Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Search found 483 matches

by Simo63
Thu May 30, 2013 1:22 pm
Forum: Nissan
Topic: Can I put a GQ RD28 into a GU RD28?
Replies: 1
Views: 655

Can I put a GQ RD28 into a GU RD28?

I've asked this on the Patrol 4x4 forum as well but thought I would mention it here in case some don't get over there to see it.

Okay just before I launch into the TD42 engine conversion I was planning, I want to make sure that I can't get this thing back on the road easily and economically so I ...
by Simo63
Thu May 30, 2013 1:20 pm
Forum: Nissan
Topic: Urgent advice on TD4.2 conversioninto GU TD2.8
Replies: 2
Views: 683

Re: Urgent advice on TD4.2 conversioninto GU TD2.8

Bowie wrote:I know its not very constructive but as if anyone is going to check. That particular body shape comes out with that setup so i'd just do it and don't worry about the bacon.
Lol, thanks Bowie. I think I've got it sorted now anyway. No mod plate required apparently :armsup:
by Simo63
Wed May 29, 2013 9:06 am
Forum: Nissan
Topic: Urgent advice on TD4.2 conversioninto GU TD2.8
Replies: 2
Views: 683

Urgent advice on TD4.2 conversioninto GU TD2.8

Apologies if this topic has already been covered elsewhere but I urgently need some advice regarding this conversion.

I'm just about to start on this and have been speaking with my mechanic who has thrown doubts that I can legally put a 1989 TD4.2 motor into a 1999 GU TD2.8 car without undergoing ...
by Simo63
Wed Jun 27, 2012 10:17 am
Forum: Dmax / Isuzu / Holden / Great Wall
Topic: how long should a clutch last in dmax
Replies: 3
Views: 1688

Re: how lond should a clutch last in dmax

A clutch can last a long time or a short time depending on how's it's used and abused. I read that you said your old man doesn't ride the clutch etc so it should last longer than 95,000 kms but if it is showing signs of wear and if the box is already out it wouldn't hurt to invest in a new clutch ...
by Simo63
Mon May 14, 2012 2:16 pm
Forum: Rover
Topic: My tdi300 is doing my head in
Replies: 3
Views: 1024

Re: My tdi300 is doing my head in

Have you checked the engine number of the motor you put into the new body to confirm it's the one you had in your old girl :D
by Simo63
Thu Aug 11, 2011 11:22 am
Forum: Rover
Topic: P76
Replies: 4
Views: 899

Re: P76

I am thinking of pulling my efi 3.5 out of my rangie and putting a p76 in what are peoples views on this engine would I be gaining much power and what parts can I use of my 3.5 im running a zf with high tough axles in the rear thanks for any feedback

Plenty of thread on it in the archives if you ...
by Simo63
Mon May 30, 2011 10:57 pm
Forum: Cruiser / Prado
Topic: 80 series ABS Brakes
Replies: 15
Views: 984

Re: 80 series ABS Brakes

Ok.........

So after a new master cylinder being fitted, full brake system flush and the removal of the ABS fuse, The brakes are no different at all. The Pedal will come up after giving it a good pump before you want to slow the cars down.

Would it be worth removing the ABS system completley and ...
by Simo63
Mon May 30, 2011 3:49 pm
Forum: Cruiser / Prado
Topic: 80 series ABS Brakes
Replies: 15
Views: 984

Re: 80 series ABS Brakes

I'd rather drive the 80 without ABS. I'ts more dangerous than safe off road. My 80 gave me shits trying to stop out on the tracks when in high range. I know the ABS turns off when in low but I wanted it off in high too. :bad-words:

Mate I know what you mean .. ABS combined with a lifted 80 on ...
by Simo63
Sat May 28, 2011 6:01 pm
Forum: Cruiser / Prado
Topic: 80 series LEMON!!!
Replies: 32
Views: 2390

Re: 80 series LEMON!!!

:lol:

You aren't looking at my avatar are you? That's an 80 series.

But seriously, even though I love my fzj80, and have had a 1hz 80, I would never by a td 80. That is unless it cost 1000 dollars and already had a blown motor.

