Outer Limits 4x4 Board

Thanx!

I'll try!

Yeah ok !
But why bother when I can get them all finished for around 50 $ !?
I know they exist..... just don't know where !!!


cheers
Thomas

Hi guys !

I am looking for some of these wind deflectors ( side doors ) for my oneten with 2-piece doors and sliding windows.

The ones for the modern Defender don't fit !
Mine are more like the windows from the Series III.
So I would need the ones you just stick onto the window frame ...

ORDERED !!!

MS kit & stimulator kit


Now I belong to the familly !!!


Let´s hope I get it running !!!

No! Those are not the green ones I was talking about !

I meant the ERR 6600 disc type ones!
But it doesn`t really matter.
After I had a closer look on the green ones today I am no longer
convinced of them anyway....I will stay with my black ones!

I´ve been so free to complete your ...

Hi fridgefreezer !

Congratulations !
I compared the black injectors today with the green ones of a friend of mine .

The black ones have the typical `center needle´ on the injection end..... the green ones are different...they have 4 tiny holes instead !!!
Have a close look on yours ...

Wow fridgefreezer !

That´s what I call detailed answers ! Thanx a lot !!!

-Fuel temp and speed sensors:
Cool ! Wasn´t keen on using them anyway.

-Injectors:
What I know is that they are not exactly the same.
3.5l grey ones
3.9l black ones
4.6l green ones
The black and green ones take ...

Hi Fridgefreezer!

Last friday my 3.9 engine arrived..... looks stunning !
I started straight away checking out the injection system.

Now I have a bunch of futher MS questions.


1. Extra air valve / bypass valve

The 3.5 efi system uses this grey extra air valve which sits on the front ...

Yepp!!!!
Had the same prob for a long time ( LT95 ).

In my case it was simply the switch. Sits on top of the gearbox.

Good luck !

ARB sell the bits to convert them, but they are not cheap. It worked out about half the price of a new difflock. So I put the 10 spline locker in the front and purchased a new 24 spline for the rear and Maxidrive axles.


Can you simply do that...putting the rear ARB in the front axle ...

Hi Rangee !

Throttle diameter are the same on 3.5 and 3.9 plenums.
It is 65mm !!!
Doesn´t do any differences if you put on a 3.5, 3.9, or 4.6 plenum !
The standart plenum supplies already quite enough breathing up to 300 horse power engines!

( I am building a medium tuned 3.9 l engine at ...

@ Isuzurover


Don´t know yet!
A friend told me the Castrol...but I can´t tell you now if it is that one you are talking about !


@ Dave
( my numberplate is Photoshoped
.... not that you think Germans are that stupied that they woult put only two letters on such an inormous plate ! )

DaveS3 wrote:Certainly differernt to Aussie cars.

Love the number plate.

Dave.

Hi Dave!

Love your avatar!



bye the way...it was washed and polished that day...... I do make it dirty from time to time!

@ Isuzurover

That was fast !

Sliding windows YES....LT230 NO.

The first onetens had the LT95 ( 4-speed) with integral transverbox.
But I have a new LT85/LT230 ready to be build in soon.

The same to you when you are close to Nürnberg!

Here you go !!!!

http://www&#46 ...

Hello Isuzurover !

Poor guy! Are you suffering from this s_h_i_t German weather just as much as I do ???

I live in Nürnberg ( nuremberg ).

And yes you are right.
After all my investigation work I couldn´t find any oneten in Germany with a lower serialnumber than mine has.
My landy was ...

Hi fridgefreezer !

That thing with the swirl pot is new for me and an absolut excellent solution in my case.

Because I own one of the first built onetens from 1983 I still have the version with the external fuel pump/ filter that sits on the side of the frame ( .... not tank internal like ...

Hi fridgefreezer !

Thanx for your opinion!
I know your homepage for quite a while. Very interesting!!!
When I am coming to that point it would be fantastic if I may come back to you for the base mapping and if necessary some more advice.


Thomas

An other question to this topic...........


Seeing that I am going to throw out the old 3.5l carb engine and fix a new rebuild 3.9l one ( with a couple of modifications ) ......
my idea was to get it first running on the original hotwire efi system with the 14CU ECU.....
and afterwards fix a ...

Hi folks !

I just registered new in this forum because I read this thread quite interested.

I am building a 3.9 liter Rover V8 for my Landrover 110 and I am already playing with the idea to use the MegaSquirt system since quite a while.

Especially because I going to tune the engine a little ...