MY 3B WITH A 13BT, THE CLUTCH IS REUSED, BUT MAKE SURE THE PRESURE PLATE IS STRONG, AROUND 800LB CLAMP. THE RETURN FUEL LINE MUST GO TO TANK.NEED IGN POWER TO VACCUM SHUT OFF SOLINOID, USE ONE OF THE PINS IN THE EDEC ...

why 2 inch lift? i run 36 inch simex with only 25 mm and thay only just rub in top of front guards. put rear bump stops in front and it stops that. my middie does the winch challanges and 8 day. since then, a new chassis has been fitted, so i cut the mounts of chassis and lifted them 32mm. now it ...

i have a mwb i race in the winch challanges. did the 8 day on leafs. now i have coils all round. bundy in front, rangie in rear. used my diffs. took a front and rear chassis cut of boath 4bees, unpicked the mounts and welded them to my chassis. had to use 80 series panard upside down, make my own ...