OMG I need to get my eyesight checked .. guilty as charged officer ...
by Simo63
Fri May 27, 2011 10:20 pm
Forum: Cruiser / Prado
Topic: 80 series ABS Brakes
Replies: 15
Views: 984

Re: 80 series ABS Brakes

The brakes won't be much different in operation with or without the ABS sensors (aside from the obvious ability to lock them up). Assuming that the brakes worked fine before the lift, it sounds to me like your problem is a lot to do with the brake proportioning system. I know you said you used the ...
by Simo63
Fri May 27, 2011 9:24 pm
Forum: Cruiser / Prado
Topic: 80 series LEMON!!!
Replies: 32
Views: 2390

Re: 80 series LEMON!!!

Mate you need to change the title of your thread .. you can't call a 16 year old car with unknown kilometres (although you said it's had a hard life in your post) and history on it a LEMON. And anyway the items you list are basic maintenance aside form the whirring which you caused by lifting and ...
by Simo63
Fri May 27, 2011 3:33 pm
Forum: Cruiser / Prado
Topic: 80 series LEMON!!!
Replies: 32
Views: 2390

Re: 80 series LEMON!!!

Mate you need to change the title of your thread .. you can't call a 16 year old car with unknown kilometres (although you said it's had a hard life in your post) and history on it a LEMON. And anyway the items you list are basic maintenance aside form the whirring which you caused by lifting and ...
by Simo63
Mon Mar 14, 2011 12:50 am
Forum: Ford / Mazda / Daihatsu / Homeless
Topic: Kia Ceres 4Wd is based on a ??
Replies: 2
Views: 1251

Kia Ceres 4Wd is based on a ??

Mazda E2200 maybe? Or something similar?

Only asking because I picked up one this evening that needs a bit of work, nothing huge, just a tidy up and wanted to know if there were other donor cars/brands etc around.

What say you Korean Kar Kings :armsup:
by Simo63
Fri Jul 09, 2010 1:45 pm
Forum: Cruiser / Prado
Topic: 98 80series 1fzfe has no oxy senors why or cat ???
Replies: 2
Views: 227

Re: 98 80series 1fzfe has no oxy senors why or cat ???

I'm not too sure. As far as I can work out my 1993 has one O2 Sensor before the Cat, and that is all. I was looking to get a new exhaust, but the ones I have seen do not have cats. Does anyone know why or am I missing something? I thought all cars post 1986 or what ever it was had to have cats ...
by Simo63
Fri Jun 04, 2010 2:14 pm
Forum: Cruiser / Prado
Topic: 1HDT + auto box and transfer case
Replies: 2
Views: 427

Re: 1HDT + auto box and transfer case

hey guys looking at doing a convsersion in my 80 just wondering how much would l for selling my current engine tranny and transfer case

my car has 285000 kms

thanks

Mate, I'll swap you a complete VNSS with a good 304EFI and Auto (has some front damage) for your 1HDT and auto if you like. Will ...
by Simo63
Tue Jun 01, 2010 9:38 am
Forum: Cruiser / Prado
Topic: STRAIGHTEN OUT A 80.
Replies: 3
Views: 654

Re: STRAIGHTEN OUT A 80.

Hey Guys,
I tapped a stump in my 80 and now my passenger side chassis rail is bout a inch or 2 towards the rear of the car. Anyone know anyone with a chassis rig or anyone recomended in S.E Vic???

Thanks

Alex

1 or 2 inches bent .... and only tapped the stump???

Most panel beaters have the ...
by Simo63
Thu May 27, 2010 8:29 am
Forum: Nissan
Topic: DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10
Replies: 188
Views: 45707

heathgu wrote:Image
Hey Heath

Is this the motor that I heard might have cost the original owner something like $50K to build?

Cheers
by Simo63
Thu May 13, 2010 9:34 pm
Forum: Rover
Topic: I bought a Nissan!!!
Replies: 11
Views: 1431

One day you silly rover fools will see the light.

I no longer have any oil stains on my driveway and can safetly run 31s with 6 inches of lift!!!

ya got that deadly steerin shimmy/wobbles? that nissans have??

unfortunately yes :cry:

i also have no ride comfort, and a severe lack of front ...
by Simo63
Wed Mar 10, 2010 11:24 pm
Forum: Cruiser / Prado
Topic: Help with 80 Series Temp Gauge
Replies: 2
Views: 311

Gday.
Try taking the wire off temp sender and see if guage still goes up with key on.If it doesnt go up it should be the temp sender.If it still goes up with wire off it may be wire to sender unit is earthing out or guage is shagged.
Hope that helps

