Outer Limits 4x4 Board

hehe sounds just like mine! mine has 380,000 on it is quite clean considering i picked it up for $4500!!! i'll try get some picks up havnt got round to taking photos of it yet.
mine also has broken that same stud! but isnt wistleing and cbf replacing it.
fridge isnt working yet cos a/c is ...

hey troy nice firts car!! i've just purchased one of these myself and love it !! you might also want to check your exaust gaskets or manifold i have seen or heard a few exaust leaks that sound like squeeling belts or whisle and found it to be a leaking exaust manifold gasket which would explain why ...

had rims flipped for about $45 each at ajax wheels in melbourne made my bundy look tough as, added around 6" to standard wheelbase

they do fit, mine is sitting in the driveway with them in, coils were cheap running standard in front and pedders standard height progressive rates in rear as dumbdunce suggested. When i spoke with the bloke at pedders he said that the early 80 series carby ones i think? coils were longer so got ...

yeh havn't had much luck with this either as the air filter is on the LHS where as all the 70 series ones are on the right im just gonna make one up, will cost a shitload less and if done right will probobly suit it better

found this one, not the best pics but u get the idea. I used to have one in these colors looked alright but lost all the pics cos stupid comp HDD died, hey where abouts in melb did you get the touno cover for your ute as i need one made for my bundy.
http://users.bigpond.net.au/lachlan/car ... ics_1.html

have spoken to dumbdunce about lift on bundys he reckons keep em low with 33's and lock the diffs

have also hit the same problem when building up my beast, considered going for the 80 series springs but an 80 series is alot heavier than a bundy and therefore the springs would be alot stiffer also i cant see it increasing articulation because the axles wouldn't drop much further than at ride ...

how much did you pick the 7mgte for ?

cheers

i got an air chisiel wanna use that

few pics ive found on web will try and get some of mine on but is still a heap and wont give u any ideas YET

http://www.brian894x4.com/Lj70fenchbundera3.jpg
notice the snatch to the jeep
http://www.brian894x4.com/87Bruneibundera2.jpg
http://www&#46 ...

true but if u were to turn it over by hand the water sitting ontop of the valve from the leak should leak into the cylinder

u could use a teekay head check otherwise but u will need to find a workshop that has one, most do

get it hot
take the plugs out
pressure test the cooling system wait about 5 min
crank it over and check for water coming out the plug holes
or put cold screwdrivers in the holes and see if condensation forms on them (dont crank with screwdrivers in it )
hope this helps
if it comes out ok ...

$2300
its a soft top version
drivers door was screewd had hit a tree or something
suspension is stuffed
drivline is good
needs bit of work to get it on the road

hey daniel
so 80 series front springs on front and rear raised or non raised for a 4 inch lift?
cheers bud

thanks bundyboy

what i was thinking suspension wise was about 2' suspension lift and 2' bodylift, just to clarify not giving crap or anything you have raised the body off the chassis with the 2' bodylift . will probobly try and get some wheel spacers or something to help out with the widening of ...

hey blokes just picked up a rj70 about a week ago and am planing a few mods i need to know a few things,
i am planing on running 36x12.5x15 simex extream trekker 2's

what diff ratio should i run if i also plan on having a set of 33" road tyres?
(will only be using pinion and crownwheel as i am ...