Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Search found 3 matches

Go to advanced search

by iggy
Sun Dec 26, 2004 10:35 pm
Forum: Mitsubishi
Topic: 89 NF V6 3.0 Running rough when warm
Replies: 4
Views: 324

Woo Hoo !!! I fixed it.. On Wednesday it started running particularly rough so I pulled up on the side of the road and on a hunch pulled the distributor cap and rotor off (both are new), under these is a cover plate which when removed exposes the optical encoder wheel and sensors. The very fine ...
by iggy
Mon Dec 20, 2004 4:59 pm
Forum: Mitsubishi
Topic: 89 NF V6 3.0 Running rough when warm
Replies: 4
Views: 324

Hi Scott, The coolant sensor is fine, I even put a 2k7 resistor across the terminal to make the ECU think it was set to 20C. This kept the idle high (as expected) and it ran like a dream until it warmed a bit. The temperature gauge never gets more than about 5mm from cold with an 85c thermostat in ...
by iggy
Sun Dec 19, 2004 8:13 pm
Forum: Mitsubishi
Topic: 89 NF V6 3.0 Running rough when warm
Replies: 4
Views: 324

89 NF V6 3.0 Running rough when warm

G'day, I've just bought a 1/89 NF station wagon for (AU)$1500. It has 437,000km on the chassis and about 40,000km on the engine, new tyres, battery, timing belt, distributor, leads, plugs. I have changed the oil and filter, fuel filter, coil, power transistor, capacitor and thermostat. Whether cold ...

Go to advanced search