Hey Auscruzer, thanks for the reply you were ...
by Simo63
Wed Mar 10, 2010 9:15 am
Forum: Cruiser / Prado
Topic: Help with 80 Series Temp Gauge
Replies: 2
Views: 311

Help with 80 Series Temp Gauge

Hi all. Had a very concerning experience driving back from Brisvegas to the Sunny Coast last night in my TD 80 Series. Cruising along and doing my usual scan of the instruments when I noticed the engine temp guage sitting right on the red :shock: . Pulled over, check for anything obvious .. nothing ...
by Simo63
Tue Feb 23, 2010 3:20 pm
Forum: Cruiser / Prado
Topic: McNamara diff locks for 105
Replies: 3
Views: 510

T_Diesel wrote:What's the price like on the McNamara lockers?
3 Sheckels and 2 Barnsey :D
by Simo63
Wed Feb 17, 2010 8:55 am
Forum: Nissan
Topic: NEW 5.6-litre V8 Patrol
Replies: 5
Views: 1122

that maybe but bogged but this is only one so far that isnt rumors and conjector
it was released in abu dhabi on monday night and after reading the article

what we have feared for a long time has been confirmed ifs & irs :cry: :bad-words:
well looks my gq just went up in price

cheers

Yeah it ...
by Simo63
Tue Feb 16, 2010 12:37 pm
Forum: Nissan
Topic: Assistance required for Terrano Auto
Replies: 1
Views: 287

Assistance required for Terrano Auto

A mate of mine purchased a 1990 or 91 Import Terrano turbo diesel last week and noticed on the 300 kms drive home that when he was cruising at highway speeds the moment he touched the accelerator pedal the auto would kick back to 2nd and scream the little diesel's head off.

Normally I would suspect ...
by Simo63
Thu Feb 04, 2010 1:56 pm
Forum: General Tech
Topic: Range rover Diffs in a 88GQ
Replies: 14
Views: 1601

This same question has been posted by the same person in the Rover, Nissan and now Gen Tech areas. Can I hear the bus warming up?
by Simo63
Tue Feb 02, 2010 10:35 am
Forum: General Tech
Topic: ute chops and cages on the sunshine coast
Replies: 11
Views: 858

Re: ute chops and cages on the sunshine coast

i have searched and i have found paul from Kustom cages doesnt do it anymore as he is starting a new business

:shock: bugger. What's the new business??

You can try Marty at Image body works for the ute conversion .. he's done most of the ones around the Coast here and is at Bli Bli. Call him on ...
by Simo63
Tue Feb 02, 2010 10:33 am
Forum: Rover
Topic: Modded my Rangie...Now The EVOLUTION of Bob! More pics up...
Replies: 377
Views: 72710

Less talkie talkie and more pics please :D
by Simo63
Thu Jan 28, 2010 11:59 am
Forum: Cruiser / Prado
Topic: 80 Series, Barn Doors....
Replies: 25
Views: 1976

OK, there seems to be a bit of confusion as to whats what in the world of 80 series.

The DX (base model) is a barn door diesel non turbo model. It was the pov pack with vinyl interior, no electics, no flares, fixed rear windows, no 3rd row seating, split rims, no tacho and even no bonnet struts ...
by Simo63
Mon Jan 25, 2010 2:00 pm
Forum: Nissan
Topic: gu 4.2 ute chassis and gu 4.2 wagon chassis
Replies: 12
Views: 1246

Except for the rear, the length is different at the rear member (towbars are not interchangeable) and the engine mounts vary depending on what engine was in it. There are about 25 chassis's listed for GU according to Nissan. The front can vary depending on the radiator fitted also.
The chassis ...
by Simo63
Fri Jan 15, 2010 10:00 am
Forum: Nissan
Topic: Older GU's
Replies: 7
Views: 1088

RIZZO wrote:said 5th gear shit itself, "apparently nissan fixed this problem in 01 or 02 i was told"
Right .. was that at the same time they fixed the ZD30 hand grenading issue? :finger: :rofl:
by Simo63
Tue Jan 12, 2010 9:57 pm
Forum: Rover
Topic: new buyer
Replies: 6
Views: 695

Re: new buyer

hiya same here new ,owner thinkn of shift from toyota hiluxs to this ?
is the auto box in a 87 rangie tuff? how hard is it to repair shifter dramas losing reverse? do they make manuals?.are they diff locks std,?

Gives new meaning to the phrase "I can't understand the youth of today" :roll: